| |
VK7AX > LINHAM 03.06.08 09:08l 54 Lines 1393 Bytes #999 (0) @ WW
BID : VK7AX-0306ZE
Read: GUEST
Subj: Re: SCC Card Driver
Path: IZ3LSV<IK2XDE<DB0RES<WA7V<VK7AX
Sent: 080603/0715Z @:VK7AX.#ULV.TAS.AUS.OC #:46738 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : LINHAM@WW
From: Ray Wells <vk2tv@exemail.com.au>
Date: Sun, 01 Jun 2008 17:18:56 +1000
To: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
CC: linux-hams@vger.kernel.org
Mariusz
You raise a good point and I didn't check. I did notice that all ax25 kernel stuff is no longer enabled as modules by default.
I suspect there has been a change between 2.6.25.1 and 2.6.25.4 because in 2.6.25.1 (which I'm compiling now) the ax25 stuff, including SCC, is enabled as modules by default.
Perhaps I was to used to what used to be!! Slap on wrist.
Thank you for your suggestion.
Ray vk2tv
Mariusz Kozlowski wrote:
> Hello,
>
>
>
>>> I grabbed kernel 2.6.24.4 yesterday and there is no option in the ax25 configuration for the SCC driver.
>>>
>>> Can anyone advise if this is an oversight?
>>>
>> Oops. That should read 2.6.25.4
>>
>
> Did you enable ISA support?
>
> config SCC
> tristate "Z8530 SCC driver"
> depends on ISA && AX25 && ISA_DMA_API
>
>
> Mariusz
> --
**************************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN ATTEMPT TO PROMOTE
FURTHER INTEREST IN HAM SOFTWARE USING LINUX OPERATING SYSTEMS & PACKET RADIO
Courtesy Tony VK7AX VK7AX@VK7AX.#ULV.TAS.AUS.OC
**************************************************************************
Read previous mail | Read next mail
| |
