| |
VK7AX > SSTV 23.10.08 02:01l 309 Lines 7682 Bytes #999 (0) @ WW
BID : VK7AX-2310SE
Read: GUEST
Subj: [MM-SSTV] Digest Number 1865
Path: IZ3LSV<IQ3GO<SR1BSZ<WA7V<VK7AX
Sent: 081023/0057Z @:VK7AX.#ULV.TAS.AUS.OC #:54506 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : SSTV@WW
There are 9 messages in this issue.
Topics in this digest:
1a. Re: Any soundcard updates
From: cesco12342000
1b. Re: Any soundcard updates
From: Bret Mills
1c. Re: Any soundcard updates
From: Ric Shanahan
1d. Re: Any soundcard updates
From: cesco12342000
1e. Re: Any soundcard updates
From: ve5kc
1f. Re: Any soundcard updates
From: cesco12342000
2a. Re: Mobile using a Laptop
From: MICHAEL BROWN
3a. Pueblo, CO
From: D. Mynatt
3b. Re: Pueblo, CO
From: B.P.
Messages
________________________________________________________________________
1a. Re: Any soundcard updates
Posted by: "cesco12342000" cesco1(AT)tiscali.ch cesco12342000
Date: Sun Oct 5, 2008 8:54 am ((PDT))
> > After the work I did with those puppies I am sort of ashamed I did not
> > think of this trick sooner.
That was your idea ... it was what i understood reading your post.
I did make a small instructions page :
http://hammap.smallcpu.org/mmsstv/
btw seems to work with MMTTY too.
73, Cesco
Messages in this topic (20)
________________________________________________________________________
1b. Re: Any soundcard updates
Posted by: "Bret Mills" bmills1(AT)ecso.com wx7y
Date: Sun Oct 5, 2008 9:49 am ((PDT))
Thanks to those who have been working on the Sound card issue, I have
installed the patch (loop.mmw) and the virtual sound card works quite well
BUT it wont automatically un-key the radio after the picture is finished
sending.
I have tried both CAT PTT and Serial PTT settings, If I go back to default
sound car -1 it un-keys just fine.
Thanks again for the work on MSSTV and I hope there is a work around.
73's
Bret Mills
WX7Y
Messages in this topic (20)
________________________________________________________________________
1c. Re: Any soundcard updates
Posted by: "Ric Shanahan" Ric_Shanahan(AT)yahoo.com ric_shanahan
Date: Sun Oct 5, 2008 10:35 am ((PDT))
Joanne, W6MKU (W 6 More Knowledgeable U)
After all your help over these many, many, (did I say many?) years it must
feel great to know you can still learn, no?
Ric, N1YLE
--- On Sun, 10/5/08, jdow <jdow(AT)earthlink.net> wrote:
From: jdow <jdow(AT)earthlink.net>
Subject: Re: [MM-SSTV] Re: Any soundcard updates
To: MM-SSTV(AT)yahoogroups.com
Date: Sunday, October 5, 2008, 3:27 AM
From: "cesco12342000" <cesco1(AT)tiscali. ch>
Sent: Saturday, 2008, October 04 08:46
>> >> mmw103.zip
>> >> The first is for audio.
> >
> > Reading EMMW.txt in mmw103.zip it should be quite simple to make a dll
> > interfacing mmsstv to any soundcard, and have the in/out separated.
> >
> > Should also be easy to interface mmsstv to the m0kgk-SDR software by re-
> > writing the loop.dll to suit mmsstv needs. wow, good thing !
After the work I did with those puppies I am sort of ashamed I did not
think of this trick sooner.
{o.o} Joanne, W6MKU, kicking herself for not seeing the obvious sooner.
Messages in this topic (20)
________________________________________________________________________
1d. Re: Any soundcard updates
Posted by: "cesco12342000" cesco1(AT)tiscali.ch cesco12342000
Date: Sun Oct 5, 2008 6:04 pm ((PDT))
Hi Bret,
> > BUT it wont automatically un-key the radio after the picture is finished
> > sending.
Same problem here ... tnx for the report.
I have corrected the bug and replaced the file. Can u check the new
version in the files section ?
