| |
:::::::::::::::::::
:: FLEXNET SYSOP ::
:::::::::::::::::::
(only sysop)
Syntax: SYSOP
See also HELP FLEXNET PW
Overview of all sysop commands:
CAL <port> [min|0] send <min> minutes a calibration signal on
channel <port>; default value without any
time parameter is 1 minute; "0" stops any
calibration signal on channel <port>
Kill <QSO-Nr.> delete one QSO from user table
Links <port|link> <call> [#|$|-|@|>|!|)]
route link <call> on channel <port> or via
call entry <link>; use options if needed
Links - <call> delete link <call>
Mail <call> set <call> as BBS call
MYcall <call> [ssid1 ssid2]
set <call> as digi mycall, SSID range can be
defined with <ssid1> to <ssid2>
MOde <port> <mode> set <mode> at channel <port>
Parms S <ssid> <port|16> set SSID <ssid> at channel <port>
Parms T <txdelay> <port> set TXDelay at channel <port>
PW get SYSOP string query (baycom type)
SYsop get SYSOP string query (baycom or flexnet type)
TRace <port> [call] [Opt.] trace channel <port>; if you want to trace only
one call, add this call as parameter
TRace terminate trace mode
WRITE <A|B|C|H|I|L|S> writes textfile (terminate with /ex or ^Z)
The overview of user commands are shown with HELP FLEXNET CMD.
See also HELP FLEXNET <subcommand>:
AKTUELL BCM BEACONS CMD CONVERS INFO IO L2STATES LINK
LOCAL MHEARD MODE PARMS PW RESET RESTART SETSEARCH TRACE
WRITE
The connection between BCM and Flexnet is discribed in HELP FLEXNET BCM.
| |
