| |
N9SEO > BPQ 07.06.24 03:24l 57 Lines 1883 Bytes #195 (0) @ WW
BID : 20426_N9SEO
Read: GUEST
Subj: To: YT7MPB Re: ARDOP port and CAT issue
Path: IZ3LSV<DB0ERF<DK0WUE<PI8ZTM<PI8LAP<PA8F<VE3CGR<KF5JRV<N9SEO
Sent: 240607/0120Z 20426@N9SEO.#NAR.AR.USA.NOAM LinBPQ6.0.24
On Thu, 06 Jun 24 18:34:00 Z
YT7MPB wrote:
> R:240606/1835Z 2203@K5DAT.#NEWI.WI.USA.NOAM LinBPQ6.0.24
> R:240606/1835Z 10140@WA8RSA.WA8RSA.#SWMI.NOAM,USA LinBPQ6.0.22
> R:240606/1835Z 22167@WA2UET.#ENY.NY.USA.NOAM BPQ6.0.23
> R:240606/1835Z 12523@W9GM.#SWWI.WI.USA.NOAM BPQ6.0.24
> R:240606/1834Z @:K3CHB.#EPA.PA.US.NOAM #:36123 [Camp Hill]
> $:10308_YT7MPB R:240606/1834Z 10308@YT7MPB.#NSD.SRB.EU LinBPQ6.0.24
>
> Hi there,
>
> I have been experimenting with a newly added ARDOP port (instead of
> 300bd packet ports via QtSM). Now I noticed that radio control
> function (CAT) is not activated at the radio (no CAT icon anymore) if
> these two parameters are included within the ARDOP port
> configuration: INTERLOCK=1 and RADIO=1
>
> As soon as I remove those two params, the CAT icon is there again.
> But I cannot now prevent that ARDOP goes over an existing Pactor
> transmission. I tried to locate any information about possible bug in
> the ARDOP syntax but did not find anything. Any idea what might be
> wrong? Tnx!
>
> 73, Misko YT7MPB
>
Misko,
INTERLOCK and RADIO I believe are the same, So if you remove one it
should be ok. I believe G8BPQ said that eventually RADIO will replace
INTERLOCK on the forums sometime ago. But its been a while so you might
search around. I think it was in a response to one of my posts a few
years back. RADIO is also replacing "RIGCONTROL" eventually is my
understanding.
Tho I dont know are you using RIGCONTROL on a port or RADIO entries in
CFG. I only use RADIO=1 per port and then define a RADIO (cat)
definition like:
RADIO 1
FLRIG 192.168.200.113:12345 HAMLIB=4532 PTTMUX COM4
The standalone ARDOP client, for me I had to enable PTTMUX and set a
pair of psuedo ttys to get PTT to work. So in the above it'd be
something like COM4 to BPQ and COM5 to ARDOPC.exe.
Hope that helps clear up.
73 de N9SEO
Kayne
Read previous mail | Read next mail
| |
