| |
VK7AX > SSTV 17.05.08 01:20l 64 Lines 1646 Bytes #999 (0) @ WW
BID : VK7AX-1705ST
Read: GUEST
Subj: [MM-SSTV] Digest Number 1794
Path: IZ3LSV<IV3SCP<SR1BSZ<WA7V<VK7AX
Sent: 080517/0015Z @:VK7AX.#ULV.TAS.AUS.OC #:45636 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : SSTV@WW
There is 1 message in this issue.
Topics in this digest:
1a. Re: How do i select Com Port 9???
From: ve3wej gmail
Message
________________________________________________________________________
1a. Re: How do i select Com Port 9???
Posted by: "ve3wej gmail" ve3wej@gmail.com ve3wej
Date: Tue May 13, 2008 12:23 pm ((PDT))
like i said!!!! good for you
VE3WEJ
Dave Garber
10-X # 23465
echolink # 52852
irlp node 2202
email ve3wej@rac.ca
----- Original Message -----
From: "wrigglytin" <wrigglytin@yahoo.co.uk>
To: <MM-SSTV@yahoogroups.com>
Sent: Monday, May 12, 2008 12:49 PM
Subject: [MM-SSTV] Re: How do i select Com Port 9???
> > --- In MM-SSTV@yahoogroups.com, "wrigglytin" <wrigglytin@...> wrote:
>> >>
>> >> It seems MMSSTV only lets me select ports up to 8, but my system
>> >> insists on using Com9 for keying the tx, any ideas anyone?
>> >>
>> >> I'm using an FT-817, with G4ZLP interface, using Com1 for Cat, Com9 i
>> >> gather is virtual port for audi/tx.
>> >>
>> >> MixW, HRD, Multipsk & assorted other progs all work fine??
>> >>
> >
> >
> > Replying to my own message...problem solved, just re-mapped ports
Messages in this topic (4)
------------------------------------------------------------------------
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO PROMOTE
FURTHER INTEREST IN SLOW SCAN TELEVISION & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
