| |
PD0SNK > WINFBB 03.01.12 10:29l 79 Lines 2350 Bytes #999 (0) @ WW
BID : 8966_PI8SNK
Read: GUEST
Subj: Housekeeping fbb 7.01b
Path: IZ3LSV<IW0QNL<VE2PKT<PI8APE<PI8SNK
Sent: 120103/0814Z 8966@PI8SNK.#FRL.NLD.EU [SNEEK/SNITS] FBB7.01.35 alpha
From: PD0SNK@PI8SNK.#FRL.NLD.EU
To : WINFBB@WW
** Message generated by:
** FSG WinFBB Message Editor v2.0b (c)2000 FSG's JO1HDV
--------------------------------------------------------
Hi,
Dont know if this was ever posted @ww but here is 7+ and info
on howto get the housekeeping running a bit better with fbb32 7.01b1
The folowing is also to be found in the 7+ file.
I did not wrote this help/info its from N9PMO and i works great over here.
73 Danny PD0SNK
Extract all to the root of WinFbb,
WinFBBEPUR.exe
Maintinf.exe
FBBBPQ.EXE
Generic.dll This MUST Be in the Root not Driver Folder
Edit the FBBBPQ.BAT for your Call Sign
set FBB= "C:\Program Files\WinFbb" If other then set correct path
From the WinFbb Console Window, CONFIG, Housekeeping, General Tab have (only)
the Following Selected:
Pre Commands
CLR User
EpurMess
Post Commands
In the Pre Command File Set Path C:\Program Files\WinFbb\Maintinf.exe
In Post Command File set Path C:\Program Files\WinFbb\FBBBPQ.bat
MaintInf, EPURMESS and EPURWP will be created by the FBBBPQ.BAT
At 00 HRS a report will be imported to BBS as a Personal
EpurMess Tab Check Archive Personals & Archive Bulletins Click OK
The Maintinf.exe allow you to manually delete the bad call signs using
the Dos Command Box, C:\Program Files\WinFbb maintinf.exe /i you
will be promted to delete Y/N
Import the fbb.reg by left clicking, add registry value
The WinFbbEpur.exe
Allows the Bulletin Lifetime Test to over ride a message flagged as B$ to
Be killed, an example would be TO WX I kill them at 00Hrs as they are sent out
Daly but the bulletin may have not been forwarded to a partners BBS that is
Down so it remains Flagged as B$ Mine is > WX 0 0 if you were concerned about
Your partner not receiving a day old bulletin you would set as > WX 0 you can use
The second value for a day or two later > WX 0 2
First value applies to all but B$. Second to B$ only
You have to edit this in the registry LOCAL_MACINE_SOFTWARE_WinFbb Housekeeping Life Times
You right click on Life Times, Modify this will open a window you can edit TO FROM VIA (> < @)
I did find one other problem with the Months to delete user in CONFIG, Housekeeping, EpurWP/MaintInfMonths
Tab, to change the number of months you need to go to Registry, Housekeeping, EpurWP, ClrUser & MaintInfMonths
Read previous mail | Read next mail
| |
