| |
G4APL > PACTOR 29.05.14 15:52l 42 Lines 1417 Bytes #999 (0) @ WW
BID : 3135G4APL
Read: GUEST
Subj: Re: UBUNTU 12.04 PTC CLIENT REQD
Path: IZ3LSV<I0OJJ<GB7CIP<GB7CIP<GB7CIP
Sent: 140529/1446Z @:GB7CIP.#32.GBR.EU $:3135G4APL
T:From: Paul Lewis <g4apl@gb7cip.ampr.org>
T:Newsgroups: ampr.coms.pactor
T:Message-Id: <lm7gmb$ikc$1@gb7cip.ampr.org>
Hi all again
Found and installed cutecom. That has spilt screen, so an inprovment on
using Putty.
Proved that all 8 serial ports on my VScomm TC-800L actually work.
Though not all keeping alive to the Socat/Kassattach'ed ax25d TNC's at the same time.
or the ax25d ramdom port up/down selector.
Will have to investigate the Kissattach Serial side. That is another story.
Back to the PACTOR Question listed again below.
73 de Paul G4APL
Paul Lewis <g4apl@gb7cip.ampr.org> wrote:
> Hello Pactor and data communimication readers.
>
> I am looking for a Program/Binary Source Code Client to
> be able to control my SCS PTC II Data Modems.
>
> I need to be able to install, compile configure under Ubuntu 12.04LTS
> (Linux). For testing and one to one QSO's
>
> Current testing with putty :(
> KPTC which I have used in the past unde a KDE platform, appears to be not
> available under this release and uses the KDE environment which I am not using.
>
> I do not want to run anything under WINE.
>
> Linfbb is already controlling the other PTC controllers / Radios
>
> Can anyone recommend anything that will compile and run under this platform.
>
> 73 de Paul g4apl SysOP GB7CIP HF PACTOR/AXIP/AXUDP/UHF Gateway
>
--
amprnet g4apl@gb7cip.ampr.org ax25 g4apl@gb7cip.#32.gbr.eu
Read previous mail | Read next mail
| |
