| |
VK7AX > UIVIEW 30.12.07 23:22l 332 Lines 9706 Bytes #999 (0) @ VKNET
BID : VK7AX-2812UU
Read: GUEST
Subj: [ui-view] Digest Number 4362
Path: IZ3LSV<IW2OAZ<IK2XDE<ON4HU<F4BWT<ON0BEL<SV1CMG<VK3AYM<VK4TRS<VK7NW
Sent: 071229/0119Z @:VK7NW.#ULV.TAS.AUS.OC #:33877 [NWTARIG] FBB7.00g $:VK7AX-2
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : UIVIEW@VKNET
There are 9 messages in this issue.
Topics in this digest:
1. Re: Precision Mapping / PMap Server
From: n9wys
2a. Need Illinois Map and Server Info
From: Jeffrey
2b. Re: Need Illinois Map and Server Info
From: Ron Tonneson
3a. Apple Computer Line/UiView
From: John
3b. Re: Apple Computer Line/UiView
From: Keith VE7GDH
4a. Re: UI-Weather Question
From: Tim Smith
4b. Re: UI-Weather Question
From: Andy Pritchard
5. Comms Setup
From: kgb_winradio
6. UIView for Linux (Ubuntu 7.10)
From: F4CXF
Messages
________________________________________________________________________
1. Re: Precision Mapping / PMap Server
Posted by: "n9wys" n9wys@ameritech.net n9wys
Date: Wed Dec 26, 2007 9:09 am ((PST))
Hi, Michael
In answer to your questions,
1) Yes
2) Yes
3) This situation only recently surfaced. The installation had been working
well for months until the problem occurred.
4) The installation on the laptop was done well after the desktop
installation at home, and new registration numbers were secured for the
laptop installation.
I may take your suggestion and uninstall and reinstall everything, but if
possible I'd like to find a solution to this by other means. I've been
running UI-View for years, so I am familiar with its intricacies. It's
almost as if the program can't find the registration number after it is
installed. If I was running Vista, I'd understand - but I have XP...
Thanks for the suggestions.
Mark - N9WYS
-----Original Message-----
Re: Precision Mapping / PMap Server
Posted by: "Michael Hemel" kb7wuk@pcez.com kb7wuk
Date: Tue Dec 25, 2007 8:45 pm ((PST))
If you are using the same registration number for both the home computer
and your laptop, it may be that one of the two programs is not accepting
the home computers registration number on the laptop. I do not begin to
understand how the registration number is arrived at by Chicago Mapping
/ Undertow; but I do know they seem to be machine specific.
Do you have separate registration numbers for each computer?
Do you have a separate registration number for Pmap 6.0 and for
PmapServer6 for each computer?
If you do have the correct registration numbers, it may be your
installation has not gone correctly. I would uninstall the programs and
then reinstall everything, being certain you follow precisely the order
of installation in the directions. The order and the requirement for
rebooting between individual installs must be done correctly. There is
not room for freelancing the install with this combination of software.
It is not plug and play, it requires user awareness to complete
successfully.
Mike KB7WUK
Portland OR USA
************************************
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
2a. Need Illinois Map and Server Info
Posted by: "Jeffrey" n9mxtham@yahoo.com n9mxtham
Date: Wed Dec 26, 2007 10:02 am ((PST))
Hello,
Just fianlly reinstalled UI-VIEW32 here but lost my Illinois map and
also the info on what server I can use for monitoring only local
Illinois traffic. I live in Lake In The Hills, IL and need a map of
the area here and that server info.
Please if you can help me out I would really appreciate it.
Jeffrey
Messages in this topic (2)
________________________________________________________________________
2b. Re: Need Illinois Map and Server Info
Posted by: "Ron Tonneson" ron.tonneson@gmail.com k0qvf
Date: Wed Dec 26, 2007 10:24 am ((PST))
Jeffrey,
Just use any of the 14580 filtered ports, I use central or indiana or midwest. Then in your Extra log-in text field put
in a filter to get the stations from the area that you want.
Ron - K0QVF
Jeffrey wrote:
> > Hello,
> > Just fianlly reinstalled UI-VIEW32 here but lost my Illinois map and
> > also the info on what server I can use for monitoring only local
> > Illinois traffic. I live in Lake In The Hills, IL and need a map of
> > the area here and that server info.
> >
> > Please if you can help me out I would really appreciate it.
> >
> > Jeffrey
Messages in this topic (2)
________________________________________________________________________
________________________________________________________________________
3a. Apple Computer Line/UiView
Posted by: "John" n0meq@arrl.net n0meq1
Date: Wed Dec 26, 2007 10:30 am ((PST))
Will UiView run on the apple line of computers??
