| |
VK7AX > LINHAM 03.06.08 09:09l 36 Lines 1249 Bytes #999 (0) @ WW
BID : VK7AX-0306LA
Read: GUEST
Subj: Re: SCC Card Driver
Path: IZ3LSV<IQ0LT<IW2OHX<I0TVL<CX2SA<ZL2BAU<VK7AX
Sent: 080603/0716Z @:VK7AX.#ULV.TAS.AUS.OC #:46739 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : LINHAM@WW
From: "Mike McCarthy, W1NR" <lists@w1nr.net>
Date: Sun, 01 Jun 2008 08:03:09 -0400
To: Ray Wells <vk2tv@exemail.com.au>
CC: Mariusz Kozlowski <m.kozlowski@tuxland.pl>, linux-hams@vger.kernel.org
Ray Wells wrote:
> Mariusz
>
> You raise a good point and I didn't check. I did notice that all ax25 kernel stuff is no longer enabled as modules by default.
>
> I suspect there has been a change between 2.6.25.1 and 2.6.25.4 because in 2.6.25.1 (which I'm compiling now) the ax25 stuff, including SCC, is enabled as modules by default.
>
> Perhaps I was to used to what used to be!! Slap on wrist.
>
> Thank you for your suggestion.
>
> Ray vk2tv
Ray,
What distro are we talking about? mkiss and ax25 modules are present on Fedora 9 with the 2.6.25.3 kernel. Including them or not is normally a distro specific thing.
Mike, W1NR
--
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN ATTEMPT TO PROMOTE
FURTHER INTEREST IN HAM SOFTWARE USING LINUX OPERATING SYSTEMS & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
