| |
VK7AX > LINHAM 03.06.08 08:18l 38 Lines 1389 Bytes #999 (0) @ WW
BID : VK7AX-0306AA
Read: GUEST
Subj: Re: SCC Card Driver
Path: IZ3LSV<IK2XDE<DB0RES<ON0AR<HS1LMV<DL1ZAV<CX2SA<VK7AX
Sent: 080603/0724Z @:VK7AX.#ULV.TAS.AUS.OC #:46743 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : LINHAM@WW
From: "Patrick A. Ouellette" <pat@flying-gecko.net>
Date: Mon, 2 Jun 2008 09:19:44 -0400
To: Ray Wells <vk2tv@exemail.com.au>
CC: "Mike McCarthy, W1NR" <lists@w1nr.net>, Mariusz Kozlowski <m.kozlowski@tuxland.pl>, linux-hams@vger.kernel.org
On Mon, Jun 02, 2008 at 03:03:45PM +1000, Ray Wells wrote:
> >
> > I normally use my old config file but because I'm jumping quite a few
> > kernel releases I decided to start from scratch.
> >
Ray,
Are you aware of the kernel makefile target "oldconfig"?
Put your old config file in the proper directory for the kernel build and
do a make oldconfig and you will get prompted for the new stuff without changing
already selected kernel options.
Pat
-- Patrick Ouellette pat@flying-gecko.net ne4po (at) arrl (dot) net Amateur Radio: NE4PO "Crank the amp to 11, this needs more cowbell - and a llama wouldn't hurt either" "Your arguments are an odd mix of overly optimistic on one side and overly pessimistic on the other"
--
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN ATTEMPT TO PROMOTE
FURTHER INTEREST IN HAM SOFTWARE USING LINUX OPERATING SYSTEMS & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
