|
RN1M > LINUX 05.02.24 18:20l 47 Lines 1164 Bytes #999 (0) @ WW
BID : 790_RN1M
Read: GUEST
Subj: Re: Problem with pipx\pip3
Path: IZ3LSV<I0OJJ<EA2RCF<LU9DCE<W0ARP<K7EK<VE3CGR<R2AKT<RN1M
Sent: 240204/2050Z 790@RN1M.SPB.RUS.EU LinBPQ6.0.24
Eric, hello!
On Sat, 03 Feb 24 17:19:00 Z
WG3K wrote:
> I don't run a RaspberryPi but I do have a Debian box so maybe this
> will be helpful...
>
> I suspect you can install pyserial directly from the distribution
> repository using apt:
>
> $ sudo apt install python3-serial
>
> I'm guessing that's what the error message is suggesting.
I'm new to Linux, but thanks to the community I succeeded, below is the approximate order of command options, don't judge strictly. We managed to launch and flash the lore module as KISS TNC.
sudo apt install python3-pip
sudo apt install python3-full
sudo apt install pipx
sudo apt-get install build-essential libssl-dev libffi-dev \
python3-dev cargo pkg-config
pipx ensurepath
pipx install rns
pipx install pyserial
;or pip3 install --break-system-packages --user pyserial
pipx inject rns pyserial
pipx install cryptography
; or sudo apt install python3-cryptography
pipx run --spec rns rnodeconf -h
pipx install rns --force
Web version on the Internet at the link: https://shorturl.at/knpNY
73!
--
1200 baud it's greater, than zero bits per second :)
Best regards, Sergey Ievkov <RN1M@RN1M.SPB.RUS.EU>
Read previous mail | Read next mail
| |