| |
CX2SA > SATDIG 19.04.09 23:48l 340 Lines 10271 Bytes #999 (0) @ WW
BID : 26788-CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V4 187
Path: IZ3LSV<IK2XDE<DB0RES<DK0WUE<7M3TJZ<HG8LXL<CX2SA
Sent: 090419/2135Z @:CX2SA.LAV.URY.SA #:26788 [Minas] FBB7.00e $:26788-CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Send AMSAT-BB mailing list submissions to
amsat-bb@xxxxx.xxx
To subscribe or unsubscribe via the World Wide Web, visit
http://amsat.org/mailman/listinfo/amsat-bb
or, via email, send a message with subject or body 'help' to
amsat-bb-request@xxxxx.xxx
You can reach the person managing the list at
amsat-bb-owner@xxxxx.xxx
When replying, please edit your Subject line so it is more specific
than "Re: Contents of AMSAT-BB digest..."
Today's Topics:
1. Re: Tuning (Glen Zook)
2. OT Rotator Yaesu G-5400B (Vincenzo Mone)
3. Re: OT Rotator Yaesu G-5400B (Don Roland)
4. Re: OT Rotator Yaesu G-5400B (Nigel Gunn G8IFF/W8IFF)
5. G5500 Locked Full CW Both Axis (Ron Miles)
6. OT reply to Don Roland (Vincenzo Mone)
----------------------------------------------------------------------
Message: 1
Date: Sun, 19 Apr 2009 07:57:17 -0700 (PDT)
From: Glen Zook <gzook@xxxxx.xxx>
Subject: [amsat-bb] Re: Tuning
To: "'James Duffey'" <JamesDuffey@xxxxxxx.xxx>, "'Jerry Felts'"
<nr5ajerry@xxxxx.xxx>, kc6uqh@xxx.xxx
Cc: 'Amsat BB' <amsat-bb@xxxxx.xxx>
Message-ID: <674563.55865.qm@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Back in the "goode olde dayes", when OSCAR VI and OSCAR VII were the only 2
satellites available, the general consensus was not to try to compensate for
Doppler by moving the transmit frequency. Since everyone knew that Doppler
would affect the downlink frequency we just kept a hand on the receiver and
manually compensated for the Doppler shift. Trying to compensate for the
Doppler by changing the transmit frequency only complicated things even more.
Also, having a fixed elevation of around 30 degrees on the antenna generally
took care of the need for an elevation rotor. Yes, if you had an elevation
rotor you could often extend the coverage by between 10 and 20 percent. But,
for those who did not have an elevation rotor fixing the antennas at around 30
degrees above the horizontal worked pretty darn well.
Glen, K9STH
AMSAT 239/LM 463
Website: http://k9sth.com
--- On Sat, 4/18/09, Art McBride <kc6uqh@xxx.xxx> wrote:
For the linear transponder Satellites I have found with my IC 820H using the
main tuning dial to adjust receive and switching that side and adjust for
transmit works the best during Field Day operations. The I-Com is just to
clumsy to use the sub receiver, RIT does not have enough range, no easy way to
adjust the offset, transmit power, ETC. I calculate the offset VS time using
Instant Track in advance and work off of paper data. I set the elevation of
the mast to match the pass and a single rotator performs both elevation and
azimuth functions.
------------------------------
Message: 2
Date: Sun, 19 Apr 2009 18:51:10 +0200
From: "Vincenzo Mone" <vimone@xxxxx.xx>
Subject: [amsat-bb] OT Rotator Yaesu G-5400B
To: "Amsat - BBs" <amsat-bb@xxxxx.xxx>
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAALgqrd2N1rRAiaQvRd7pgRDCgAAAEAAAADMpUNAUwHBPkLSC
oWZEFtIBAAAAAA==@xxxxx.xx>
Content-Type: text/plain; charset="us-ascii"
Hi Folks,
sorry for the OT message.
I own the rotator Yaesu G-5400B which are an Azimuth and elevation rotators.
I had enclosed with the pack when I bought it an "L" bracket.
Unfortunately due to maintenance I have lost the Bracket.
Please is there anybody which own one and can pass me all the measures So I
can build a new one? I need the measures of the "L" bracket and the right
Positions of the holes to fix the two rotators.
Any help will be really appreciated.
Thanks in advance
Salve alla lista,
Scusatemi per il messaggio OT.
Sono in possesso del Rotore G-5400B il quale sono due rotori Uno per
l'Azimuth
E l'altro per l'Elevazione.
Il Rotore e' stato acquistato nel lontano 1990 ed incluso trovai una staffa
Ad "L" per poter unire i due rotori. A causa di manutenzione sul parco
antenne,
ho perso la staffa e vorrei farne uno nuovo.
C'e' qualcuno che ha lo stesso rotore e di conseguenza la stessa staffa il
quale
Potrebbe passarmi le misure per poterlo ricostruire?
Ho bisogno delle misure di tutte le parti della staffa incluso le varie
distanze
Tra i fori di fissaggio dei due rotori.
Ringrazio anticipatamente.
