|
CX2SA > SATDIG 31.01.20 04:51l 974 Lines 34152 Bytes #999 (0) @ WW
BID : AMSATBB1523
Read: GUEST
Subj: AMSAT-BB-digest V15 23
Path: IZ3LSV<ED1ZAC<CX2SA
Sent: 200130/2258Z @:CX2SA.SAL.URY.SOAM #:24038 [Salto] FBB7.00e $:AMSATBB1523
From: CX2SA@CX2SA.SAL.URY.SOAM
To : SATDIG@WW
Today's Topics:
1. Re: Error accessing FunCube Pro from FoxTelem (Paul Stoetzer)
2. AMSAT-LU Buoy Jan-30 (Amsat Argentina)
3. Can sat32 run on a raspberry? (James Brown)
4. Re: Can sat32 run on a raspberry? (Paul Stoetzer)
5. Re: Error accessing FunCube Pro from FoxTelem (Chris Thompson)
6. Re: Crew packing Cygnus for departure (and launch of
HuskySat) (Chris Thompson)
7. Re: Crew packing Cygnus for departure (and launch of
HuskySat) (John Brier)
8. Re: Error accessing FunCube Pro from FoxTelem (Joseph Armbruster)
9. Help with USB to serial interface to Kenwood TX-200X (Rick Walter)
10. CONTINUATION OF HELP WITH USB TO SERIAL CONTROL OF KENWOOD
(Rick Walter)
11. Re: Error accessing FunCube Pro from FoxTelem (Joseph Armbruster)
----------------------------------------------------------------------
Message: 1
Date: Wed, 29 Jan 2020 12:11:49 -0500
From: Paul Stoetzer <n8hm@????.???>
To: Joseph Armbruster <josepharmbruster@?????.???>
Cc: Amsat BB <amsat-bb@?????.???>, "Stephen E. Belter"
<seb@??????.???>
Subject: Re: [amsat-bb] Error accessing FunCube Pro from FoxTelem
Message-ID:
<CABzOSOoe+yH8FSLuE___SNN5jaGg8OpuxrnQMKhC_PsxvfFgQg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
The GitHub repository is at
https://github.com/ac2cz/FoxTelem
73,
Paul, N8HM
On Wed, Jan 29, 2020 at 12:09 Joseph Armbruster via AMSAT-BB <
amsat-bb@?????.???> wrote:
> Stephen,
>
> If someone shoots me a link to the foxtelem code, I'll gladly help debug
> it. I have a Funcube dongle Pro here I can use.
>
> Joseph Armbruster
>
>
> On Wed, Jan 29, 2020 at 7:30 AM Stephen E. Belter <seb@??????.???> wrote:
>
> > Joe,
> >
> > I believe the FUNcube dongle uses *two* virtual USB interfaces over the
> > single physical USB port. The IQ stream looks like a standard sound card
> > and is one of the virtual USB interfaces.
> >
> > The control functions like frequency, preamp gain, etc., use the standard
> > HID (Human Interface Device) interface, USB-HID.
> >
> > Jim's problem is unusual, but I have the same problem with FoxTelem on my
> > Windows 10 machines. I haven't discovered a solution, yet.
> >
> > 73, Steve N9IP
> > --
> > Steve Belter, seb@??????.???
> >
> >
> > ?On 1/28/20, 10:00 PM, "AMSAT-BB on behalf of Joseph Armbruster via
> > AMSAT-BB" <amsat-bb-bounces@?????.??? on behalf of amsat-bb@?????.???>
> > wrote:
> >
> > Lib USB!? I thought Howard told me at the symposium (circa 2008) that
> > they
> > were using usb-hid ?!?!?
> >
> > Howard...? Or was that on the hardware-side?
> >
> > Joseph Armbruster
> > KJ4JIO
> >
> > On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB <
> > amsat-bb@?????.???> wrote:
> >
> > > Good Evening!
> > > While attempting to use my FunCube Pro directly from FoxTelem I get
> > an
> > > error:
> > > LIBUSB_ERROR_NOT_FOUND. An internet search has found mentions of
> > the
> > > error but no solutions for my situation. I am using Windows 10 for
> > the
> > > OS on my comupter. Any thoughts or suggestions ??
