OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
VA3HRA > WP       10.10.17 13:34l 58 Lines 2267 Bytes #999 (0) @ EU
BID : 3405_VA3HRA
Read: GUEST
Subj: SB TECH @ WW < G8MNY $60233_GB7CIP
Path: IZ3LSV<IW2OHX<IR2UFV<IR0UGN<SV1CMG<N0KFQ<NS2B<KA3BVJ
Sent: 171010/1028Z 27672@KA3BVJ.PA.USA.NA BPQ1.4.65

Using 2 HF PAs
R:171010/1028Z 3406@VA3HRA.#SWON.ON.CAN.NOAM BPQ6.0.13
R:171010/0756Z 28649@N9PMO.#SEWI.WI.USA.NA BPQ6.0.14
R:171010/0753Z 3470@I0OJJ.ILAZ.ITA.EU $:60233_GB7CIP
R:171010/0636Z @:GB7CIP.#32.GBR.EURO #:60233 [Caterham Surrey GBR]

From: G8MNY@GB7CIP.#32.GBR.EURO
To  : TECH@WW

By G8MNY                                 (New Aug 13)
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)

At an 8 day Ham Summer Camp I needed to use 1 of 2 HF PAs for /P. One was a
500W Transistor PA floated on a large battery that allowed just a small petrol
650W generator to keep the batteries topped up, & the other was a Valve Amp
used in the colder nights & that needed much bigger generators (2.3 / 7kW).

I looked at the 2 possible connection systems...

       FULLY SWITCHED                SERIES RF & TEED CONTROL LINES
              ÚÄÄ¿
        ÚÄÄÄÄÄ´HF³                                ÚÄÄ¿     ÚÄÄ¿
ÚÄÄÄ¿__/. ÚÄÄÄ´PAÃÄ¿                ÚÄÄÄ¿_________³HF³_____³HF³ ÚÄÄÄ¿
³HF ³RF : ³ ÚÄ´1 ³ ³   ÚÄÄÄ¿        ³HF ³RF  _____³PA³  ___³PAÃÄ´ATUÃÄ
³   ³____/. ³ ÀÄÄÙ  \__³ATUÃÄ       ³   ³___³ ÚÄ)Ä´1 ³ ³ ÚÄ´2 ³ ÀÄÄÄÙ
³Rig³PTT: : ³ ÚÄÄ¿ ³   ÀÄÄÄÙ        ³Rig³PTT  ³ ³ ÀÄÄÙ ³ ³ ÀÄÄÙ
³   ³______/..³HF³ ³                ³   ³_____³ ÀÄÄÄÄÄÄÙ ³
ÀÄÄÄÙALC: :...³PAÃÄÙ                ÀÄÄÄÙALC  ÀÄÄÄÄÄÄÄÄÄÄÙ
        :.....³2 ³
              ÀÄÄÙ
The switched system is complex unless relays are used.

The series & teed system assumes PA2 can handle PA1 Tx power in through mode!
Steering diodes my be needed to isolate the powered off PA from affecting PTT &
ALC lines...

      Ú´<ÃÄÄPA1 PTT     Test PTT interaction by keying up
 PTTÄÄ´                 Tx + PA & seeing if connecting the
      À´<ÃÄÄPA2 PTT     unused PA has any affect on Tx/Tx.
                        Add diodes if there is any affect.

      Ú´>ÃÄÄPA1 ALC     Test ALC interaction by setting Tx
 ALCÄÄ´                 + PA to 100W & adding the turned
      À´>ÃÄÄPA2 ALC     off PA. I found no power change so
                        steering diodes were not needed.

Of course NEVER enable both PAs together!


See my Tech bul "T500 M 12V 500W HF Linear", "PTT line for Drake L-4B PA", &
"ALC line for Drake L-4B PA". 


Why Don't U send an interesting bul?

73 De John, G8MNY @ GB7CIP



Read previous mail | Read next mail


 08.09.2024 04:35:51lGo back Go up