| |
ZL1ANM > KENWOO 26.09.08 05:40l 31 Lines 1161 Bytes #999 (0) @ WW
BID : ZL1ANM-527
Read: GUEST
Subj: Re: ? TR-9000 / TR-9130 ?
Path: IZ3LSV<IW0QNL<ON4HU<ON0BEL<ZL2BAU<ZL1AB
Sent: 080919/2324Z @:ZL1AB.#06.NZL.OC #:18843 [AUCKLAND] FBB7.00i $:ZL1ANM-527
From: ZL1ANM@ZL1AB.#06.NZL.OC
To : KENWOO@WW
>From: DB1YV @ DB0WAL.#NRW.DEU.EU (Josef)
>
>I have got a Kenwood TR 9000 and a TR 9130. The power amplifier modules
>on both devices are broken. I found in the internet, that the
>Mitsubishi-Modul M57727 is used to be for the TR 9130 and for the TR9000
>itīs the Modul M57713. The last one is not avaiable.
>
>My Question:
>Are both Transceiver TR 9000 and 9130 constructed in the same way, so
>that I can insert the module M57727 in both Transceivers?
I once owned a TR-9130. The power amplifier module became kaput and was
obsolete so unable to obtain replacement. I figured the driver stage was
capable of supplying about 5 watts, so I removed faulty module (unsolder
5 connections to PCB, remove 2 screws) and soldered short piece (5cm) of
coax between PCB In/Out termination points. These are both 50 ohm points
so should be good match.
This mod was successful for FM at the 5 watt level. I cannot recall if
SSB operation was OK, but that mode didn't interest me anyway. Hope this
has been helpful.
73 de Neil ZL1ANM
T4 1.5ā24
Read previous mail | Read next mail
| |
