| |
IZ1FRP > XNET 26.03.08 00:00l 99 Lines 2510 Bytes #999 (0) @ ITA
BID : P3IIR1BOX6RH
Read: GUEST
Subj: Re: Uso corretto dei SSID in Xnet
Path: IZ3LSV<IW2OHX<IR1BOX
Sent: 080325/2136z @:IR1BOX.ILIG.ITA.EU [OpenBCM] OBcm1.06
From: IZ1FRP @ IR1BOX.ILIG.ITA.EU (Matteo)
To: XNET @ ITA
X-Info: Received by NNTP-gateway
Ciao a tutti
quello che scrive Marco è sacrosanto....
Non e' la prima volta che inoltra il messaggio del polacco....
Grazie ancora per essere ritornato sul tema SSID....
<iw2ohx@iw2ohx.ilom.ita.eu> ha scritto nel messaggio
news:M3IIW2OHX06Y@IR1BOX...
> Ciao Gus e ciao a tutti gli utilizzatori di Xnet!
>
> con questo bollettino voi spiegare l'utilizzo corretto dei SSID in XNET,
> e sarebbe il caso che i SysOp italiani, che solitamente hanno poca
> voglia di leggere i manuali, si adeguino a tale tipo di configurazione.
>
> Intanto inoltro un bollettino di un OM polacco che allerta un altro
> collega a proposito dell'utilizzo dei SSID.
>
> Leggete (in lingua inglese):
>
> ---
> Hi to all,
>
> I want to forward again this important bulletin
> where Jarek explain SSID correct settings.
>
> Pay attention how you set your XNET node !!
> Read manual first! and if you don't understand...ASK!
>
> Following bulletin was sent by Jarek on 12th Oct 2006,
> but at the moment the situation isn't changed.
>
> Marco
> iw2ohx
>
> ---------
> From: SP9SPW@SR9ZAA.#KRA.POL.EU
> To : XNET@WW
>
> Hi Didier and All
>
> Hi Jarek...
>
> The node use only ONE CallSign SID TR0A-7
> TR0A-1 is the FBB BBS
> TR0A-3 is the DxCluster
> TR0A-8 is the FPAC node
>
> It's ONE CALLSIGN FULLY SID ???
> Where is your problem Jarek ?
>
> vy73 de Didier, TU5EX
>
>
> Look at flexnet destinations - you will see 4 callsigns, not one.
> Why? Because in flexnet destinations each CALL with SSID is
> different callsign.
> OK, try to declare local links as Proxy links (not FlexNet) and
> 'main' node (Xnet) as TR0A 0-15 (ro f pa ssid 15).
> Now in flexnet destinations you dont see :
> TR0A 1-1 TR0A 3-3 TR0A 7-7 TR0A 8-8
> but:
> TR0A 0-15
> and all connections from all of the flexnet network are route
> directly to FBB, DXC, FPAC...
>
> For example - look at SR9ZAA Xnet node. Here is 5 services with
> 5 SSIDs but only one callsign in network in flexnet destinations
> table. From IGATE try to connect to SR9ZAA-8 (FBB) - you get it!
> Same for Tnos (-10), DXCluster (-12), WWConvers (-14)...
>
> This is very important pThis is very important possibility in Xnet! Why
> don't use it
> to save flexnet network??
>
> 73! Jarek SP9SPW
> ---
>
>
--
'73 de IZ1FRP Matteo
p-mail BCM:
IZ1FRP@IR1BOX.ILIG.ITA.EU
e-mail
iz1frp@yahoo.it
Message sent with Outlock Express + Open BCM
Read previous mail | Read next mail
| |
