| |
G8MNY > TECH 16.12.23 11:20l 102 Lines 3370 Bytes #999 (0) @ WW
BID : 62581_GB7CIP
Read: GUEST
Subj: 3 Rs Physics Problem (Answers) (Updated Dec 19)
Path: IZ3LSV<ED1ZAC<GB7CIP
Sent: 231216/1019Z @:GB7CIP.#32.GBR.EURO #:62581 [Caterham Surrey GBR]
From: G8MNY@GB7CIP.#32.GBR.EURO
To : TECH@WW
(8 Bit ASCII graphics use code page 437 or 850, Terminal Font)
Helmut DK2ZA @ DB0FOR.#BAY.DEU.EU posed this question..
Here is one problem from a German physics contest for 16 year olds:
You have three resistors R1 = 10 Ohm, R2 = 20 Ohm & R3 = 30 Ohm.
Each resistor can absorb at most 5 Watts. You have only one source of
electrical power, the voltage of which can be adjusted to any necessary value.
How do the resistors have to be connected so that when voltage is applied the
total absorbed power is a maximum? How many watts will that be?
Have fun & vy 73 de Helmut, DK2ZA
------------------------------------------------------------------
My answer..
There are 8 ways to configure the 3 Rs.. (2^3)
1/ All in series..
As currents all the same, highest R dissapates 5W.
Ä10Ä20Ä30Ä P30=5W, V30=û5*30 = 12.25V which is 50% of all R.
So across all Rs, Voltage = 2x12.25 = 25.5V &
Total Power = 5+5 = 10W
2/ All in parallel..
ÄÄÂÄÄÂÄÄ¿ As the voltage are all the same, lowest R has 5W.
10 20 30 P10=5W, V10=û5x10 = 7.07V, as other Rs are mutiples
ÄÄÁÄÄÁÄÄÙ their power is proportionally less.
Total Power = 5+(5/2)+(5/3) = 9.166W
3/ Parallel + Series A)..
ÄÄÂÄÄ¿ Here the 2 series Rs = the parallel R, so that is 5W
10 ³ P30=5W. V=12.25V as in 1/.
³ 30 Total Power = 5+5 = 10W
20 ³
ÄÄÁÄÄÙ
4/ Parallel + Series B)..
ÄÄÂÄÄ¿ Here the 2 series Rs = 4x the parallel R, so that is 5W
20 ³ P10=5W. V=7.07 as in 2/. Series Rs have 1/5 the power, so
³ 10 Total Power = 5+(5/5) = 6.00W
30 ³
ÄÄÁÄÄÙ
5/ Parallel + Series C)..
ÄÄÂÄÄ¿ Here the 2 series Rs = 2x the parallel R, so that has 5W
30 ³ P20=5W. V=û20*5 = 10V. Series Rs have 1/2 the power, so
³ 20 Total Power = 5+2.5 = 7.5W
10 ³
ÄÄÁÄÄÙ
6/ Series + Parallel a)..
It is not obvious which R will have the max power!
Assume 10R has 5W, then I = û(5/10) = 0.707A,
ÄÄ10ÄÂÄÄ¿ I in 20R = 0.707*(30/50) = 0.424A,
20 30 So P20 =0.424*0.424*20= 3.6W,
ÄÄÄÄÄÁÄÄÙ I in 30R = 0.707*(20/50) = 0.283A,
So P30 =0.283*0.283*30= 2.4W,
Total Power = 5+3.6+2.4 = 11W
7/ Series + Parallel b)..
Assume 20R has 5W, then I =û(5/20)= 0.5A
ÄÄ20ÄÂÄÄ¿ I in 10R = 0.5*(30/40) = 0.375A,
30 10 So P20 =0.375*0.375*10= 1.4W,
ÄÄÄÄÄÁÄÄÙ I in 30R = 0.5*(10/40) = 0.125A,
So P30 =0.125*0.125*30= 0.47W,
Total Power = 5+1.4+0.47 = 6.87W
8/ Series + Parallel c)..
Assume 30R has 5W, then I=û(5/30)= 0.408A
ÄÄ30ÄÂÄÄ¿ I in 10R = 0.408*(20/30) = 0.272A,
10 20 So P10 =0.272*0.272*10= 0.74W
ÄÄÄÄÄÁÄÄÙ I in 20R = 0.408*(10/30) = 0.136A,
So P20 =0.136*0.136*20= 0.37W
Total Power = 5+0.74+0.37 = 6.11W
So the answer is configuration 6/ to give 11 Watts.
-------------------------------------------------------------------------------
Here is another 3 Rs Question that you can do in yor head.
What does this measure?
ÄÄÂÄÄÄÂÄÄÄ¿
25 50 75
ÄÄÁÄÄÄÁÄÄÄÙ
A simple way to solve it, is to look for a common mutiple. I saw "150".
e.g. 75 is 2x 150s in parallel, 50 is 3 in parallel, & 25 is 6 in parallel,
making a total of 11 150s in parallel = 150/11 = 13.636 QED.
Why don't U send an interesting bul?
73 de John G8MNY @ GB7CIP
Read previous mail | Read next mail
| |
