| |
CX2SA > SATDIG 26.06.09 01:52l 387 Lines 10932 Bytes #999 (0) @ WW
BID : 45846-CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V4 295
Path: IZ3LSV<IK2XDE<F8KFY<CX2SA
Sent: 090625/2350Z @:CX2SA.LAV.URY.SA #:45846 [Minas] FBB7.00e $:45846-CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Send AMSAT-BB mailing list submissions to
amsat-bb@xxxxx.xxx
To subscribe or unsubscribe via the World Wide Web, visit
http://amsat.org/mailman/listinfo/amsat-bb
or, via email, send a message with subject or body 'help' to
amsat-bb-request@xxxxx.xxx
You can reach the person managing the list at
amsat-bb-owner@xxxxx.xxx
When replying, please edit your Subject line so it is more specific
than "Re: Contents of AMSAT-BB digest..."
Today's Topics:
1. Re: AMSAT-BB Digest, Vol 4, Issue 294 (claryco@xxx.xxxx
2. Re: Field Day Call Signs (Gail A Mcdaniel)
3. Re: Field Day Call Signs (Gary "Joe" Mayfield)
4. Re: Powering a UHF mast mound LNA from a TS2000 (Stan W1LE)
5. Field Day Call Sign (Richard Allen)
6. Field Day Call Sign (Rick)
7. Re: Field Day Call Sign (Ben Jackson)
8. Field Day Call Sign (Gary Bargholz)
9. Hudson Valley Satcom Group Net Tonight June 25 At 8PM
Echolink node n2eyh-L (Cotejaune2@xxx.xxxx
10. AMSAT Contact (Clint Bradford)
11. Re: Powering a UHF mast mound LNA from a TS2000 (Sebastian)
----------------------------------------------------------------------
Message: 1
Date: Thu, 25 Jun 2009 06:00:41 -0400
From: claryco@xxx.xxx
Subject: [amsat-bb] Re: AMSAT-BB Digest, Vol 4, Issue 294
To: amsat-bb@xxxxx.xxx
Message-ID: <8CBC392EE971701-1560-CC@xxxxxxxxxxxx.xxxxxx.xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Frank,
I'll be returning to Diego Garcia (VQ9, Grid MI62) in August and expect to set
up shop on the FM and linear birds shortly thereafter. With AO7's footprint,
we should have a shot at making a go of it as well.
73,
Jim, ND9M / VQ9JC
Date: Thu, 25 Jun 2009 19:02:37 +0930
From: "Frank Woolfe" <frankwoolfe@xxxxxxxx.xxx.xx>
Subject: [amsat-bb]? Looking? for AO7 Contacts
To: <amsat-bb@xxxxx.xxx>
Message-ID: <200906250932.n5P9WiQw013797@xxxxxx.xxx.xxxxxxxx.xxx.xx>
Content-Type: text/plain;?? charset="us-ascii"
Looking for possible Contacts from Stations on AO7 in Indonesia,
Philippines, Japan, Malaya etc; CQ zones 26,27,28,29,30, VK Stations are
always listening mainly Mode B and center of the passband.
Frank VK5KV
------------------------------
Message: 2
Date: Thu, 25 Jun 2009 04:22:45 -0700 (PDT)
From: Gail A Mcdaniel <gmcdanl@xxxxxxxxx.xxx>
Subject: [amsat-bb] Re: Field Day Call Signs
To: amsat-bb@xxxxx.xxx
Message-ID: <95674.32079.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
W0RR - Heart of American Radio Club, Kansas City, MO
Gail McDaniel
KB0RZD
------------------------------
Message: 3
Date: Thu, 25 Jun 2009 06:58:06 -0500
From: "Gary \"Joe\" Mayfield" <gary_mayfield@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Field Day Call Signs
To: <n3tl@xxxxxxxxx.xxx>, <AMSAT-BB@xxxxx.xxx>
Message-ID: <COL0-DAV26EB456E6C67C8F14578788A340@xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
W0WTN
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of n3tl@xxxxxxxxx.xxx
Sent: Wednesday, June 24, 2009 7:14 AM
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] Field Day Call Signs
Hey everyone,
How about posting the call sign you'll be using over Field Day weekend for
satellite contacts?
