| |
F1UBL > LORA 12.12.24 10:53l 16 Lines 822 Bytes #291 (0) @ WW
BID : 598_F1UBL
Read: GUEST
Subj: LORA packet radio via rnode?
Path: IZ3LSV<I0OJJ<LU4ECL<VK2RZ<VK5RSV<K7EK<F1UBL
Sent: 241212/0947Z 598@F1UBL.FRPA.FRA.EU LinBPQ6.0.24
Hello,
I am still looking for a way to use a lora card to create access to my BBS via LORA on 433 MHz.
I now know that the kiss interface of APRS software does not support connected mode.
So I found another solution, rnode via this website: https://wiki.oarc.uk/packet:lora#lora_packet_radio
I install it on a LORA card, and it seems to act as a TNC with a KISS mode activated on demand. If I connect the card with the specified command (in my case it is ):
rnodeconf -T --freq 433775000 --bw 125000 --sf 12 --cr 5 COM7
the card asks me for power and finally confirms that the device is set to TNC operating mode.
So I open a putty on the serial port: the card reboots in AP wifi mode and I can't use it as a tnc.
Do any of you know how it works or have any information about it?
Vy 73's from Stephan
f1ubl@orange.fr
Read previous mail | Read next mail
| |