> > >
> > > By the way, I use SDRConsole and feed the audio via VB_Audio
> Virtual
> > > Cable with GREAT results. I even have RSDConsole with WispDDE
> > running
> > > the antenna rotor controller. I thought I would try the direct
> feed
> > > FoxTelem- to-FunCube before I set up My Raspberry Pi for
> > "Fox-in-a-Box"
> > >
> > > One last question, while I'm here: Is there any way FoxTelem
> without
> > > SDRConsol, with a DDE program , could run the rotor controller?
> > >
> > > Thank you for you help.
> > >
> > > Jim Jipping, W8MRR
> > > AMSAT # 5512
> > > _______________________________________________
> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> > available
> > > to all interested persons worldwide without requiring membership.
> > Opinions
> > > expressed
> > > are solely those of the author, and do not reflect the official
> > views of
> > > AMSAT-NA.
> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > > Subscription settings:
> > https://www.amsat.org/mailman/listinfo/amsat-bb
> > >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> available
> > to all interested persons worldwide without requiring membership.
> > Opinions expressed
> > are solely those of the author, and do not reflect the official views
> > of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> >
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Wed, 29 Jan 2020 18:09:29 +0000 (UTC)
From: Amsat Argentina <lu7aa@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] AMSAT-LU Buoy Jan-30
Message-ID: <2067446282.1052950.1580321369608@????.?????.???>
Content-Type: text/plain; charset=UTF-8
On Jan-30 14:00z AMSAT Argentina will deploy a WSPR/APRS drifting Buoy on
South Atlantic Seas.
Release will be 100 Km. offshore Mar del Plata coast, seeking west aiming
currents/winds.
Callsign: LU7AA. Details & photos: http://amsat.org.ar?f=buoy
Objective: Sea currents tracking & HF/VHF/SAT QRPp propagation tests.
Will appreciate WSPR stations receiving/reporting 20m.
73, LU7AA, AMSAT Argentina
------------------------------
Message: 3
Date: Wed, 29 Jan 2020 20:54:54 +0000 (UTC)
From: James Brown <ki6wj@?????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: [amsat-bb] Can sat32 run on a raspberry?
Message-ID: <1338999891.1041284.1580331294326@????.?????.???>
Content-Type: text/plain; charset=UTF-8
Sent from Yahoo Mail on Android
------------------------------
Message: 4
Date: Wed, 29 Jan 2020 15:59:29 -0500
From: Paul Stoetzer <n8hm@????.???>
To: "ki6wj@?????.???? <ki6wj@?????.???>
Cc: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Can sat32 run on a raspberry?
Message-ID:
<CABzOSOo4OikwYUTmi2Cv51dYUkPWdJTFMkjYZe9nOk0-puMFDA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Short answer: No. You should use Gpredict instead.
Long answer: Maybe, using Pi386 and Wine, but getting that configured
would not be easy.
73,
Paul, N8HM
On Wed, Jan 29, 2020 at 3:55 PM James Brown via AMSAT-BB
<amsat-bb@?????.???> wrote:
>
>
>
> Sent from Yahoo Mail on Android
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 5
Date: Thu, 30 Jan 2020 09:58:21 -0500
From: Chris Thompson <g0kla@????.???>
To: Joseph Armbruster <josepharmbruster@?????.???>
Cc: Amsat BB <amsat-bb@?????.???>, "Stephen E. Belter"
<seb@??????.???>
Subject: Re: [amsat-bb] Error accessing FunCube Pro from FoxTelem
Message-ID:
<CAJOf0+tcXFAmbN8dcQmzYU4HBZU5eDQp+ut5WKZO92Gs3Yg6wA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
A couple of people sent out the git repo URL. If you have time to look at
this, that would be great. It's not an area where I am a deep expert. The
FCD has two USB interfaces, as noted. The Soundcard interface uses
standard Audio IO APIs and works fine. USB access is transparent and you
don't need to worry about it. But the HID interface has been difficult.
It was a great idea to not need any libraries, but the flip side issue is
that every platform has its own libraries. Writing a single application
that works on the PI (ARM), Linux (x86), Mac, Windows has been difficult in
this area. The HID approach is great for the end user, difficult for the
developer.
