| |
UT1HZM > PSK 05.02.08 13:01l 176 Lines 4574 Bytes #999 (0) @ WW
BID : 16036_UT1HZM
Read: GUEST
Subj: New release (4.7) of MULTIPSK
Path: IZ3LSV<IW2OHX<UA6ADV<RN6AM<RU9CYA<UT1HZM
Sent: 080205/1009Z @:UT1HZM.KREM.POL.UKR.EU #:16036 [Kremenchug] FBB7.00i
From: UT1HZM@UT1HZM.KREM.POL.UKR.EU
To : PSK@WW
--- from F6CTE:
Hello to all Ham and SWL,
The new release of MULTIPSK (4.7) is in my Web site (http://f6cte.free.fr).
The main mirror site is Earl's, N8KBR: http://multipsk.eqth.info/index.html
(click on "United States Download Site #1").
Another mirror site isTerry's: http://www.hamshack.co.uk/
Multispk associated to Clock are freeware programs but with functions submitted
to a licence (by user key).
The main modifications of MULTIPSK 4.7 are the following:
1) Decoding of ACARS mode in VHF
The ACARS (Aircraft Communication Addressing and Reporting System) VHF mode is
a digital datalink system allowing transmission of small messages between
aircraft
and ground stations in VHF.
It is available for licencied copies, only (otherwise, the decoding is stopped
after 5 minutes). See specifications further on.
2) GMDSS DSC: possibility to display ships position on a local map chosen by
the user.
3) Interface with:
- DXView, which locates the exported callsign from Multipsk on a map, gives you
geographical information about it and directs your antenna towards this
callsign,
- Pathfinder, which, from the exported callsign from Multipsk, does a search of
the
callsign, on the chosen database ("QRZ" for example) and gives you the available
information about this callsign.
These softwares belong to the DXLAB suite (from Dave AA6YQ).
4) ADIF and DXKEEPER export under 2.1.9 ADIF specification
The submode ("32-1000 Hz" for Olivia, for example) is exported towards DXKEEPER
version 6.1.0 minimum (DXLAB).
5) addition of RTTY 110, 150 and 200 bauds modes in RX only.
6) ARQ FAE in ALE and ALE400
- Improvement of the Outlook Express (or equivalent) outgoing mails handling,
- Automatic transfert of received ARQ FAE messages, to Internet addresses via
Outlook
Express e-mails (for licencied copies),
- Possibility to work in "Responder".
7) button "N" near "Name": it is determined and displayed the number of QSO
done with
this Ham and the number of QSO done with this Ham and in this mode.
8) Improvement of the radio mailbox for a easier handling of messages.
9) Labels printing for the QSOs of the logbook.
For information, for all the Multipsk exotic modes (PSKFEC31, PSK10, PSKAM,
PSK63F,
PSK220F (+DIGISSTV), CCW-FSK, MFSK8, THROBX, DominoF, DominoEX, PAX, CHIP,
Voice,Packet 110 bauds...), I propose the QRP frequency: 14075 Khz USB (AF
around 1000 Hz),
at 17h00 UTC.
73
Patrick
ACARS in VHF
The ACARS (Aircraft Communication Addressing and Reporting System) VHF mode is
a digital
datalink system allowing transmission of small messages between aircraft and
ground stations
via radio (VHF).
Description :
Baud rate : 2400.
Modulation : MSK two tones (" mark " and " space ") with a shift between tones
of 1200 Hz
(fixed tones at 1200 and 2400 Hz)
Reception mode: AM
Character set : ASCII characters (7 bits) + a final parity bit
Shape of pulse : rectangular
Bandwidth : about 3 KHz
Demodulation : non coherent
Synchronization : automatic using the signal
Detection code : yes on 16 bits.
Interleaving : no
Pmean/Ppeak : 1
According to the ARINC 618 specification, each frame contains:
* a pre-key of 128 bits at "1" (2400 Hz carrier for 0.05 second)
* Bit synchronization. 2 characters "+" and "*" to synchronize at bit level,
* Character synchronization: 2 characters SYN (CHR(22)) to synchronize at
character level,
* ACARS start of transmission: character SOH (CHR(1)),
* Mode: a character for the type of transmission with the ground stations ("2",
"@", "A" to
"Z", "[", "\", "]"),
* Address: aircraft registration number. This number corresponds either to an
aircraft type
and an airline company or to a flight identifier (airline on 2 characters and
number on 4
alphanumeric characters),
* Acknowledgement: a character 0-9, a-z or A-Z for pour the acknowledgement and
the NAK
(CHR(21)) character to refuse the acknowledgement,
* label: two characters to designate the type of message,
* Block identifier: on one character 0-9, a-z or A-Z
* End of preamble: character STX (CHR(2)),
* Text: message (optional). The (variable) maximal size is 220 characters,
* Suffix: character ETX (CHR(3)) indicating the end of the message,
* BCS (Block Check Sequence): control code of the frame on 2 characters,
* BCS suffix: character DEL (CHR(127)).
Note 1: Multipsk decodes neither the PSK Acars in VHF nor the HF Acars.
Note 2: Multipsk can fix two single errors.
---end of quote
73, Sergej
--- FBB MsgEdit/Win pre
* Packet forever :-)
Read previous mail | Read next mail
| |
