| |
IZ1FRP > SYSOP 21.01.08 13:23l 100 Lines 2139 Bytes #999 (0) @ ITA
BID : K1IIR1BOX6N2
Read: I3CRIS GUEST
Subj: xnet ssid
Path: IZ3LSV<IW2OHX<IR1BOX
Sent: 080120/1917z @:IR1BOX.ILIG.ITA.EU [OpenBCM] OBcm1.06
From: IZ1FRP @ IR1BOX.ILIG.ITA.EU (Matteo)
To: SYSOP @ ITA
X-Info: Received by NNTP-gateway
Ciao a tutti!
stavo rileggendo questo bollettino "antico" che il buon Marco ha inoltrato
di nuovo!
E' importante leggere bene i manuali o chiedere info prima di attivare
un sistema che si interfaccia sulla rete flexnet!!!!!
Hi to all,
I want to forward again this important bulletin
where Jarek explain SSID correct settings.
Pay attention how you set your XNET node !!
Read manual first! and if you don't understand...ASK!
Following bulletin was sent by Jarek on 12th Oct 2006,
but at the moment the situation isn't changed.
Marco
iw2ohx
---------
From: SP9SPW@SR9ZAA.#KRA.POL.EU
To : XNET@WW
Hi Didier and All
Hi Jarek...
The node use only ONE CallSign SID TR0A-7
TR0A-1 is the FBB BBS
TR0A-3 is the DxCluster
TR0A-8 is the FPAC node
It's ONE CALLSIGN FULLY SID ???
Where is your problem Jarek ?
vy73 de Didier, TU5EX
Look at flexnet destinations - you will see 4 callsigns, not one.
Why? Because in flexnet destinations each CALL with SSID is
different callsign.
OK, try to declare local links as Proxy links (not FlexNet) and
'main' node (Xnet) as TR0A 0-15 (ro f pa ssid 15).
Now in flexnet destinations you dont see :
TR0A 1-1 TR0A 3-3 TR0A 7-7 TR0A 8-8
but:
TR0A 0-15
and all connections from all of the flexnet network are route
directly to FBB, DXC, FPAC...
For example - look at SR9ZAA Xnet node. Here is 5 services with
5 SSIDs but only one callsign in network in flexnet destinations
table. From IGATE try to connect to SR9ZAA-8 (FBB) - you get it!
Same for Tnos (-10), DXCluster (-12), WWConvers (-14)...
This is very important pThis is very important possibility in Xnet! Why
don't use it
to save flexnet network??
73! Jarek SP9SPW
----------
--
---
OpenBCM Gateway NNTP><AX25
http://iw2ohx.ampr.org:8060
---
Marco Di Martino
Bollate (MI)
www.marcodimartino.it
www.kwos.org
-
Amateur Radio: IW2OHX
IW2OHX@IW2OHX.ILOM.ITA.EU
---
--
'73 de IZ1FRP Matteo
p-mail BCM:
IZ1FRP@IR1BOX.ILIG.ITA.EU
e-mail
iz1frp@yahoo.it
Message sent with Outlock Express + Open BCM
Read previous mail | Read next mail
| |