I've used three different libraries so far. I started with direct Java
wrapping of the C libraries. It worked to a degree in Windows, but I
struggled on other platforms. I moved to the PureJavaHID library and that
worked across platforms. But it holds the connection so only one program
could connect to the device. It did not play well with the Funcube
Dashboard for example. And it had issues where commands would not be
sent. I'm now using usb4Java which wraps LibUSB. I understand you can
talk HID through LibUSB, which is just a lower level library. But I could
be wrong. I leveraged code that Denis Sheirer wrote for SDRTRunk. But
that also has strange difficult to track down issues, as we can see.
So I am open to a better way to do this that works on all the platforms
people are using. Any help is really appreciated.
73
Chris
On Wed, Jan 29, 2020 at 12:13 PM Joseph Armbruster via AMSAT-BB <
amsat-bb@?????.???> wrote:
> Stephen,
>
> If someone shoots me a link to the foxtelem code, I'll gladly help debug
> it. I have a Funcube dongle Pro here I can use.
>
> Joseph Armbruster
>
>
> On Wed, Jan 29, 2020 at 7:30 AM Stephen E. Belter <seb@??????.???> wrote:
>
> > Joe,
> >
> > I believe the FUNcube dongle uses *two* virtual USB interfaces over the
> > single physical USB port. The IQ stream looks like a standard sound card
> > and is one of the virtual USB interfaces.
> >
> > The control functions like frequency, preamp gain, etc., use the standard
> > HID (Human Interface Device) interface, USB-HID.
> >
> > Jim's problem is unusual, but I have the same problem with FoxTelem on my
> > Windows 10 machines. I haven't discovered a solution, yet.
> >
> > 73, Steve N9IP
> > --
> > Steve Belter, seb@??????.???
> >
> >
> > ?On 1/28/20, 10:00 PM, "AMSAT-BB on behalf of Joseph Armbruster via
> > AMSAT-BB" <amsat-bb-bounces@?????.??? on behalf of amsat-bb@?????.???>
> > wrote:
> >
> > Lib USB!? I thought Howard told me at the symposium (circa 2008) that
> > they
> > were using usb-hid ?!?!?
> >
> > Howard...? Or was that on the hardware-side?
> >
> > Joseph Armbruster
> > KJ4JIO
> >
> > On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB <
> > amsat-bb@?????.???> wrote:
> >
> > > Good Evening!
> > > While attempting to use my FunCube Pro directly from FoxTelem I get
> > an
> > > error:
> > > LIBUSB_ERROR_NOT_FOUND. An internet search has found mentions of
> > the
> > > error but no solutions for my situation. I am using Windows 10 for
> > the
> > > OS on my comupter. Any thoughts or suggestions ??
> > >
> > > By the way, I use SDRConsole and feed the audio via VB_Audio
> Virtual
> > > Cable with GREAT results. I even have RSDConsole with WispDDE
> > running
> > > the antenna rotor controller. I thought I would try the direct
> feed
> > > FoxTelem- to-FunCube before I set up My Raspberry Pi for
> > "Fox-in-a-Box"
> > >
> > > One last question, while I'm here: Is there any way FoxTelem
> without
> > > SDRConsol, with a DDE program , could run the rotor controller?
> > >
> > > Thank you for you help.
> > >
> > > Jim Jipping, W8MRR
> > > AMSAT # 5512
> > > _______________________________________________
> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> > available
> > > to all interested persons worldwide without requiring membership.
> > Opinions
> > > expressed
> > > are solely those of the author, and do not reflect the official
> > views of
> > > AMSAT-NA.
> > > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > > Subscription settings:
> > https://www.amsat.org/mailman/listinfo/amsat-bb
> > >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
> available
> > to all interested persons worldwide without requiring membership.
> > Opinions expressed
> > are solely those of the author, and do not reflect the official views
> > of AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> > program!
