| |
I0OJJ > BAYCOM 14.06.12 07:00l 60 Lines 2130 Bytes #999 (0) @ WW
BID : E6MI0OJJ_00U
Read: GUEST IV3JER
Subj: Re: Baycom_epp config ned
Path: IZ3LSV<IR1UAW<IQ5KG<I3XTY<I0OJJ
Sent: 120614/0557z @:I0OJJ.ILAZ.ITA.EU [Colleferro] obcm1.07b5
From: I0OJJ @ I0OJJ.ILAZ.ITA.EU (Gus)
To: BAYCOM @ WW
X-Info: Sent with login password
Janusz, have a good job!
gus i0ojj
--------------------------------cut here-----------------------------
#!/bin/bash
#
# Loaded modules and parallel port 'io', 'irq' setup
modprobe ax25; modprobe baycom_par; modprobe parport_pc io=0x378 irq=7
#
# Modem configuration:
# With the asterisk, i.e. "picpar*", means that software DCD is used
# Without the asterisk the hardware DCD is expected.
sethdlc -p -i bcp0 mode "picpar" io 0x378 irq 7
#
# AX.25 parameters: P=128, W=10, TX-Delay=60
sethdlc -i bcp0 -a txd 60 txtail 20 slot 10 ppersist 128 full
#
# AX.25 hardware device must be linked with the callsign
/sbin/ifconfig bcp0 hw ax25 sp1lop-9 up
# Other optional parameters
echo 100 > /proc/sys/net/ax25/bcp0/t1_timeout
echo 30 > /proc/sys/net/ax25/bcp0/t2_timeout
echo 30000 > /proc/sys/net/ax25/bcp0/t3_timeout
echo 10 > /proc/sys/net/ax25/bcp0/maximum_retry_count
echo 4 > /proc/sys/net/ax25/bcp0/standard_window_size
echo 256 > /proc/sys/net/ax25/bcp0/maximum_packet_length
# The network device "bcp0" is now linked with the IP addr 44.x.x.x
/sbin/ifconfig bcp0 44.x.x.x netmask 255.0.0.0 \
broadcast 44.255.255.255 up
# End
-------------------------------cut here---------------------------------
SP1LOP > BAYCOM 13.06.12 21:21l 10 Lines 244 Bytes #1 (999) @ WW
BID : D6MSR1BSZ00I
X-Flags: Type B Hold ! Prop ! Rep ! Cont ! Erase !
Read: I0OJJ
Subj: Baycom_epp config ned
R:120613/1921z @:I0OJJ.ILAZ.ITA.EU $:D6MSR1BSZ00I
R:120613/1823z @:IK6ZDE.IMAR.ITA.EU $:D6MSR1BSZ00I
R:120613/2020Z @:VE2PKT.#QBC.QC.CAN.NOAM #:15654 [STE-CATHERINE] FBB7.00i
R:120613/1914Z @:WA7V.#SEWA.WA.USA.NOAM #:22790 [C-Basin Hub] $:D6MSR1BSZ00I
R:120613/1914z @:SR1BSZ.SZ.POL.EU [Szczecin_PL] obcm1.07b5b LT:999
From: SP1LOP @ SR1BSZ.SZ.POL.EU (Janusz)
To: BAYCOM @ WW
X-Info: Sent with login password
Hi
I have modem BayCom it on TCM3105 need to connect him to LPT1
it and seeks configuration for Linux
73 de Janusz SP1LOP
Admin SR1BSZ system...
----------------------------------cut here------------------------------
Read previous mail | Read next mail
| |