Messages in this topic (20)
________________________________________________________________________
1e. Re: Any soundcard updates
Posted by: "ve5kc" mmhamsoft(AT)gmail.com ve5kc
Date: Sun Oct 5, 2008 9:51 pm ((PDT))
Hi Cesco,
Excellent work!
I tested Loop with MMSSTV on both WinXP and Vista and it works fine.
This is a great step forward and will be much appreciated by our
users. I am working on setting up the information and will make Loop
available on the MM Hamsoft website..
I also tried to see if loop would work with MMVARI. Unfortunately the
answer was no, at least on VISTA. You can select loop as the audio
device but that is as far as you can go as MMVARI locks up. I wonder
if anyone can come up with a way to make this work..
TNX...
73 . . Ken - VE5KC
Webmaster MM Hamsoft Website
http://mmhamsoft.amateur-radio.ca
Messages in this topic (20)
________________________________________________________________________
1f. Re: Any soundcard updates
Posted by: "cesco12342000" cesco1(AT)tiscali.ch cesco12342000
Date: Mon Oct 6, 2008 8:27 am ((PDT))
Hi Ken,
> > I also tried to see if loop would work with MMVARI.
Can you try the new version "extsc.mmw" with MMVARI ?
73, Cesco
Messages in this topic (20)
________________________________________________________________________
________________________________________________________________________
2a. Re: Mobile using a Laptop
Posted by: "MICHAEL BROWN" keysersoze2973(AT)yahoo.com keysersoze2973
Date: Sun Oct 5, 2008 12:34 pm ((PDT))
Hi there you can use a rigblater nomic for laptop ops that what i use and
have no problems to date the rigblaster can fit into your pocket many
times it gets lost under my seat.
9Z4GB Mike 73'S
--- On Sat, 10/4/08, ian11936 <ianbrowne16(AT)btinternet.com> wrote:
From: ian11936 <ianbrowne16(AT)btinternet.com>
Subject: [MM-SSTV] Mobile using a Laptop
To: MM-SSTV(AT)yahoogroups.com
Date: Saturday, October 4, 2008, 5:53 PM
I plan on going Portable/Static Mobile using a laptop, however my
Laptop only has USB Ports and no RS232 port for control. Has there been
a mod to MMSSTV to set up the output to a USB Port. Or has anyone used
a USB/RS232 Adaptor successfully?
Ian 2E0ZVG
Messages in this topic (5)
________________________________________________________________________
________________________________________________________________________
3a. Pueblo, CO
Posted by: "D. Mynatt" dave(AT)mynatt.biz davemynatt
Date: Sun Oct 5, 2008 10:33 pm ((PDT))
Any SSTV stations in Pueblo CO willing to help set one up for a science group?
Dave Mynatt
Program Director
========================
http://sciencecenter.no-ip.org
SID ID: S-0258
KA0SWT
APRS Tier II Server (AT) pueblo.aprs2.net:14501
LAT: 38'16.278" N
LON: -104'40.537" W
Alt: 1460m
DM78qd
[Non-text portions of this message have been removed]
Messages in this topic (2)
________________________________________________________________________
3b. Re: Pueblo, CO
Posted by: "B.P." usaf.primebeef(AT)yahoo.com usaf.primebeef
Date: Mon Oct 6, 2008 8:27 am ((PDT))
You might try to contact WB0LCC, he's in Pueblo and always on 14.230 running SSTV.
Bruce KD8DQ
--- On Mon, 10/6/08, D. Mynatt <dave(AT)mynatt.biz> wrote:
From: D. Mynatt <dave(AT)mynatt.biz>
Subject: [MM-SSTV] Pueblo, CO
To: MM-SSTV(AT)yahoogroups.com
Date: Monday, October 6, 2008, 12:50 AM
Any SSTV stations in Pueblo CO willing to help set one up for a science group?
Dave Mynatt
Program Director
============ ========= ===
http://sciencecente r.no-ip.org
SID ID: S-0258
KA0SWT
APRS Tier II Server (AT) pueblo.aprs2. net:14501
LAT: 38'16.278" N
LON: -104'40.537" W
Alt: 1460m
DM78qd
Messages in this topic (2)
--------------------------------------------------------
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN SLOW SCAN TELEVISION AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
