| |
ZL1ABS > WINPAC 25.10.08 20:08l 104 Lines 2627 Bytes #999 (0) @ WW
BID : 582215ZL1ABS
Read: GUEST
Subj: Re: Blank.Zip 7 + etc.
Path: IZ3LSV<IK2XDE<DB0RES<DK0WUE<7M3TJZ<ZL2BAU<ZL1AB
Sent: 081025/1858Z @:ZL1AB.#06.NZL.OC #:20321 [AUCKLAND] FBB7.00i $:582215ZL1AB
From: ZL1ABS@ZL1AB.#06.NZL.OC
To : WINPAC@WW
Hi Ian,
Putting the templates in the Templates folder is the first step to sucess
with HTML.
Copied from the 1999 Readme file for CNV2HTML.EXE :-
INSTALLATION
------------
To Install this program, go into the \WINPACK subdirectory, and create
a directory called TEMPLATE.
Copy the supplied sample templates into this directory.
The supplied templates are called BLANK01.HTM BLANK15.HTM BLANK30.HTM
BLANK45.HTM etc
Copy the program called CNV2HTML.EXE into the subdirectory called
\WINPACK\SERVERS\SEND\
(and the ini file too!)
You can now send HTML messages anytime you wish.
If you want an outgoing message or bulletin to be converted into HTML
just end the subject with ^.htm and the message will be converted when
it is transmitted.
My ini file has the following callsigns & TO fields set to be converted to
HTML by CNV2HTML. This file is alsoi located in the Winpack/servers/send
folder. When it it listed I don't need to add ^.HTML to the end of the
subject line.
[SETUP]
;
CONVERT=YES
;
; The CONVERT flag, if this is set to YES, convert anything to HTML
; if the "to" field matches any of the entries below.
;
; If CONVERT=NO then do the opposite, ONLY convert messages that
; don't match the "to" field shown below
;
TRIGGER=YES
;
; The TRIGGER flag, if this is set to YES, show a ^.htm in the subject
; of the message, if set to NO, don't show ^.htm
;was NO
SYSTEM=YES
;
; System message, if SYSTEM=YES send a system message to WinPack
; Giving details of the template used.
;
COPY=YES
;
; The copy flag, if COPY=YES send a full HTML copy of the converted
; message back to WinPack.
;
ASCII=NO
;
; The ASCII flag, if ASCII=YES send a plain text copy of any bulletin
; as well as a HTML version.
;
NEWLINE=NO
;
; The NEWLINE flag, if NEWLINE=YES add a <BR> to each line.
;
PARAGRAPH=YES
;
; The PARAGRAPH flag, if PARAGRAPH=YES add a <P> at each paragraph.
;
; Optionally you can add a list of callsigns here, Cnv2html can then
; be configured to always convert mail or bulls to the callsign or
; topic below if CONVERT=YES
;
; If CONVERT=NO then messages are converted if they don't match any
; of the callsigns below;
;
; Convert messages to the following
[G4FJQ]
[G4IDE]
[G0OEK]
[G7VJA]
[G0MFW]
[G0TEZ]
[ZS2ND]
[ZL4CW]
[WINPP]
[WINPPI]
;
The above apply to the 1999 version of CNV2HTML.EXE, there are two 1998
versions of CNV2HTML.EXE also available. They do work but need to have
:HTM in the subject line rather than ^.HTM
I can send you the 1999 version, if you don't have it.
73 - Michael, ZL1ABS @ ZL1AB
Message timed: 06:43 on 2008-Oct-26
Read previous mail | Read next mail
| |
