| |
IW2OHX > BAYBOX 03.05.09 07:20l 141 Lines 4150 Bytes #999 (0) @ ITA
BID : 35JIW2OHX01A
Read: GUEST IZ3LSV
Subj: Re: Forward
Path: IZ3LSV<IK2XDE<IR2UBX<IW2OHX
Sent: 090503/0620z @:IW2OHX.ILOM.ITA.EU [Bollate(MI)] obcm1.07b3
From: IW2OHX @ IW2OHX.ILOM.ITA.EU (Marco)
To: BAYBOX @ ITA
X-Info: Received by NNTP-gateway
Ciao Mauri,
premetto che e' una configurazione che non ho mai provato.
Comunque dando una lettura al manuale ho capito che gli
users non vanno assolutamente settati in fwd.bcm.
Per trasferire la posta gli utenti devono collegarsi al
SSID del BCM dove questi risponde con il prompt del forward.
In init.bcm abbiamo:
; --- packet interface ---
mycall IW2OHX-1 IW2OHX-6
fwdssid 9
ax25k_if IW2OHX-11
IW2OHX-1 e' dove BCM risponde con il prompt dei comandi;
IW2OHX-6 e' dove risponde con il prompt per il forward;
=>c 7:iw2ohx-6
link setup (7)...
*** connected to IW2OHX-6
[OpenBCM-1.07b3-AB1D1FHMRW$]
>
Va poi configurato il parametro UFWD che attiene alla
funzione User Store & Forward.
HELP UFWD
::::::::::
:: UFWD ::
::::::::::
Comments about S&F for user
---------------------------
Every user can send/deliver his mails from and to his own BBS system via
user S&F feature of BCM. To use this feature you have to setup following:
- MYBBS must be set to that BBS that sends mails to user,
do not set MYBBS to your own BBS!
- to activate forwarding use command
ALTER UFWD <call> [<digi>]
and add a valid connect path.
Forwarding to user is started each time when a new mail is received.
If his BBS can not be reached, no further connect tries are done until
another
new mail for that call is received.
User BBS can connect everytime to BCM, but BBS call must be connected
with S&F SSID (see also HELP PAR MYCALL).
See also HELP ALTER UFWD and HELP UFWD PASSWORD
HELP ALTER UFWD
::::::::::::::::
:: ALTER UFWD ::
::::::::::::::::
Syntax: A(LTER) UF(WD) <boxcall> <digicall> [<entry digicall>]
A(LTER) UF(WD) PASSIVE
A(LTER) UF(WD) OFF
A(LTER) UF(WD)
The user S&F can be activated and a connect path to the user BBS can be
setup.
<boxcall> is the call with SSID of the own BBS. As SSID -8 is proposed. This
call can be however also another call than the usercall, for example that of
a
club station...
<digicall> <entry digicall> are calls of nodes between this BBS and the user
BBS, seen from this BBS to the user BBS.
Example: OE3FRU will like to do S&F with his WinGT mailbox system to the BCM
BBS OE3XSR-8. The WinGT mailbox system is configured as "OE3FRU-8". OE3FRU's
entry digi is OE3XNR-3, his MYBBS is OE3XSR-8, between is the digi OE3XSR.
BCM BBS boxdigi entry digi user BBS
oe3xsr-8 <==> oe3xsr <==> oe3xnr-3 <==> oe3fru-8
=> ALTER UFWD OE3FRU-8 OE3XSR OE3XNR-3
There are following possibilities for the user S&F:
ALTER UFWD OE3DZW OE3XSR-3 This BBS tries to connect to user BBS when a new
mail for that call arives in this BBS, connect
path is the path set with ALTER UFWD
ALTER UFWD PASSIVE no active connection from BBS to the user BBS,
the
user BBS must connect to fetch all waiting mails
ALTER UFWD OFF user S&F is disabled
ALTER UFWD shows the current settings
See also HELP UFWD
Come vedete la filosofia e' parecchio diversa rispetto all'UNPROTO di FBB
che generava un traffico assurdo.
Fatemi sapere se riuscite a configurare questa cosa.
Saluti,
Marco
ik1whn@ir1uaw.ilig.ita.eu wrote:
> Qualcuno e' riuscito a settare il forward per gli utenti che
> utilizzano PMS tipo tsthost sally o altri?
> Io ho provato ma settando un user nel file di fwd ovviamente
> viene visto come bbs e quindi perde la possibilita' di
> accesso come utente normale (ad ogni connessione con
> qualsiasi ssid viene proposto il prompt del forward) fbb
> discerneva le connessioni tramite ssid ma con open bcm sembra
> non funzionare.
> Qualcuno ci ha provato? non mi direte che tutti i bbs bcm
> non hanno utenti che si collegano in ax25 per trasferire la
> posta e quindi nessuno si e' posto il problema...
> Ogni suggerimento e' benvenuto
>
> 73 Mauri IK1WHN
--
---
OpenBCM Gateway NNTP><AX25
http://iw2ohx.ampr.org:8060
---
Marco Di Martino
Bollate (MI)
www.marcodimartino.it
www.iw2ohx.net
-
Amateur Radio: IW2OHX
IW2OHX@IW2OHX.ILOM.ITA.EU
---
Read previous mail | Read next mail
| |
