| |
IW2OHX > XNET 27.03.08 00:00l 135 Lines 3529 Bytes #999 (0) @ ITA
BID : Q3IIW2OHX05B
Read: GUEST
Subj: Re: Uso corretto dei SSID in Xnet
Path: IZ3LSV<IW2OHX
Sent: 080326/1957z @:IW2OHX.ILOM.ITA.EU [Bollate(MI)] obcm1.07b3
From: IW2OHX @ IW2OHX.ILOM.ITA.EU (Marco)
To: XNET @ ITA
X-Info: Received by NNTP-gateway
Bene....
il tema dei SSID è importante perche' se non ricordo male
i nodi RMNC/Flexnet e PC/Flexnet hanno una limitazione
a 600 Destinations nella tabella D.
Quindi se entrano in tabella destinazioni raddoppiate si toglie
il posto a quelle legittime, ma con un delay maggiore.
Se qualcosa non fosse chiaro approfondiamo l'argomento.
Marco
--
---
OpenBCM Gateway NNTP><AX25
http://iw2ohx.ampr.org:8060
---
Marco Di Martino
Bollate (MI)
www.marcodimartino.it
www.iw2ohx.net
-
Amateur Radio: IW2OHX
IW2OHX@IW2OHX.ILOM.ITA.EU
---
<i0ojj@i0ojj.ilaz.ita.eu> ha scritto nel messaggio
news:Q3II0OJJ_082@IW2OHX...
> To: XNET @ ITA
> X-Info: Received by NNTP-gateway
>>Ciao a tutti
>>
>>quello che scrive Marco è sacrosanto....
>>Non e' la prima volta che inoltra il messaggio del polacco....
>>
>>Grazie ancora per essere ritornato sul tema SSID....
>>
>>
>><iw2ohx@iw2ohx.ilom.ita.eu> ha scritto nel messaggio
>>news:M3IIW2OHX06Y@IR1BOX...
>>> Ciao Gus e ciao a tutti gli utilizzatori di Xnet!
>>>
>>> con questo bollettino voi spiegare l'utilizzo corretto dei SSID in XNET,
>>> e sarebbe il caso che i SysOp italiani, che solitamente hanno poca
>>> voglia di leggere i manuali, si adeguino a tale tipo di configurazione.
>>>
>>> Intanto inoltro un bollettino di un OM polacco che allerta un altro
>>> collega a proposito dell'utilizzo dei SSID.
>>>
>>> Leggete (in lingua inglese):
>>>
>>> ---
>>> Hi to all,
>>>
>>> I want to forward again this important bulletin
>>> where Jarek explain SSID correct settings.
>>>
>>> Pay attention how you set your XNET node !!
>>> Read manual first! and if you don't understand...ASK!
>>>
>>> Following bulletin was sent by Jarek on 12th Oct 2006,
>>> but at the moment the situation isn't changed.
>>>
>>> Marco
>>> iw2ohx
>>>
>>> ---------
>>> From: SP9SPW@SR9ZAA.#KRA.POL.EU
>>> To : XNET@WW
>>>
>>> Hi Didier and All
>>>
>>> Hi Jarek...
>>>
>>> The node use only ONE CallSign SID TR0A-7
>>> TR0A-1 is the FBB BBS
>>> TR0A-3 is the DxCluster
>>> TR0A-8 is the FPAC node
>>>
>>> It's ONE CALLSIGN FULLY SID ???
>>> Where is your problem Jarek ?
>>>
>>> vy73 de Didier, TU5EX
>>>
>>>
>>> Look at flexnet destinations - you will see 4 callsigns, not one.
>>> Why? Because in flexnet destinations each CALL with SSID is
>>> different callsign.
>>> OK, try to declare local links as Proxy links (not FlexNet) and
>>> 'main' node (Xnet) as TR0A 0-15 (ro f pa ssid 15).
>>> Now in flexnet destinations you dont see :
>>> TR0A 1-1 TR0A 3-3 TR0A 7-7 TR0A 8-8
>>> but:
>>> TR0A 0-15
>>> and all connections from all of the flexnet network are route
>>> directly to FBB, DXC, FPAC...
>>>
>>> For example - look at SR9ZAA Xnet node. Here is 5 services with
>>> 5 SSIDs but only one callsign in network in flexnet destinations
>>> table. From IGATE try to connect to SR9ZAA-8 (FBB) - you get it!
>>> Same for Tnos (-10), DXCluster (-12), WWConvers (-14)...
>>>
>>> This is very important pThis is very important possibility in Xnet! Why
>>> don't use it
>>> to save flexnet network??
>>>
>>> 73! Jarek SP9SPW
>>> ---
>>>
>>>
>>
>>
>>
>>--
>>'73 de IZ1FRP Matteo
>>
>>p-mail BCM:
>>IZ1FRP@IR1BOX.ILIG.ITA.EU
>>
>>e-mail
>>iz1frp@yahoo.it
>>
>>Message sent with Outlock Express + Open BCM
>>
>>
>>Ciao Matteo e a tutti,
>>questa mattina ho cercato di ottimizzare i settaggi di XNET tenendo
> in debito conto quanto riportato nei msgs...
> 73,
> Gus i0ojj
>
>
Read previous mail | Read next mail
| |
