| |
I0OJJ > XNET 26.03.08 19:00l 106 Lines 2845 Bytes #999 (0) @ ITA
BID : Q3II0OJJ_082
Read: GUEST
Subj: Re^2: Uso corretto dei SSID in Xnet
Path: IZ3LSV<IW2OHX<IK2QCA<I4UKI<I0OJJ
Sent: 080326/1510z @:I0OJJ.ILAZ.ITA.EU [Colleferro] obcm1.07b3
From: I0OJJ @ I0OJJ.ILAZ.ITA.EU (Gus)
To: XNET @ ITA
X-Info: Sent with login password
From: IZ1FRP @ IR1BOX.ILIG.ITA.EU (Matteo)
To: XNET @ ITA
X-Info: Received by NNTP-gateway
>Ciao a tutti
>
>quello che scrive Marco è sacrosanto....
>Non e' la prima volta che inoltra il messaggio del polacco....
>
>Grazie ancora per essere ritornato sul tema SSID....
>
>
><iw2ohx@iw2ohx.ilom.ita.eu> ha scritto nel messaggio
>news:M3IIW2OHX06Y@IR1BOX...
>> Ciao Gus e ciao a tutti gli utilizzatori di Xnet!
>>
>> con questo bollettino voi spiegare l'utilizzo corretto dei SSID in XNET,
>> e sarebbe il caso che i SysOp italiani, che solitamente hanno poca
>> voglia di leggere i manuali, si adeguino a tale tipo di configurazione.
>>
>> Intanto inoltro un bollettino di un OM polacco che allerta un altro
>> collega a proposito dell'utilizzo dei SSID.
>>
>> Leggete (in lingua inglese):
>>
>> ---
>> Hi to all,
>>
>> I want to forward again this important bulletin
>> where Jarek explain SSID correct settings.
>>
>> Pay attention how you set your XNET node !!
>> Read manual first! and if you don't understand...ASK!
>>
>> Following bulletin was sent by Jarek on 12th Oct 2006,
>> but at the moment the situation isn't changed.
>>
>> Marco
>> iw2ohx
>>
>> ---------
>> From: SP9SPW@SR9ZAA.#KRA.POL.EU
>> To : XNET@WW
>>
>> Hi Didier and All
>>
>> Hi Jarek...
>>
>> The node use only ONE CallSign SID TR0A-7
>> TR0A-1 is the FBB BBS
>> TR0A-3 is the DxCluster
>> TR0A-8 is the FPAC node
>>
>> It's ONE CALLSIGN FULLY SID ???
>> Where is your problem Jarek ?
>>
>> vy73 de Didier, TU5EX
>>
>>
>> Look at flexnet destinations - you will see 4 callsigns, not one.
>> Why? Because in flexnet destinations each CALL with SSID is
>> different callsign.
>> OK, try to declare local links as Proxy links (not FlexNet) and
>> 'main' node (Xnet) as TR0A 0-15 (ro f pa ssid 15).
>> Now in flexnet destinations you dont see :
>> TR0A 1-1 TR0A 3-3 TR0A 7-7 TR0A 8-8
>> but:
>> TR0A 0-15
>> and all connections from all of the flexnet network are route
>> directly to FBB, DXC, FPAC...
>>
>> For example - look at SR9ZAA Xnet node. Here is 5 services with
>> 5 SSIDs but only one callsign in network in flexnet destinations
>> table. From IGATE try to connect to SR9ZAA-8 (FBB) - you get it!
>> Same for Tnos (-10), DXCluster (-12), WWConvers (-14)...
>>
>> This is very important pThis is very important possibility in Xnet! Why
>> don't use it
>> to save flexnet network??
>>
>> 73! Jarek SP9SPW
>> ---
>>
>>
>
>
>
>--
>'73 de IZ1FRP Matteo
>
>p-mail BCM:
>IZ1FRP@IR1BOX.ILIG.ITA.EU
>
>e-mail
>iz1frp@yahoo.it
>
>Message sent with Outlock Express + Open BCM
>
>
>Ciao Matteo e a tutti,
>questa mattina ho cercato di ottimizzare i settaggi di XNET tenendo
in debito conto quanto riportato nei msgs...
73,
Gus i0ojj
Read previous mail | Read next mail
| |