> > Subscription settings:
> https://www.amsat.org/mailman/listinfo/amsat-bb
> >
> >
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 6
Date: Thu, 30 Jan 2020 12:26:56 -0500
From: Chris Thompson <g0kla@????.???>
To: Roy Dean <royldean@?????.???>
Cc: AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Crew packing Cygnus for departure (and launch
of HuskySat)
Message-ID:
<CAJOf0+sMxCCs6U0gobzFvFz45aWB+ceiC91xz9i12DBE+WkkFg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
You should not get a spacecraft error. What does the error look like? If
you have an old spacecraft file that has _em in the name, then it is the
old engineering model. You should delete that.
The main change is that you need to be listening on 70cms and the decoder
needs to be set to one of the PSK decoders. You can make it automatically
listen to HuskySat if you check the box "Switch bands and modes". Note
this is the first time we will have tested that, so report any issues you
see. If you are listening to the Fox sats as well, then it would assume
you have a dual band antenna setup, which is not normal for many. I
personally have setup another machine with a separate SDR listening to
70cms. Note that this may work better through a real radio than the Fox
satellites because it does not have the filtering issues for low frequency
audio. So that is an option.
I understand that the KEPS are available and we are trying to see if they
will be published. HuskySat have a facebook page and it may appear there
first.
73
Chris
On Tue, Jan 28, 2020 at 12:36 PM Roy Dean via AMSAT-BB <amsat-bb@?????.???>
wrote:
> Will there be any updates (addiitions) required for FoxTelem to enable
> HuskySat telemetry reception? Currently I get a spacecraft error when I
> try to enable HuskySat (understandable, no TLEs, etc.).
>
> --Roy
> K3RLD
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???
------------------------------
Message: 7
Date: Thu, 30 Jan 2020 12:52:53 -0500
From: John Brier <johnbrier@?????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] Crew packing Cygnus for departure (and launch
of HuskySat)
Message-ID:
<CALn0fKOncR32T=FxKKTskkPUaqsmJ4WbHy+LLxQFGJnzLvuTGw@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Can someone explain why V/u was chosen for the linear Fox (they are all Fox
right?) Over U/v that all the FM Foxes are?
2m SSB TX capability is easier to get than 70cm SSB TX capability maybe?
73, John Brier KG4AKV
On Thu, Jan 30, 2020, 12:32 Chris Thompson via AMSAT-BB <amsat-bb@?????.???>
wrote:
> You should not get a spacecraft error. What does the error look like? If
> you have an old spacecraft file that has _em in the name, then it is the
> old engineering model. You should delete that.
>
> The main change is that you need to be listening on 70cms and the decoder
> needs to be set to one of the PSK decoders. You can make it automatically
> listen to HuskySat if you check the box "Switch bands and modes". Note
> this is the first time we will have tested that, so report any issues you
> see. If you are listening to the Fox sats as well, then it would assume
> you have a dual band antenna setup, which is not normal for many. I
> personally have setup another machine with a separate SDR listening to
> 70cms. Note that this may work better through a real radio than the Fox
> satellites because it does not have the filtering issues for low frequency
> audio. So that is an option.
>
> I understand that the KEPS are available and we are trying to see if they
> will be published. HuskySat have a facebook page and it may appear there
> first.
>
> 73
> Chris
>
> On Tue, Jan 28, 2020 at 12:36 PM Roy Dean via AMSAT-BB <amsat-bb@?????.???
> >
> wrote:
>
> > Will there be any updates (addiitions) required for FoxTelem to enable
> > HuskySat telemetry reception? Currently I get a spacecraft error when I
> > try to enable HuskySat (understandable, no TLEs, etc.).
> >
> > --Roy
> > K3RLD
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 8
Date: Thu, 30 Jan 2020 17:17:25 -0500
From: Joseph Armbruster <josepharmbruster@?????.???>
To: Chris Thompson <g0kla@????.???>
Cc: Amsat BB <amsat-bb@?????.???>, "Stephen E. Belter"
<seb@??????.???>
Subject: Re: [amsat-bb] Error accessing FunCube Pro from FoxTelem
Message-ID:
<CADkz4c-TSMy6rsnWVUGaws-HVYyZaBDwrcuhW5eiWqPymGFhnQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Chris,
What version of the fun cube pro do you have, and does it make a difference
which one is used? I have an older v1.1 that I'm going to connect in a few
(Serial 3354). Pulling the code down now...
