OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
KD5NJR > TECH     15.05.16 01:02l 43 Lines 2080 Bytes #999 (0) @ WW
BID : M7Y3BJJWHG1K
Read: GUEST
Subj: Re:BRLESC I
Path: IZ3LSV<IW8PGT<CX2SA<N0KFQ<AE5ME
Sent: 160514/2345Z 37410@AE5ME.#NEOK.OK.USA.NOAM BPQ1.4.64

That's a new computer (BRLESC) to me.
I wonder if it was built in part after the IAS (Princeton) design developed by vonNeumann or if followed a different path.
Thanks
Scott

----- Message from kf5jrv@kb0wsa.mo.usa.na sent 2016/05/14 11:16 -----

Message ID: 2896_KF5JRV
Date: 2016/05/14 11:16
From: kf5jrv@kb0wsa.mo.usa.na
To: tech@ww 
Source: AE5ME
Subject: BRLESC I

R:160514/1116Z 37402@AE5ME.#NEOK.OK.USA.NOAM BPQ1.4.64
R:160514/1116Z 2896@KF5JRV.#NWAR.AR.USA.NA BPQK1.4.65

The BRLESC I (Ballistic Research Laboratories Electronic Scientific Computer) 
 was a first-generation electronic computer built by the United States Army's 
 Ballistic Research Laboratory (BRL) at Aberdeen Proving Ground with 
 assistance from the National Bureau of Standards (now the National Institute 
 of Standards and Technology), and was designed to take over the computational 
 workload of EDVAC and ORDVAC, which themselves were successors of ENIAC. It 
 began operation in 1962.

BRLESC was designed primarily for scientific and military tasks requiring high 
precision and high computational speed, such as ballistics problems, army 
logistical problems, and weapons systems evaluations. It contained 1727 vacuum 
tubes and 853 transistors and had a memory of 4096 72-bit words. BRLESC 
employed punched cards, magnetic tape, and a magnetic drum as input-output 
devices, which could be operated simultaneously.

It was capable of five million (bitwise) operations per second. A fixed point 
addition took 5 microseconds, a floating-point addition took 5 to 10 
microseconds, a multiplication (fixed or floating-point) took 25 microseconds, 
and a division (fixed or floating-point) took 65 microseconds. (These times 
are including the memory access time, which was 4-5 microseconds.)

BRLESC and its predecessor, ORDVAC, used their own unique notation for 
hexadecimal numbers. Instead of the sequence A B C D E F universally used 
today, the digits ten to fifteen were represented by the letters K S N J F L, 
corresponding to the teletypewriter characters on five-track paper tape.


Read previous mail | Read next mail


 12.11.2024 21:13:06lGo back Go up