| |
VK7AX > SSTV 13.05.08 23:58l 88 Lines 2404 Bytes #999 (0) @ WW
BID : VK7AX-1405SS
Read: GUEST
Subj: [MM-SSTV] Digest Number 1793
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<HS1LMV<CX2SA<VK4TRS<VK7AX
Sent: 080513/2244Z @:VK7AX.#ULV.TAS.AUS.OC #:45450 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : SSTV@WW
There are 2 messages in this issue.
Topics in this digest:
1a. Re: How do i select Com Port 9???
From: ve3wej gmail
1b. Re: How do i select Com Port 9???
From: wrigglytin
Messages
________________________________________________________________________
1a. Re: How do i select Com Port 9???
Posted by: "ve3wej gmail" ve3wej@gmail.com ve3wej
Date: Mon May 12, 2008 11:55 am ((PDT))
i went into the windows registry (only if you know how) and changed mine to
a free com port(com 3)
i think you can change properties in windows hardware manager ("system" in
the control panel)
VE3WEJ
Dave Garber
10-X # 23465
echolink # 52852
irlp node 2202
email ve3wej@rac.ca
----- Original Message -----
From: "wrigglytin" <wrigglytin@yahoo.co.uk>
To: <MM-SSTV@yahoogroups.com>
Sent: Sunday, May 11, 2008 5:53 PM
Subject: [MM-SSTV] How do i select Com Port 9???
> > It seems MMSSTV only lets me select ports up to 8, but my system
> > insists on using Com9 for keying the tx, any ideas anyone?
> >
> > I'm using an FT-817, with G4ZLP interface, using Com1 for Cat, Com9 i
> > gather is virtual port for audi/tx.
> >
> > MixW, HRD, Multipsk & assorted other progs all work fine??
Messages in this topic (3)
________________________________________________________________________
1b. Re: How do i select Com Port 9???
Posted by: "wrigglytin" wrigglytin@yahoo.co.uk wrigglytin
Date: Mon May 12, 2008 4:54 pm ((PDT))
--- In MM-SSTV@yahoogroups.com, "wrigglytin" <wrigglytin@...> wrote:
> >
> > It seems MMSSTV only lets me select ports up to 8, but my system
> > insists on using Com9 for keying the tx, any ideas anyone?
> >
> > I'm using an FT-817, with G4ZLP interface, using Com1 for Cat, Com9 i
> > gather is virtual port for audi/tx.
> >
> > MixW, HRD, Multipsk & assorted other progs all work fine??
> >
Replying to my own message...problem solved, just re-mapped ports
Messages in this topic (3)
------------------------------------------------------------------------
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO PROMOTE
FURTHER INTEREST IN SLOW SCAN TELEVISION & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
