| |
VK7AX > LINHAM 12.07.08 04:22l 66 Lines 2445 Bytes #999 (0) @ WW
BID : VK7AX-1207DB
Read: GUEST
Subj: DBLog 0.13.2
Path: IZ3LSV<IK2XDE<DB0RES<DB0GOS<ON0AR<HS1LMV<7M3TJZ<XE1FH<ON0BEL<VK7AX
Sent: 080712/0227Z @:VK7AX.#ULV.TAS.AUS.OC #:48945 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : LINHAM@WW
From: Pino Zollo <pinozollo(AT)gmail.com>
Date: Fri, 11 Jul 2008 13:07:23 -0400
To: Yahoo linux hams <linuxhams(AT)yahoogroups.com>,
CC: "Psk31 at qth.net" <psk31(AT)mailman.qth.net>
The new version of DBLog, the 0.13.2 is available on
http://www.qsl.net/zp4kfx/Linux
News:
Special for developers of other HAM radio applications as programs
for digimodes, EME or Meteorscatter.
DBLog now works also as 'Log server': another program can send
commands to DBLog via TCP on port 3164 to fill fields and to log QSOs.
DBLog replies with 'Name' and 'QTH' if the call has been worked before.
More infos in the file SERVER_DOC included into the distribution.
------
DBLog is a logging program for radio amateurs based on a relational
Data Base.
The main table conforms to ADIF specifications.
It allows to log QSOs, export a range of them in ADIF format and
import from an ADIF file.
It keeps statistics of DXCC worked countries in mixed mode.
It reads the VFO frequency via the hamlib daemon rigctld, so all radios
supported by hamlib can be used.
When rigctld is active appears the Band Map graphic windows which shows
an analogical representation of the radio tune. Clicking on the tune
scale will set the radio VFO.
It includes a CW Keyer based on cwdaemon.
Receives cluster spots from xdx by PG4I, checks them against local
statistics and shows the results in a dedicated window.
If Cluster is active spots are shown also on the Band Map.
The Band Map can store permanently spots or frequencies.
Clicking on a cluster spot sets the radio VFO, honouring QSX an UP
information in case of split.
In RUN mode it will remember the CQ frequency, while in S&P a call
written into the entry window will be remembered.
Shows the azimuthal map of the earth centred on the QTH using xplanet.
If the other station call is present, his position is also shown.
The NCDXF beacons can be monitored by band or by beacon.
A map is available to see where beacons are located.
Beta testers and feedbacks appreciated.
73
Pino ZP4KFX
--
***************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT
TO PROMOTE FURTHER INTEREST IN HAM SOFTWARE USING LINUX
OPERATING SYSTEMS AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
***************************************************************
Read previous mail | Read next mail
| |
