VK2AAB > TECH 19.09.08 00:16l 24 Lines 970 Bytes #999 (0) @ WW
BID : 61298_VK2AAB
Read: GUEST
Subj: Repair of Remote Controls
Path: IZ3LSV<IQ3GO<SR1BSZ<WA7V<VK7AX<VK2TGB<VK2IO<VK2AAB
Sent: 080918/2145Z @:VK2AAB.#SYD.NSW.AUS.OC #:61298 [SYDNEY] FBB7.00i
From: VK2AAB@VK2AAB.#SYD.NSW.AUS.OC
To : TECH@WW
Some time ago I sent a bulletin about my attempts at repairing a TV remote
control.
The problem was that the buttons lost their conductivity so that when pressed
onto the PCB they did not function.
I tried gluing small pieces of aluminium foil onto the buttons but no glue
seemed to do the job.
However while looking through a Jaycar catalogue I spotted conductive
varnish. The part number is NS3030. It appears to be a German product.
It has an original barcode of 40240280500409. This might help to identify in
other countries. It is a small glass tube.
It is reccomended for repairing PCBs etc so I gave it a go.
It has particles of silver particles in suspension and after shaking you dab
it onto the buttons and when it dries it is conductive.
I found that it needed several coats to get a well covered button.
I have had it in use for a couple of days now and so far so good.
73 Barry VK2AAB
Read previous mail | Read next mail
|