OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
G8MNY  > HDTV     11.07.09 10:01l 239 Lines 12925 Bytes #999 (0) @ WW
BID : 31471_GB7CIP
Read: GUEST
Subj: TV systems & displays
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<UA6ADV<GB7CIP
Sent: 090711/0744Z @:GB7CIP.#32.GBR.EU #:31471 [Caterham] $:31471_GB7CIP
From: G8MNY@GB7CIP.#32.GBR.EU
To  : HDTV@WW

By G8MNY                                     (Updated Jul 09)
Some time ago I went to another HDTV lecture held at a local ham club (Sutton
& Cheam), the previous one was 20 years ago an IEEE @ Kingswood BBC research
establishment.

FORMATS
In 20 years has not seen a much change really, it used to be 1250 line (1150
visible) @ 100Hz frame per second rate 16:9 format, to be sort of comparable
with 625 line PAL (575 visible lines) being 8x that data rate. But the new
versions (4 of them) made to be USA friendly, are worse. The best is only 1080
visible lines @ 25 F/S & the worst 720 lines at 25/50 F/S there are (P)
progressive update formats of both types to improve visible motion by keeping
interlaced frames (time) separate, this overcomes most of the smooth motion
problems but keep the high compression systems.

For TRUE "HDTV" large displays capable of full resolution are needed, as the
normal eye can only perceive 1 min of arc. So for a screen of 1080 visible
lines you need to see this as 18ø tall by the eye.

           _  - Â
   <o)- =  _    ³18ø Height = 1 Min of ARC resolution
              Ä Á

If your sight is worse than perfect then you well need to be even closer than
the distances below.

Note many screen are "HDTV Ready" this means they are only plug compatible &
may not be capable of displaying an improved picture definition at all! See the
Pixels per line it needs to be at least as good as the HDTV source is. 

SCREEN SIZE
Here are the MAXIMUM viewing distance to "just" see the detail of a pixel..

SYSTEM  \  DIAGONAL     9"  14"  21"  28"  30"  33"  37"  40"  42"  50" FACTOR
 380 Line  4:3 405 Old 48"  75" 112"                                     5.35
 480 Line  4:3 525 USA 60"  86"  90" 120"                                4.29
 575 Line  4:3 625     32"  50"  75" 100" 107" 118" 132" 143"            3.57
 575 Line 16:9 625     26"  41"  61"  82"  88"  97" 108" 117" 123" 146"  2.92
 720 Line 16:9                   47"  65"  70"  78"  86"  93"  98" 117"  2.33
1080 Line 16:9                   33"  43"  46"  51"  57"  62"  65"  77"  1.55

       4:3                  16:9
Ú Ä Ä - Ä Ä Ä Ä ¿
  \                 Ú Ä Ä Ä Ä Ä Ä Ä Ä ¿     Note what your eye appreciates
³   \           ³     \                     is not the picture width, but
      \             ³     \           ³     the total picture area! So 16:9
³   diagonal    ³         diagonal          gives big screen diagonals with
          \         ³           \     ³     smaller actual picture area!
³           \   ³                   \       Also if the central area is
              \     À Ä Ä Ä Ä Ä Ä Ä Ä Ù     smaller, you will feel cheated.
À - - - - - Ä Ä Ù

So to appreciate what HD offers, you really do need a big screen & sit close up
to it, otherwise you're wasting your time & money.

Example: If your upgrading from say a 21" 4:3 TV you view at 6ft, to a 16:9
HDTV at the same distance you will need a huge 50" screen!

The original HD trial CRT TVs of 20 years ago were a maximum of 30" & weighed
in at a heavy 185kg, & unless you had double door access on the ground floor,
you weren't getting one!

HD or not HD, many modern displays can't actually reproduce the definition,
even though they are marked/sold as "HD ready"! That just means they have a
compatible connector & software that can either degrade definition or zoom in
missing the edges, that is all! Whereas ones that are truely HD, can't display
normal TV as well as a normal TV due to poor conversion systems algorythem /
small picture area options.

SCREEN/TV TYPES
There are 5 types all with their problems...

