OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
VK2TV  > WINPAC   28.05.09 07:44l 61 Lines 1830 Bytes #999 (0) @ WW
BID : 7A0312VK2TV
Read: GUEST
Subj: Re: Longstanding problem
Path: IZ3LSV<IQ3GO<IR2UBX<IW2OHX<OE6XPE<UA6ADV<CX2SA<VK2DOT<VK2TV
Sent: 090528/0535Z @:VK2TV.#MNC.NSW.AUS.OC #:58489 [Kempsey, QF68JX] $:7A0312VK
From: VK2TV@VK2TV.#MNC.NSW.AUS.OC
To  : WINPAC@WW


M0PZT wrote:-
> From        : M0PZT
> To          : WINPAC@WW      
> Type/status : B$
> Date/time   : 27-May 22:15
> BID (MID)   : 897_M0PZT
> Message #   : 320585
> Title       : Re: Longstanding problem
> 
> Path: !F6BVP!F1MVP!F3KT!F4BWT!SR1BSZ!SP7MGD!ON0BEL!SV1CMG!CX2SA!KD4GCA!GB7YKS!
>       !GB7SYP!GB7PZT!GB7MAX!GB7ESX!M0PZT!
> 
> VK6BE wrote:
>  
>> Yep Ray. Problem still there. This is what I received in that 
>> message:
> 
> The next line of that message had a lone > chevron character... I'm sure 
> this occurs more often than in just VK2TV's bulletins but that's worth a 
> look.
> 
> Also, Bob, you say that you've been using a transplanted packet.ini and 
> that it's been working for years... As you don't think it'll be worth 
> showing us your entire INI file (in an attempt to weed out any daft 
> errors), please post the entire contents of the BBS Prompt setting.
> 
> Saying "it used to work" isn't really helpful ;)  It's like that old 
> story about a woman phoning up her computer support line and saying that 
> her PC won't work, the tech guy goes through all the reboot procedures, 
> gets her to un-plug her modem etc and only at the end does the woman say 
> that there's been a power-cut.
> 
> Points of action:
> 
> 1) Show us  the text for your BBS Prompt in WinPack
> 
> 2) Show us the actual BBS prompt for VK2TV BBS (I couldn't reach it, sadly)

Hi Charlie,

I logged onto my bbs as Bob and this is the prompt I send ...


Logon Ok. Type NP to change password.

[FBB-7.04r-AB1FHMRX$]
Hello Bob
(1) VK2TV BBS>
b
You have been connected 12s - Computer-time :  0s
Bye, Bob, and welcome back.

As for getting to my system, you should be able to Netrom connect to KEMPC
and then use the BB command from the node prompt.

Cheers ... Ray vk2tv


Read previous mail | Read next mail


 25.09.2024 17:25:02lGo back Go up