OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
G4APL  > PACTOR   15.03.22 21:15l 130 Lines 4452 Bytes #999 (0) @ WW
BID : 63052_GB7CIP
Read: GUEST
Subj: GB7CIP HF PACTOR PACKET INFO
Path: IZ3LSV<I0OJJ<EA2RCF<LU9DCE<VA3TOK<VE3KPG<GB7CIP
Sent: 220315/2014Z @:GB7CIP.#32.GBR.EURO #:63052 [Caterham Surrey GBR]
From: G4APL@GB7CIP.#32.GBR.EURO
To  : PACTOR@WW


GB7CIP HF PACTOR PACKET INFO
GB7CIP HF PACTOR FREQUENCIES

Hello and thanks for your interest in reading this.
The following describes GB7CIP AX25 BBS System PACTOR frequencies.
Note: Relies on this Wireless AX25 BBS service 
      when the Internet links fail.

GB7CIP Lin_XFBB server forward scripts automatically controlling
   SCS PTC-iiPro multimode controller
   Kenwood TS480-Sat (No.1) (First operational November 2005)
      Scanning, band and frequency selection
      Switching between a ground mounted trapped vertical (80-10m) 
      and 3ele HF Beam (20,15,10m)
      Rotator HAM VX/DCU1X and HF beam direction

Tones(4) 1400Hz/1600Hz USB for P1 P2 and P3 modes

CURRENTLY NOT ACTIVE ON HF PACKET GB7CIP's 2nd KENWOOD TS-480SAT (No.2)
FAILS TO TRANSMIT FAULT (Failed December 2020) :(.....
Tones(1) 2100Hz/2300Hz   USB 300bd or 600bd PACKET (manual mode change) 
         28128.4kHz Dial Frequency wire dipole
         Mark frequency 28130.5kHz
         GB7CIP Beacons every 6 minutes for netting purposes

Note: Paul also has a third set-up used for one to one QSO's
and propegation path testing.             

g4apl Paul (gb7cip HF PACTOR) 
Always looking for new HF AX25 PACTOR Forwarding partners.
Australia, New Zealand, Asia, South America, North America

He also likes having one to one HF PACTOR QSO's please arrange sked,
either via Centre Frequency 14110.5 USB (Dial 14109.00) using
Full Duplex (PD 1). Connect to GB7CIP-0 BBS FBB_Convers 
One connected and logged in, Enter the  C  (command) for the convers
server which Paul finds very usefull for support use as well.

Or via 14109.0 USB centre frequency used for one to one (Call CQ).
Nets 14107.5kHz USB Dial. using 1600/1400hz tones.

During 2020/2021  COVID-19 Lockdown more Radio Amateurs are 
coming on with their PACTOR SYSTEMS running P1, mode using non SCS
equipment (PK232, KAM Controllers that support PACTOR), as well 
as others coming back on with their SCS PTC controllers.
Wonder if you are still active?
Australia, Western Europe North Africa and now Central America.
If Paul notices you have logged on. 
He will connect back.  Using the above tones dial USB 14107.5kHz

PACTOR AX25 LinFBB Forwarding sessions commence hourly 
at 28 minutes past the hour.

HF Pactor Frequencies being scanned for connections
    Mark frequencies listed below are based on 1600hz 1400hz tones.
    If you use different tones you will need to minus your
    high tone from the USB Mark Frequency listed below to
    get the USB dial frequency.


HF Beam Headings in unattended mode - Times in GMT/UTC (approx)
VK/ZL Long Path (South America) 05:28-07:27, 
VK/ZL EU Asia Short Path 07:28-10:27
North America   00:28-02:27,13:28-23:27
Other Times  Towards mainland Europe, Far East, 
Africa and Short Path Oceania.


40M 24 hours  20M 00:00-23:59 UTC 15M 08:00-14:59 10M 08:00-14:59
##################
MARK QRG USB  DIAL QRG USB  Mode
 7048.00       7046.40      P1,P2
 7050.00       7048.40      P1,P2
 7051.50       7049.90      P1,P2,P3


14093.50      14091.90      P1,P2
14094.00      14092.40      P1,P2
14096.00      14094.40      P1,P2
14096.60      14095.00      P1,P2

14097.50      14095.90      P1,P2
14098.00      14096.40      P1,P2

14107.00      14105.40      P1,P2,P3
14107.50      14105.90      P1,P2,P3
14110.50      14108.90      P1,P2,P3 

21098.00      21096.40      P1,P2
21098.60      21097.00      P1,P2
21098.80      21097.20      P1,P2
21096.60      21095.00      P1,P2

21112.00      21110.40      P1,P2,P3

28306.00      28304.40      P1,P2,P3 primary frequency
28130.00      28128.40      P1,P2 

You can test the AX25 Mail path to GB7CIP.#32.GBR.EURO from your
home BBS. Using the PING route facility. By sending a message
in the following format to the GB7CIP PING Server..

SP PING@GB7CIP.#32.GBR.EURO
Subject: ping
Message: AX25 Mail Routing Path Test
with a /EX on a new line to end message

Current listed active AX25 BBS forward partners are
EU  DB0ZAV F3KT IK0MIL IR0UGN IR2UFV OK0PBR UT1HZM YT7MPB 
North America N9LYA
When propagation behaves itself. Which it is not currently
due to Sparadic E's.. 
I find this always interesting when HF paths are open.

Reviewed 15.03.2022

Hope the above information was useful to you.
Background information can be found on the following web URL.

73 de Paul g4apl SysOp GB7CIP
--
g4apl@gb7cip.#32.gbr.euro https://www.theskywaves.net/pactor.html





Read previous mail | Read next mail


 23.12.2024 06:35:39lGo back Go up