Here, I'll be providing the satellite station for the combined FD effort of
the Athens Amateur Radio Club and the Northeast Georgia ARC, and they have
obtained the special 1x1 call W4G for Field Day.
I know many of us will be using club calls over Field Day, and I'm
interested in know "who will be who" this weekend.
I'm also interested in CW contacts on AO-7, FO-29 and VO-52, so I hope those
of you who will be working those three will bring a key or paddle along. If
you do, please listen for W4G a few kHz below the middles of theses
satellites' passbands.
73 to all, and enjoy Field Day!
Tim - N3TL
Athens, Ga. - EM84ha
W4G for Field Day 2009
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 4
Date: Thu, 25 Jun 2009 08:54:12 -0400
From: Stan W1LE <stanw1le@xxxxxxx.xxx>
Subject: [amsat-bb] Re: Powering a UHF mast mound LNA from a TS2000
To: Pieter Kotze <PKotze@xxxx.xx.xx>
Cc: amsat-bb@xxxxx.xxx
Message-ID: <4A437374.1030102@xxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hello Piet,
The real question to ask is what the current draw of the ARR mast mounted
preamplifier with internal relays will be, and if the Kenwood TS-2000
can source that current.
Others can comment as to the Kenwood's capability, but you can measure
the current draw of the ARR.
I suspect the Kenwood may not be rated for that current and either an
external DC injector is needed to put DC on the coax or other wiring
direct to the ARR is needed.
A sequencer could be used to source the current and under MIC PTT control
would properly turn it off during TX.
Stan, W1LE Cape Cod FN41sr
Pieter Kotze wrote:
> Does the Kenwood have a inline 12V power supply option like the Icom 821? I
can't seem to find it? Or do I need to connect a separate power lead to my
ARR mastmount amp?
>
> 73
> Pieter
> ZS1PK/M0PAK
>
>
------------------------------
Message: 5
Date: Thu, 25 Jun 2009 06:50:42 -0500
From: Richard Allen <rallen@xxxxxxxxxxx.xxx>
Subject: [amsat-bb] Field Day Call Sign
To: amsat-bb@xxxxx.xxx
Message-ID: <4A436492.7000105@xxxxxxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I'll be operating as *W0YI* - Story County Amateur Radio Club, Ames, Iowa at
Iowa State University.
Rick Allen
N0CFL
------------------------------
Message: 6
Date: Thu, 25 Jun 2009 07:16:24 -0500
From: Rick <rick.n0cfl@xxxxx.xxx>
Subject: [amsat-bb] Field Day Call Sign
To: amsat-bb@xxxxx.xxx
Message-ID: <4A436A98.4010306@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I'll be operating as *W0YI* - Story County Amateur Radio Club, Ames, Iowa at
Iowa State University.
Sorry if I have duplicated this email but I tried to post before and it did
not go...
73,
Rick Allen
N0CFL
------------------------------
Message: 7
Date: Thu, 25 Jun 2009 10:22:02 -0400
From: Ben Jackson <bbj@xxxxxxxx.xxx>
Subject: [amsat-bb] Re: Field Day Call Sign
To: amsat-bb@xxxxx.xxx
Message-ID: <4A43880A.4070607@xxxxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I'll be operating W1AEC Sunday morning and hope to get on some on the FM
birds.
- --
Ben Jackson - N1WBV - New Bedford, MA
bbj <at> innismir.net - http://www.innismir.net/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iQEcBAEBAgAGBQJKQ4gKAAoJEAQiWVsfSvVvyDoIAJNtFEIyVjC2miQ+3ho0fj9O
d8s7BnfmsTxAKfhTgIqnBcO8PcObXr/AwxXb836twZOumlPatXqYwXOlpDv4eZPT
ySulWhtjwjcCMCjoD61GY4qU4gs98i5200+f64iN4jL32uJeP3xoOSboPjz07WeA
LpvxJZENwf80ap0ar+HHcxHzCzSm8Vb8THRQ+HB1vUSU7TI2V4Wo37a6QoJkxE0i
Dcb8aD6sFGop30vB1Eeiz1gdVSFJJlnZy6/AiIkRWojJgyJz7qTnyudY8KJmQeXa
k0iUlJ9OVshpo57kK7Q7xLeJV8eia+JNIm5bmEZulfdU6la14BGf7TsO5SSCWaw=
=xne3
-----END PGP SIGNATURE-----
------------------------------
Message: 8
Date: Thu, 25 Jun 2009 09:50:19 -0500
From: "Gary Bargholz" <N9UUR@xx.xx.xxx>
Subject: [amsat-bb] Field Day Call Sign
To: amsat-bb@xxxxx.xxx
Message-ID: <4A43485B.15275.11AE00EB@xxxxx.xx.xx.xxx>
Content-Type: text/plain; charset=US-ASCII
After taking a year off last year...
