| |
VK7AX > LINHAM 10.07.08 04:20l 50 Lines 1561 Bytes #999 (0) @ WW
BID : VK7AX-1007LM
Read: GUEST
Subj: Re: gMFSK ?
Path: IZ3LSV<IK2XDE<DB0RES<WA7V<N9ZZK<CX2SA<VK7AX
Sent: 080710/0220Z @:VK7AX.#ULV.TAS.AUS.OC #:48835 [Ulverstone] FBB7.00g $:VK7A
From: VK7AX@VK7AX.#ULV.TAS.AUS.OC
To : LINHAM@WW
From: Erik Jakobsen <erik_ja(AT)mail.tele.dk>
Date: Wed, 09 Jul 2008 16:37:32 +0200
To: linux-hams(AT)vger.kernel.org
Nate Bargmann wrote:
>
>
> Please go to http://groups.yahoo.com/group/linuxham/ and sign up for
> that mailing list which is the support list for Fldigi. There are many
> knowledgable members on that list including the Fldigi developers.
They can really help you.
>
> As one of the Hamlib developers, I'm puzzled why you're having a
> problem. As Dave wrote, it could be an obscure setting. Looking at
> the CVS source for the ts570.c I see that post_write_delay = 30 by
> default. Since I work with Yaseu code, I'm not much help here either.
>
> Sometimes these things can be maddening as a lot of pieces must work
> together perfectly. Don't give up and do just the linuxham group.
>
> HTH,
>
> 73, de Nate >>
>
>
I'm now a member of the group.
I have been inside the ts570.c too, and have edit the value to 50.
But at that time I had not in mind, that I have installed openSUSE11.0.
I used 10.3 before, and haven't installed th4e gcc :-(
I will try to compile make make install again.
Tnx Nate
73,
Erik, OZ4KK
--
******************************************************************
ABOVE IS A CROSS POST TO THE PACKET RADIO NETWORK IN AN EFFORT TO
PROMOTE FURTHER INTEREST IN HAM SOFTWARE USING LINUX OPERATING
SYSTEMS AND PACKET RADIO
Courtesy Tony VK7AX VK7AX(AT)VK7AX.#ULV.TAS.AUS.OC
******************************************************************
Read previous mail | Read next mail
| |