1/ CRT. Heavy & bulky. A fluorescent phosphor determines the colour per
   screen dot, illuminate by 3 fast scanned electron guns via a shadow mask
   that removes 75% of the electron beam (& power) & generally half of the
   phosphor light is lost into the tube giving over all transfer efficiency
   less than 12%! Some tubes use blackened glass to help see the blacks better
   in strong room light, reducing the efficency still further. All CRTs produce
   some X-Ray emmision. The Phosphor dots & line structure often cause moire
   patters on a wello focused tube! Phospher screen & shadow mask can be
   dammaged by internal tube dirt if transported screen down.
   Dot size varies with brilliance ú * ù ß  & this show up the line structure.
   All bright dots have a ring halo from electron wavelength used. ( ù )
   Gamma Gun correction is transmitted for CRT characteristics so the maker
   does not have to bother with the correction curve.
   When new CRTs give very good bright picture (1000 Cd/M^2) with good
   definition, but age to give blurred highlights & sometimes burnt screen
   areas. Also uneven gun emmisions affect colour balance.
   Sharp focus often variable over screen.
   Lifetime good 20,000 hrs, if the QRO 16:9 LOPTY stage does not fail!
   Colours can change with age/magnets.
   Good viewing angle, but normally a curved screen!
   Quite high QRM @ multiples of line frequency & from SMPSU, as well as some
   changing video frequency radiation.

2/ LCD Panel. Has very high levels of back fluorescent lights needed all the 
   time, as only about 10% of light entering the panel can get through to the
   front. The light is polarised (60% loss) the LCD cell were (10% more is
   lost), then another polariser & then the colour filter (75% loss) /pixel.
   LCDs are well known for slow response (motion drag) due to slow cells some
   are faster nowadays, but not all!
   Imperfect polarisation nulling results in poor blacks, this is very viewing
   angle related, the good contrast ratio figures often quoted are only from 1
   viewing angle only!
   The gamma curve is often poor due to the non linear polarisation nulling
   process in the LCD cells, which effects the true colour rendition.
   Pixilated screens are always sharp! LCDs can't normally get "picture burn
   ins".
   Standard conversion to the screen format may produce poorer moving pictures
   than expected. Also picture delay resulting in lip sync problem on some
   sources. Brightness limited to about 500Cd/M^2 max.
   Susceptible to random pixel /addressing (stripe) failure. Tube failure & UV
   degradation of the polarisers also occur.
   QRM fairly high from large screen address wires radiating, & QRO lamp SMPS.

3/ PLASMA Panel. Like CRT, a fluorescent phosphor determines the colour,
   illuminate by a UV from a Mercury arc as in a fluorescent tube lamp but per
   pixel. Most of the light produced leaves the front of the screen, but
   the high power drivers are inefficient.
   Some artifacts can be visible if you scan your eyes fast as the pixels are
   not on continuously.
   Lifetime dependent on brilliance but around the life of the average CRT
   nowadays.
   Viewing angle very good, good real contrast figures.
   Pixilated screens are always sharp!
   Like CRTs it can easily get picture burn in if bright static picture is
   left on for hours. Displays have anti burn strategies to reduce the chance
   of this.
   Colours are VERY TRUE, as pulse width control is used vary each pixel's
   brillinace, there is no gamma correction needed, & brightness is much higher
   than CRTs or LCD display at about 1500 Cd/M^2.
   Screen is quite delicate, not thick glass like a CRT, as back of display
   touches the front, also must be kept vertical for transport because of this!
   Standard conversion to the screen format may produce poorer moving pictures
   than expected. Also picture delay resulting in lip sync problem on some
   sources.
   Susceptible to random addressing (stripe) failure.
   QRM high from power in screen address wires radiating & the QRO SMPSU.

4/ LCD Projection. These need very bright white light from expensive Xenon arc
   lamp lifetime up to 6000 hrs for under run lamps. (2000 on some projectors)
   N.B. these lamps can explode!
   The light is split into 3 colours with mirrors, feed the 3 polarisers, 3
   LCD tiles & a 2nd polariser per colour, before being recombined in a colour
   splitting prism (optical block) & then to the single projection lens.
   Incident light a real problem for black on all projection screen systems.
   The gamma curve is often poor due to the non linear polarisation nulling
   process in the LCD cells, which can effect true colour rendition.
   Standard conversion to the screen format may produce poorer moving pictures
   than expected. Also picture delay resulting in lip sync problem on some
   sources.
   Susceptible to random pixel / addressing (stripe) failure. Also due to heat
   & UV failure/damage of LCD tiles & polarising filters in the optical block.
   Due to optics focus etc. there will be some aberration/fuzziness.
   Dirt in air degrades optics difficult to maintain spotless!!
   Easy to get a large screen, with rear projection system or ceiling mount.
   Fan cooled, must be cooled off after use. QRM from lamp SMPS.

