OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
VK7AX  > LINHAM   03.06.08 09:16l 51 Lines 1809 Bytes #999 (0) @ WW
BID : VK7AX-0306CW
Read: GUEST
Subj: Re: SCC Card Driver
Path: IZ3LSV<IK2XDE<F5GOV<CX2SA<ZS0MEE<VK4TRS<VK7AX
Sent: 080603/0718Z @:VK7AX.#ULV.TAS.AUS.OC #:46740 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To  : LINHAM@WW


From: Ray Wells <vk2tv@exemail.com.au>
Date: Mon, 02 Jun 2008 07:18:54 +1000
To: "Mike McCarthy, W1NR" <lists@w1nr.net>
CC: Mariusz Kozlowski <m.kozlowski@tuxland.pl>, linux-hams@vger.kernel.org


Mike McCarthy, W1NR wrote:

> Ray Wells wrote:
>
>> Mariusz
>>
>> You raise a good point and I didn't check. I did notice that all ax25 kernel stuff is no longer enabled as modules by default.
>>
>> I suspect there has been a change between 2.6.25.1 and 2.6.25.4 because in 2.6.25.1 (which I'm compiling now) the ax25 stuff, including SCC, is enabled as modules by default.
>>
>> Perhaps I was to used to what used to be!! Slap on wrist.
>>
>> Thank you for your suggestion.
>>
>> Ray vk2tv
>
> Ray,
>    What distro are we talking about?  mkiss and ax25 modules are present on Fedora 9 with the 2.6.25.3 kernel.  Including them or not is normally a distro specific thing.
>
> Mike, W1NR
> -- 

Mike,

I'm compiling on Debian 4.0 but as you say, it shouldn't be relevant. The kernel source came from kernel.org.

Just to be sure I wasn't fooling myself, with both 2.6.25.1 and 2.6.25.4 I deleted the unzipped source and unzipped again. For each source I ran make menuconfig. The ax25 options were not selected by default in 2.6.25.4 but they were in 2.6.25.1.

I haven't been able to go back into 2.6.25.4 to see if ISA was selected re the SCC problem but I'll do that probably today.

Ray vk2tv
-- 


**************************************************************************
 ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN ATTEMPT TO PROMOTE
 FURTHER INTEREST IN HAM SOFTWARE USING LINUX OPERATING SYSTEMS & PACKET RADIO
 Courtesy Tony VK7AX  VK7AX@VK7AX.#ULV.TAS.AUS.OC 

**************************************************************************


Read previous mail | Read next mail


 18.10.2024 23:31:15lGo back Go up