73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
***************************************
***** GSM +39 338 9749786 *****
***** SMS +39 338 9749786 *****
***** FAX +39 328 7244294 *****
*** 2nd e-mail: vimone@xxx.xx ***
***************************************
------------------------------
Message: 3
Date: Sun, 19 Apr 2009 14:37:33 -0300
From: "Don Roland" <dmroland@xx.xxxxx.xxx>
Subject: [amsat-bb] Re: OT Rotator Yaesu G-5400B
To: "Vincenzo Mone" <vimone@xxxxx.xx>, "Amsat - BBs"
<amsat-bb@xxxxx.xxx>
Message-ID: <001201c9c115$9d09a9e0$b016ba89@xxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
Hello Vincenzo,
I have sent you direct emails previously with no response.
I have the "L" bracket here and can give you any measurements
that you need.
73 Don -VE1AOE-
----- Original Message -----
From: "Vincenzo Mone" <vimone@xxxxx.xx>
To: "Amsat - BBs" <amsat-bb@xxxxx.xxx>
Sent: Sunday, April 19, 2009 1:51 PM
Subject: [amsat-bb] OT Rotator Yaesu G-5400B
> Hi Folks,
> sorry for the OT message.
> I own the rotator Yaesu G-5400B which are an Azimuth and elevation
rotators.
>
> I had enclosed with the pack when I bought it an "L" bracket.
> Unfortunately due to maintenance I have lost the Bracket.
> Please is there anybody which own one and can pass me all the measures So
I
> can build a new one? I need the measures of the "L" bracket and the right
> Positions of the holes to fix the two rotators.
> Any help will be really appreciated.
> Thanks in advance
>
>
>
> Salve alla lista,
> Scusatemi per il messaggio OT.
> Sono in possesso del Rotore G-5400B il quale sono due rotori Uno per
> l'Azimuth
> E l'altro per l'Elevazione.
> Il Rotore e' stato acquistato nel lontano 1990 ed incluso trovai una
staffa
> Ad "L" per poter unire i due rotori. A causa di manutenzione sul parco
> antenne,
> ho perso la staffa e vorrei farne uno nuovo.
> C'e' qualcuno che ha lo stesso rotore e di conseguenza la stessa staffa il
> quale
> Potrebbe passarmi le misure per poterlo ricostruire?
> Ho bisogno delle misure di tutte le parti della staffa incluso le varie
> distanze
> Tra i fori di fissaggio dei due rotori.
> Ringrazio anticipatamente.
>
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
> ***************************************
> ***** GSM +39 338 9749786 *****
> ***** SMS +39 338 9749786 *****
> ***** FAX +39 328 7244294 *****
> *** 2nd e-mail: vimone@xxx.xx ***
> ***************************************
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 4
Date: Sun, 19 Apr 2009 17:42:58 +0000
From: Nigel Gunn G8IFF/W8IFF <nigel@xxxxx.xxx>
Subject: [amsat-bb] Re: OT Rotator Yaesu G-5400B
To: Don Roland <dmroland@xx.xxxxx.xxx>
Cc: Vincenzo Mone <vimone@xxxxx.xx>, Amsat - BBs <amsat-bb@xxxxx.xxx>
Message-ID: <49EB62A2.5070507@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Or you can get a replacement from your local Yaesu dealer.
Don Roland wrote:
> Hello Vincenzo,
>
> I have sent you direct emails previously with no response.
> I have the "L" bracket here and can give you any measurements
> that you need.
------------------------------
Message: 5
Date: Sun, 19 Apr 2009 10:47:01 -0700
From: Ron Miles <conimicut@xxxxx.xxx>
Subject: [amsat-bb] G5500 Locked Full CW Both Axis
To: amsat-bb@xxxxx.xxx
Message-ID:
<ca0df3900904191047j4ec1690euacfdc17d5810d4ab@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
My fellow AMSATers: Both AZ and EL rotors have traveled to their full
CW limit and seem to be locked and can not be budged. The control
unit indicates full scale for each rotor, the control unit fuse is good. I
would appreciate suggestions as to resolving a bad situation. Sorry if this
is OT but I miss my friends on AO-51 L/US and V/S modes, ISS, FO's VO's.
Well, you know what I mean.
Thanks much, 73
Ron n6paa
AMSAT #23760
------------------------------
Message: 6
Date: Sun, 19 Apr 2009 20:23:32 +0200
From: "Vincenzo Mone" <vimone@xxxxx.xx>
Subject: [amsat-bb] OT reply to Don Roland
To: "Amsat - BBs" <amsat-bb@xxxxx.xxx>
Message-ID:
<!&!AAAAAAAAAAAYAAAAAAAAALgqrd2N1rRAiaQvRd7pgRDCgAAAEAAAAEMMxouhWINInwTy
aoSbM4UBAAAAAA==@xxxxx.xx>
Content-Type: text/plain; charset="us-ascii"
Sorry guy, for the OT message but I do not have the email address
Of Don.
Hi Don,
I just saw this message that Nigel has sent me.
"Or you can get a replacement from your local Yaesu dealer.
Don Roland wrote:
> Hello Vincenzo,
>
> I have sent you direct emails previously with no response.
> I have the "L" bracket here and can give you any measurements that you
> need."
Unfortunately I did not receive your reply or maybe I have deleted it for
mistake.
Please apologize and if you can re send me the message.
I still need all the details and Photos of the "L" Bracket.
Thanks
73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
***************************************
***** GSM +39 338 9749786 *****
***** SMS +39 338 9749786 *****
***** FAX +39 328 7244294 *****
*** 2nd e-mail: vimone@xxx.xx ***
***************************************
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 4, Issue 187
****************************************
Read previous mail | Read next mail
| |
