OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
IW5BEM > TUTTI    17.09.17 17:25l 63 Lines 2425 Bytes #999 (0) @ ITA
BID : 9726_IK1NHL
Read: GUEST
Subj: X Luigi da Paese
Path: IZ3LSV<IR1UAW<IK1NHL
Sent: 170917/1818Z @:IK1NHL.ILIG.ITA.EU #:9726 [Ventimiglia JN33UU NHLNETWORK]
From: IW5BEM@IK1NHL.ILIG.ITA.EU
To  : TUTTI@ITA

Luigi se hai problemi di rs232 guarda il PORT.SYS in C:\fbb\system.....


#Com Interface Address (device)   Baud
#1    1         3F8                19200
#2    1         2F8                19200
#3    1         3E8                19200
2     5         2F8               115200
#1     5         3F8               115200
#
# TNC     : Number on TNC in use.  Use 0 for file-forward !
# NbCh    : Number of channels I want to use in the TNC.
#           Maximum available channels depend on firmware.
# Com     : Number of the COM-port. Com1, Com2 etc.
# MultCh  : Number of channel if port-multiplexer is used, otherwise 1.
#           In DRSI use values from 0 to 7, by KAM use 1/VHF and 2/HF.
#           With BPQ first TNC must have MultCh 0, the next 1, etc.
#           When using kernel AF_AX25 socket in Linux, MultCh is the
#           interface name (eg: ax0)
# Paclen  : PACLEN on this TNC.
# Maxframe: The maximum nb of frames the TNC will send at a time.
# NbFwd   : Number of channels for OUTGOING forward at same time.
# MxBloc  : Size of forward-block in kb.
# M/P-Fwd : Minute of the hour for start of forward, and period
#           (how many minutes between each forward-start).
# Port mode, one of these:
#           B : BBS-mode.
#           G : "Guest"-mode.
#           U : Normal-mode.
# Type host-mode, one of these:
#           D : WA8DED
#           K : KAM hostmode.  Must use ESSKAM driver.
#           P : PK-232
#           Q : BPQ v 4.x
#           T : Ethernet/TCP-IP
#           X : AX25 domain socket (for Linux)
# Addition: One or more of these letters can be used too:
#           L : Send unproto beacon after each arriving mail.
#           M : Telephone-modem.
#           Y : Yapp allowed on this QRG.
#           W : Gateway allowed TO this QRG.
#           R : Modem port allowed in Read-only mode.
# Freq.   : Text to describe this port (max 9 characters, no space)
#
# Same number of lines as TNCs:
#
#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq
#
#1    3    1   1      250   4     1     5      05/05   GDW   ItaNet
#2    5    2   1      250   7     1     5      20/60   GDLYW UHF
#3    5    3   1      250   5     1     5      30/60   GDLYW VHF 
#4    12   4   1      250   7     6     20     10/10   GDLYW FlexNet
1     20   2   1      250   7    20     90     00/10   GDLYW FlexNet
#
#



Controlla........  Toi


Read previous mail | Read next mail


 22.12.2024 15:48:08lGo back Go up