5/ DLP Projection. Rotating coloured wheel & reflected pixel tile system.
   These give very bright pictures, also using expensive Xenon arc lamps of
   limited lifetime. N.B. these lamps can explode!
   Main problem is the colour flicker due to the wheel, making reading text &
   moving pictures quite eye aching.
   Standard conversion to the screen format may produce poorer moving pictures
   than expected. Also picture delay resulting in lip sync problem on some
   sources.
   PC grade definition is VERY GOOD if the standards are set right & no
   converted done, may not be quite as good on HDTV as from PC.  
   Susceptible to random pixel /addressing (stripe) failure. Also due to heat
   & UV failure of mirror tile block with age will occur.
   Due to the light source variation a set of these projectors in a wall, are
   difficult to keep colour balanced between them for TV studio use.
   Due to optics focus etc. there will be some slight aberration/fuzziness.
   Less optics than a LCD, but dirt in air degrades optics difficult to
   maintain spotless!!
   Easy to get a large screen, with rear projection system or ceiling mount.
   Fan cooled, must be cooled off after use. QRM from lamp SMPS.

6/ Organic LED displays. Just comming on the market at huge cost, the printed
   colour LEDs on flexable foil system. These look like being the future as
   they are efficient, but as yet not very bright, not big, & sort lifetime.

The broadcasters are still deciding what standard to adopt to give the best
pictures, as each type of display types ideally needs different production
system / technique to give its best!

DEMO
At the lecture, the BBC chaps had a SONY 30" 720 x 2000 pixel LCD that looked
very good, but it produced a blue for back! They were able to show the same
pictures that I originally saw 16ft x 9ft from a huge œ1M LCD RGB projection
system 20 years ago, but not as clear on the Sony TV! Some of the early stuff
was made with a modified 1" vidicon camera producing 40MHz bandwidth per
colour, this was an extreme a challenge for the 4 linked up digital recorders
at the time!

Split picture comparisons of normal & HD were appreciated & showed the
difference could be seen by many, but by no means all could see a difference.
With a standard aerial installation they also tuned into a London HD test &
compared off air HD to off air normal freeview.

COMPRESSION
TV starts out at the camera at a HD studio camera at an amazing 1.2Giga B/S,
but it is compressed down & broadcast at only 19MB/S, normal widescreen TV is
between 10MB/S to as low as 1 MB/S on some channels! Which is why it is often
full of annoying MPEG artifacts. (easily seen on a large screen)

Better compression systems are around, but to compress at all, will always
produce some artifacts when doing something unusual with the picture.
e.g. cross fade or shake camera, need 25/50 new frames per second, not the 1 or
2 digital give you!

Most channels (except BBC1) use a shared statistical multiplexer, this allows
for more channels most of the time, but with the odd few seconds where there is
not enough bandwidth to cope with demand & a channel picture will then freeze
awaiting some spectrum to become available for an new I frame for example. This
is nothing to do with errors!

CONVENTIONS
Note also that HDTV systems are often worse at displaying standard TV as
horrible up conventions are done!

SPECTRUM
When the UK analogue TV is switched off in 2012, the spectrum freed up will not
be available for HDTV! The broadcasters are expect to cope with what they have
& encourage more/better compression or to buy back commercial spectrum for HDTV.

A new version of Set Top Boxes will be needed for everyone for HDTV at some
time. Already 1 upgrade in Aug 2008 made 250,000 TV screens go blank after an
upgrade leaves Freeview boxes 'obsolete'.



Y Don't U send an interesting bul>?

73 de John G8MNY @ GB7CIP


Read previous mail | Read next mail


 14.11.2024 18:24:49lGo back Go up