Joseph Armbruster
KJ4JIO
On Thu, Jan 30, 2020 at 9:58 AM Chris Thompson <g0kla@????.???> wrote:
> A couple of people sent out the git repo URL. If you have time to look at
> this, that would be great. It's not an area where I am a deep expert. The
> FCD has two USB interfaces, as noted. The Soundcard interface uses
> standard Audio IO APIs and works fine. USB access is transparent and you
> don't need to worry about it. But the HID interface has been difficult.
> It was a great idea to not need any libraries, but the flip side issue is
> that every platform has its own libraries. Writing a single application
> that works on the PI (ARM), Linux (x86), Mac, Windows has been difficult in
> this area. The HID approach is great for the end user, difficult for the
> developer.
>
> I've used three different libraries so far. I started with direct Java
> wrapping of the C libraries. It worked to a degree in Windows, but I
> struggled on other platforms. I moved to the PureJavaHID library and that
> worked across platforms. But it holds the connection so only one program
> could connect to the device. It did not play well with the Funcube
> Dashboard for example. And it had issues where commands would not be
> sent. I'm now using usb4Java which wraps LibUSB. I understand you can
> talk HID through LibUSB, which is just a lower level library. But I could
> be wrong. I leveraged code that Denis Sheirer wrote for SDRTRunk. But
> that also has strange difficult to track down issues, as we can see.
>
> So I am open to a better way to do this that works on all the platforms
> people are using. Any help is really appreciated.
>
> 73
> Chris
>
>
> On Wed, Jan 29, 2020 at 12:13 PM Joseph Armbruster via AMSAT-BB <
> amsat-bb@?????.???> wrote:
>
>> Stephen,
>>
>> If someone shoots me a link to the foxtelem code, I'll gladly help debug
>> it. I have a Funcube dongle Pro here I can use.
>>
>> Joseph Armbruster
>>
>>
>> On Wed, Jan 29, 2020 at 7:30 AM Stephen E. Belter <seb@??????.???> wrote:
>>
>> > Joe,
>> >
>> > I believe the FUNcube dongle uses *two* virtual USB interfaces over the
>> > single physical USB port. The IQ stream looks like a standard sound
>> card
>> > and is one of the virtual USB interfaces.
>> >
>> > The control functions like frequency, preamp gain, etc., use the
>> standard
>> > HID (Human Interface Device) interface, USB-HID.
>> >
>> > Jim's problem is unusual, but I have the same problem with FoxTelem on
>> my
>> > Windows 10 machines. I haven't discovered a solution, yet.
>> >
>> > 73, Steve N9IP
>> > --
>> > Steve Belter, seb@??????.???
>> >
>> >
>> > ?On 1/28/20, 10:00 PM, "AMSAT-BB on behalf of Joseph Armbruster via
>> > AMSAT-BB" <amsat-bb-bounces@?????.??? on behalf of amsat-bb@?????.???>
>> > wrote:
>> >
>> > Lib USB!? I thought Howard told me at the symposium (circa 2008)
>> that
>> > they
>> > were using usb-hid ?!?!?
>> >
>> > Howard...? Or was that on the hardware-side?
>> >
>> > Joseph Armbruster
>> > KJ4JIO
>> >
>> > On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB <
>> > amsat-bb@?????.???> wrote:
>> >
>> > > Good Evening!
>> > > While attempting to use my FunCube Pro directly from FoxTelem I
>> get
>> > an
>> > > error:
>> > > LIBUSB_ERROR_NOT_FOUND. An internet search has found mentions of
>> > the
>> > > error but no solutions for my situation. I am using Windows 10
>> for
>> > the
>> > > OS on my comupter. Any thoughts or suggestions ??
>> > >
>> > > By the way, I use SDRConsole and feed the audio via VB_Audio
>> Virtual
>> > > Cable with GREAT results. I even have RSDConsole with WispDDE
>> > running
>> > > the antenna rotor controller. I thought I would try the direct
>> feed
>> > > FoxTelem- to-FunCube before I set up My Raspberry Pi for
>> > "Fox-in-a-Box"
>> > >
>> > > One last question, while I'm here: Is there any way FoxTelem
>> without
>> > > SDRConsol, with a DDE program , could run the rotor controller?