John
N0MEQ
Messages in this topic (2)
________________________________________________________________________
3b. Re: Apple Computer Line/UiView
Posted by: "Keith VE7GDH" ve7gdh@yahoo.com ve7gdh
Date: Wed Dec 26, 2007 6:25 pm ((PST))
John N0MEQ wrote...
> > Will UiView run on the apple line of computers??
UI-View32 is a 32 bit Windows based program. If you can run Windows
programs on the Apple...
I understand that Apple's Leopard operating system is a GUI running on
Linux (or was it Unix?). I vaguely remember someone saying they could
run UI-View in WINE. Could someone confirm that for John?
73 es cul - Keith VE7GDH
--
Messages in this topic (2)
________________________________________________________________________
________________________________________________________________________
4a. Re: UI-Weather Question
Posted by: "Tim Smith" tsmith_groups@mattapoisett.org rt_smith
Date: Wed Dec 26, 2007 4:01 pm ((PST))
>> > > Hi Tim
>> > >
>> > > It requires all the data before it creates the wx.txt file
>> > >
> >
Andy:
That did it! Everything seems to be working well. I modified the
template file and built a temporary page until I get my sensors
properly mounted. One strange thing I am seeing is a wind gust
reading despite little or no movement of the wind sensor. Is this a
value collected by the weather station or is it interpolated by
UI-Weather?
Thanks again for your help!
http://mattapoisett.org/weather/wx.htm
73,
Tim, N1TI
Messages in this topic (15)
________________________________________________________________________
4b. Re: UI-Weather Question
Posted by: "Andy Pritchard" apritch@blueyonder.co.uk bozboing
Date: Wed Dec 26, 2007 4:07 pm ((PST))
--------------------------------------------------
From: "Tim Smith" <tsmith_groups@mattapoisett.org>
Sent: Thursday, December 27, 2007 12:01 AM
To: <ui-view@yahoogroups.com>
Subject: [ui-view] Re: UI-Weather Question
> >
>>> >> > Hi Tim
>>> >> >
>>> >> > It requires all the data before it creates the wx.txt file
>>> >> >
>> >>
> >
> > Andy:
> >
> > That did it! Everything seems to be working well. I modified the
> > template file and built a temporary page until I get my sensors
> > properly mounted. One strange thing I am seeing is a wind gust
> > reading despite little or no movement of the wind sensor. Is this a
> > value collected by the weather station or is it interpolated by
> > UI-Weather?
> >
> > Thanks again for your help!
> >
> > http://mattapoisett.org/weather/wx.htm
> >
> > 73,
> >
> > Tim, N1TI
> >
> >
It's indoor humidity when used with WS2300
Note: The wind gust is calculated for the wx.txt file
BTW: Nice web page
Andy, M0CYP - Telford
http://www.apritch.myby.co.uk/uiview.htm
http://www.apritch.myby.co.uk/radioprop.htm
Messages in this topic (15)
________________________________________________________________________
________________________________________________________________________
5. Comms Setup
Posted by: "kgb_winradio" kai.brandt@hjemme.no kgb_winradio
Date: Wed Dec 26, 2007 5:17 pm ((PST))
I know i can change to different TNC types by adding/changing the
different CMD files in the UI-View folder...
But if i select "host mode KISS" and enter the setup i get five
different systems:
TNC2
PK
D700
Kan
TF
Is it possible to add a extra button with D710 ?
If so where to i change this?
In the uiview32.ini i can find some TNC settings for KISS mode but
this is based on the button i press.
Anyhow changing the default values from D700 from ^C^MAI 1^MTC 1^MTNC
2^MTC 0^M^M^M^M to ^C^MTC 1^MTN 2,0^M is going to set the TM-D710 in
TNC mode without setting the radio in TNC mode first.
Kai Gunter
LA3QMA
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
6. UIView for Linux (Ubuntu 7.10)
Posted by: "F4CXF" f4cxf@neuf.fr f4cxf
Date: Thu Dec 27, 2007 4:10 am ((PST))
Hi all !!! hope u had a nice Christmas...
Will someone try to compil an UiVeiw for linux (Gnome debian Ubuntu) in
2008 ????
73
Thierry de f4cxf
---Moderator's comment:---
The source code for UI-View was destroyed, according to
the wish of the author G4IDE before he died in 2004. So it will probably not be possible (and it would be against G4IDE's wish) to port it to another operating system.
---end of comment---
Messages in this topic (1)
________________________________________________________________________
________________________________________________________________________
Please see <http://www.apritch.myby.co.uk/uiv32.htm> for UI-View registration information.
Precision Mapping version 8 works with UI-View32; the necessary additional PMapServer7 is available for download at <http://www.ui-view.org>.
At <http://wa8lmf.net/aprs/UIview_Notes.htm>, you will find useful hints and info for your UI-View setup and use.
------------------------------------------------------------------------
Read previous mail | Read next mail
| |
