|
VK7AX > APRS 31.12.07 00:13l 67 Lines 1737 Bytes #999 (0) @ VKNET
BID : VK7AX-1412LS
Read: GUEST
Subj: [APRS] Digest Number 1437
Path: IZ3LSV<IW2OAZ<CX2SA<ZL2BAU<VK7NW
Sent: 071214/1225Z @:VK7NW.#ULV.TAS.AUS.OC #:32289 [NWTARIG] FBB7.00g $:VK7AX-1
From: VK7AX@VK7NW.#ULV.TAS.AUS.OC
To : APRS@VKNET
There is 1 message in this issue.
Topics in this digest:
1a. Re: Alinco DR-135 questions
From: ka1gl
Message
________________________________________________________________________
1a. Re: Alinco DR-135 questions
Posted by: "ka1gl" fjt@ka1gl.net ka1gl
Date: Thu Dec 13, 2007 6:49 am ((PST))
I'm using a DR-135TP with xastir under linux and it works great. The
tnc startup and stop files I'm using for it are basically the same as
the ones for the Kenwood D700A. Over the next week or two I plan on
doing some testing with UIView32, a DR-135T, and one of Scott's T2-135
tncs. Since I also have the EJ-41U tnc I try that one out also. I'll
post my results here if I see no one else has given you an answer.
----- Frank -----
----- KA1GL -----
--- In APRS@yahoogroups.com, Scott Miller <scott@...> wrote:
> >
> > Just wanted to check, because I sell another TNC board for the DR-135T
> > that I designed. It'd say Argent Data Systems in the login banner if
> > you've got one of mine.
> >
> > Scott
> > N1VG
> >
> > gregwilliams@... wrote:
>> > >
>> > >
>> > >
>> > > Yes I believe that is correct.
>> > >
>> > > Radio came without box/manual. It is labeled on the radio as a DR-135
>> > > but the TNC is built in.
>> > >
>> > > Greg
>> > >
>> > > On Wed Dec 12 20:31 , Scott Miller <scott@...
>> > > <mailto:scott%40opentrac.org>> sent:
>> > >
>> > > >
>> > > >
>> > > > Are you using the standard Alinco EJ-41U TNC? It comes with the
DR-135TP.
>> > > >Scott
Messages in this topic (5)
________________________________________________________________________
________________________________________________________________________
Read previous mail | Read next mail
| |