| |
G0FTD > TNC 10.03.08 09:00l 30 Lines 823 Bytes #999 (0) @ WW
BID : 000599069PZT
Read: GUEST
Subj: Re: tiny2
Path: IZ3LSV<IW2OHX<OE6XPE<DB0RES<F5GOV<F4BWT<F1ZNR<ON0AR<ZL2BAU<GB7PZT
Sent: 080310/0624Z @:GB7PZT.#24.GBR.EU [Kidderminster] #:59900 XSERV410h
Date: Mon, 10 Mar 2008 06:24:32 +0000
From: g0ftd@gb7pzt.#24.gbr.eu (Andy)
To: tnc@ww
Subject: Re: tiny2
G7VJA wrote:-
> i am using winpack 6.80
> the tnc will not respond to any commands,ie b l with or without the /
> i have tried every letter in the alphabet it just puts it on the screen
Now your talking about two things.
The title of your bulletin refers to the Tiny 2 tnc and now you've
mentioned the Winpack PMS.
The tnc's own PMS is definatly B for bye etc.
The Winpack PMS as you correctly say uses the "/" preceding the
commands. If it's the Winpack *software* PMS not responding then
you might have the Winpack PMS turned off.
In which case you go to OPTIONS in Winpack and the ENABLE REMOTE option
to be selected. That allows Winpack's built in PMS to work.
Does that help ?
- Andy -
G0FTD @ GB7PZT
Read previous mail | Read next mail
| |
