| |
VK2AWZ > WINPAC 29.05.09 07:24l 36 Lines 1388 Bytes #999 (0) @ WW
BID : 430217VK2AWZ
Read: GUEST
Subj: Long standing problem
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<UA6ADV<CX2SA<VK2DOT<VK2TV
Sent: 090529/0510Z @:VK2TV.#MNC.NSW.AUS.OC #:58580 [Kempsey, QF68JX] $:430217VK
From: VK2AWZ@VK2TV.#MNC.NSW.AUS.OC
To : WINPAC@WW
This is a resend Bob as my edit of last failed due to putting in the
full prompt
Bob I would sugest you get rid of AGWPE completely making sure it is
fully cleaned out. That must have been a left over from RF Packet
use?. My computers all boot without AGWPE! That could be the cause of
your problem??!!
Hopefully this bull will be complete as on 2 previous sends?
Because I included Rays full prompt and chevron in my messages. his
bbs quitted on seeing it. Hope my brackets etc will confuse Rays BBS
and not quit? One learns something every day and I wonder if Bob ur
system puts in a chevron that kills the full message???
By the way Ray does not use an ordinary chevron it is (BBS>)
ie
no space to the chevron from BBS The full prompt is ('VK2TV BBS>')
it does not onclude my brackets()' etc, set to trick the BBS into
reading all this bull?
You can see the full prompt of VK2TV Bob, by manually logging
on to Rays BBS by
hitting.
c 220.233.211.6300
You will then arrive at his BBS without a disconnect. This allows you
to use his BBS for info etc, like hitting JK will tell you all who
have logged on in the last few hours. Or even manually downloading a
PNL or Bulls.
73 - de Dave, VK2AWZ @ VK2TV
Message timed: 15:07 on 2009-May-29
Message sent using WinPack-Telnet V6.80
Read previous mail | Read next mail
| |