Wisconsin Nine Lousy Operator W9LO
Will be back again...
Gary - N9UUR
------------------------------
Message: 9
Date: Thu, 25 Jun 2009 10:58:44 EDT
From: Cotejaune2@xxx.xxx
Subject: [amsat-bb] Hudson Valley Satcom Group Net Tonight June 25 At
8PM Echolink node n2eyh-L
To: amsat-bb@xxxxx.xxx
Message-ID: <cee.5c82870b.3774eaa4@xxx.xxx>
Content-Type: text/plain; charset="US-ASCII"
Hello all. It's time again for The Hudson Valley Satcom Group Net. You can
check-in on Echolink n2eyh-L.Or if you are in the Hudson Valley area on the
Mt. Beacon repeater on 146.970 pl100. Please join us. The Net will be
celebrating it's third anniversary in September. We usually have one or two
Amsat
area coordinators on the net two answer any of your questions. Hope to hear
you there tonight at 8PM EDT.
73
Gary
**************Make your summer sizzle with fast and easy recipes for the
grill. (http://food.aol.com/grilling?ncid=emlcntusfood00000005)
------------------------------
Message: 10
Date: Thu, 25 Jun 2009 08:23:11 -0700 (GMT-07:00)
From: Clint Bradford <clintbrad4d@xxxxxxxxx.xxx>
Subject: [amsat-bb] AMSAT Contact
To: amsat-bb@xxxxx.xxxx amsat-bb@xxxxx.xxx
Message-ID:
<5691562.1245943391979.JavaMail.root@xxxxxxxxxxxxxxxx.xxx.xx.xxxxxxxxx.x
xx>
Content-Type: text/plain; charset=UTF-8
Which AMSAT member should I contact regarding a CubeSat construction inquiry?
Clint, K6LCS
909-241-7666
----------------------------------
Clint Bradford, K6LCS
http://www.clintbradford.com
------------------------------
Message: 11
Date: Thu, 25 Jun 2009 12:19:52 -0400
From: Sebastian <w4as@xxxxxxxxx.xxx>
Subject: [amsat-bb] Re: Powering a UHF mast mound LNA from a TS2000
To: AMSAT BB <AMSAT-BB@xxxxx.xxx>
Message-ID: <ECF230A7-4926-4B9A-9DA4-B54A11FDFC6F@xxxxxxxxx.xxx>
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
The quick answer is that unfortunately, the Kenwood TS-2000 doesn't
have the ability to send 12 volts to external amplifiers via the coax
line; if that is what you are asking.
73 de W4AS
Sebastian
On Jun 25, 2009, at 8:54 AM, Stan W1LE wrote:
> Hello Piet,
>
> The real question to ask is what the current draw of the ARR mast
> mounted
> preamplifier with internal relays will be, and if the Kenwood TS-2000
> can source that current.
>
> Others can comment as to the Kenwood's capability, but you can measure
> the current draw of the ARR.
>
> I suspect the Kenwood may not be rated for that current and either an
> external DC injector is needed to put DC on the coax or other wiring
> direct to the ARR is needed.
>
> A sequencer could be used to source the current and under MIC PTT
> control
> would properly turn it off during TX.
>
> Stan, W1LE Cape Cod FN41sr
>
>
> Pieter Kotze wrote:
>> Does the Kenwood have a inline 12V power supply option like the
>> Icom 821? I can't seem to find it? Or do I need to connect a
>> separate power lead to my ARR mastmount amp?
>>
>> 73
>> Pieter
>> ZS1PK/M0PAK
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 4, Issue 295
****************************************
Read previous mail | Read next mail
| |