>> > >
>> > > Thank you for you help.
>> > >
>> > > Jim Jipping, W8MRR
>> > > AMSAT # 5512
>> > > _______________________________________________
>> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
>> > available
>> > > to all interested persons worldwide without requiring membership.
>> > Opinions
>> > > expressed
>> > > are solely those of the author, and do not reflect the official
>> > views of
>> > > AMSAT-NA.
>> > > Not an AMSAT-NA member? Join now to support the amateur satellite
>> > program!
>> > > Subscription settings:
>> > https://www.amsat.org/mailman/listinfo/amsat-bb
>> > >
>> > _______________________________________________
>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
>> available
>> > to all interested persons worldwide without requiring membership.
>> > Opinions expressed
>> > are solely those of the author, and do not reflect the official
>> views
>> > of AMSAT-NA.
>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>> > program!
>> > Subscription settings:
>> https://www.amsat.org/mailman/listinfo/amsat-bb
>> >
>> >
>> >
>> _______________________________________________
>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership.
>> Opinions expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
>
------------------------------
Message: 9
Date: Thu, 30 Jan 2020 17:32:21 -0500
From: Rick Walter <wb3csy@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] Help with USB to serial interface to Kenwood
TX-200X
Message-ID:
<CAJckjgPJV8apVRpxiekARB0dHrtL+NxnA5UihLG-5eUvZqLtzA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I have been using the RASCAL R-KW13PD made by BUX COMM CO for years to
control my Kenwood TS-2000X via satPC32 software to work the birds.I
have been using an HP Windows 7 laptop.
Today, I just finally updated that laptop to Windows 10. Everything
seems to works great since the upgrade. However, when I try using my
normal interface which was always connected to COM 3
--
Sent from Rick's gmail account
------------------------------
Message: 10
Date: Thu, 30 Jan 2020 17:35:41 -0500
From: Rick Walter <wb3csy@?????.???>
To: "amsat-bb@?????.???? <amsat-bb@?????.???>
Subject: [amsat-bb] CONTINUATION OF HELP WITH USB TO SERIAL CONTROL OF
KENWOOD
Message-ID:
<CAJckjgMsmVW9EfS8RQX5cEfcXJyg5+7KZzmDwzZi795+m5i8Yg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
I have been using the RASCAL R-KW13PD made by BUX COMM CO for years to
control my Kenwood TS-2000X via satPC32 software to work the birds.I
have been using an HP Windows 7 laptop.
Today, I just finally updated that laptop to Windows 10. Everything
seems to works great since the upgrade. However, when I try using my
normal interface which was always connected to COM 3, The satPC32
software tells me it can't find the radio on COM3. When I check the
device manager is claims the device is working. Any ideas? Thank you.
73,
Rick - WB3CSY
--
Sent from Rick's gmail account
------------------------------
Message: 11
Date: Thu, 30 Jan 2020 17:45:00 -0500
From: Joseph Armbruster <josepharmbruster@?????.???>
To: Chris Thompson <g0kla@????.???>
Cc: Amsat BB <amsat-bb@?????.???>, "Stephen E. Belter"
<seb@??????.???>
Subject: Re: [amsat-bb] Error accessing FunCube Pro from FoxTelem
Message-ID:
<CADkz4c8nNV4MkRWeHbg=EimzH4paAF5zcb5r_JUTAg1hMjPiSg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"
Chris,
There's a predict4java source folder and a predict4java.jar?
Which is the correct one to use? :-)
Joseph Armbruster
On Thu, Jan 30, 2020 at 5:17 PM Joseph Armbruster <
josepharmbruster@?????.???> wrote:
> Chris,
>
> What version of the fun cube pro do you have, and does it make a
> difference which one is used? I have an older v1.1 that I'm going to
> connect in a few (Serial 3354). Pulling the code down now...
>
> Joseph Armbruster
> KJ4JIO
>
> On Thu, Jan 30, 2020 at 9:58 AM Chris Thompson <g0kla@????.???> wrote:
>
>> A couple of people sent out the git repo URL. If you have time to look
>> at this, that would be great. It's not an area where I am a deep expert.
