| |
::::::::::::::::::
:: FLEXNET MODE ::
::::::::::::::::::
(only sysop)
MODE <channel> <mode>
You can define speed and channel options with MODE command of each single
channel. Speed can be a multiplier of 300 Bit/s; the following two 0 must
not be added.
channel mode options are:
<num>- speed (only valid with internal tact)
"c" - with CRC-KISS or software-DCD (e.g. SCC cards, baycom modem)
"d" - fullduplex channel (default: halfduplex)
"m" - DAMA master
"r" - external, hardware receive tact (e.g. G3RUH modem)
"s" - channel synchronisation (e.g. two channels on one frequency)
"t" - external, hardware send tact (e.g. G3RUH modem)
"u" - user channel (txdelay measurement, DAMA master)
"y" - auto-sysop (every time sysop without password)
"z" - NRZ code (e.g. DF9IC modem), in other case NRZI
"-" - switch of this channel
"." - dummy, if no other parameter is needed
Examples: 1) "mode 2 12cmu" : 1200-Bit/s user channel with serial
BayCom modem and DAMA mode on channel 2
2) "mode 3 96dtrz": 9600-Bit/s fullduplex with DF9IC-FSK
modem at channel 3
3) "mode 4 -" : switch off channel 4 (is not working
with every driver!)
The accurate function of each parameter depends on driver, not every driver
supports all parameters.
| |
