| |
VK7AX > SSTV 12.05.08 05:58l 51 Lines 1586 Bytes #999 (0) @ WW
BID : VK7AX-1205SS
Read: GUEST
Subj: [MM-SSTV] Digest Number 1791
Path: IZ3LSV<IV3SCP<SR1BSZ<ON4HU<ON0BEL<VK4TRS<VK7AX
Sent: 080512/0447Z @:VK7AX.#ULV.TAS.AUS.OC #:45255 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : SSTV@WW
There is 1 message in this issue.
Topics in this digest:
1a. sound card help
From: Mark Krubsack
Message
________________________________________________________________________
1a. sound card help
Posted by: "Mark Krubsack" mkrubsack@yahoo.com mkrubsack
Date: Sat May 10, 2008 4:47 am ((PDT))
This is a common question I've seen here several times...
What you need to do is go into MMSSTV, choose Setup MMSSTV, and then click on the Misc tab.
You will see a Device ID field. You will have to change this. The default of -1 or 0 is the internal computer soundcard, and causes the program not to recognize the external soundcard.
You will have to change this value to "1" or other number. You will have to experiment, but most of the time the "1" will work, sometimes it might be a "2" or "3".
"1" works for my SignaLink USB device.
BTW, the same technique is required to get MMTTY to work within Hamscope. Hamscope uses the MMTTY engine for RTTY, and you will have to also change the device number in the MMTTY file also.
Mark Krubsack, K6MAK
mkrubsack@yahoo.com
Messages in this topic (3)
------------------------------------------------------------------------
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO PROMOTE
FURTHER INTEREST IN SLOW SCAN TELEVISION & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