>> The FCD has two USB interfaces, as noted. The Soundcard interface uses
>> standard Audio IO APIs and works fine. USB access is transparent and you
>> don't need to worry about it. But the HID interface has been difficult.
>> It was a great idea to not need any libraries, but the flip side issue is
>> that every platform has its own libraries. Writing a single application
>> that works on the PI (ARM), Linux (x86), Mac, Windows has been difficult in
>> this area. The HID approach is great for the end user, difficult for the
>> developer.
>>
>> I've used three different libraries so far. I started with direct Java
>> wrapping of the C libraries. It worked to a degree in Windows, but I
>> struggled on other platforms. I moved to the PureJavaHID library and that
>> worked across platforms. But it holds the connection so only one program
>> could connect to the device. It did not play well with the Funcube
>> Dashboard for example. And it had issues where commands would not be
>> sent. I'm now using usb4Java which wraps LibUSB. I understand you can
>> talk HID through LibUSB, which is just a lower level library. But I could
>> be wrong. I leveraged code that Denis Sheirer wrote for SDRTRunk. But
>> that also has strange difficult to track down issues, as we can see.
>>
>> So I am open to a better way to do this that works on all the platforms
>> people are using. Any help is really appreciated.
>>
>> 73
>> Chris
>>
>>
>> On Wed, Jan 29, 2020 at 12:13 PM Joseph Armbruster via AMSAT-BB <
>> amsat-bb@?????.???> wrote:
>>
>>> Stephen,
>>>
>>> If someone shoots me a link to the foxtelem code, I'll gladly help debug
>>> it. I have a Funcube dongle Pro here I can use.
>>>
>>> Joseph Armbruster
>>>
>>>
>>> On Wed, Jan 29, 2020 at 7:30 AM Stephen E. Belter <seb@??????.???>
>>> wrote:
>>>
>>> > Joe,
>>> >
>>> > I believe the FUNcube dongle uses *two* virtual USB interfaces over the
>>> > single physical USB port. The IQ stream looks like a standard sound
>>> card
>>> > and is one of the virtual USB interfaces.
>>> >
>>> > The control functions like frequency, preamp gain, etc., use the
>>> standard
>>> > HID (Human Interface Device) interface, USB-HID.
>>> >
>>> > Jim's problem is unusual, but I have the same problem with FoxTelem on
>>> my
>>> > Windows 10 machines. I haven't discovered a solution, yet.
>>> >
>>> > 73, Steve N9IP
>>> > --
>>> > Steve Belter, seb@??????.???
>>> >
>>> >
>>> > ?On 1/28/20, 10:00 PM, "AMSAT-BB on behalf of Joseph Armbruster via
>>> > AMSAT-BB" <amsat-bb-bounces@?????.??? on behalf of amsat-bb@?????.???>
>>> > wrote:
>>> >
>>> > Lib USB!? I thought Howard told me at the symposium (circa 2008)
>>> that
>>> > they
>>> > were using usb-hid ?!?!?
>>> >
>>> > Howard...? Or was that on the hardware-side?
>>> >
>>> > Joseph Armbruster
>>> > KJ4JIO
>>> >
>>> > On Tue, Jan 28, 2020 at 9:27 PM James Jipping via AMSAT-BB <
>>> > amsat-bb@?????.???> wrote:
>>> >
>>> > > Good Evening!
>>> > > While attempting to use my FunCube Pro directly from FoxTelem I
>>> get
>>> > an
>>> > > error:
>>> > > LIBUSB_ERROR_NOT_FOUND. An internet search has found mentions
>>> of
>>> > the
>>> > > error but no solutions for my situation. I am using Windows 10
>>> for
>>> > the
>>> > > OS on my comupter. Any thoughts or suggestions ??
>>> > >
>>> > > By the way, I use SDRConsole and feed the audio via VB_Audio
>>> Virtual
>>> > > Cable with GREAT results. I even have RSDConsole with WispDDE
>>> > running
>>> > > the antenna rotor controller. I thought I would try the direct
>>> feed
>>> > > FoxTelem- to-FunCube before I set up My Raspberry Pi for
>>> > "Fox-in-a-Box"
>>> > >
>>> > > One last question, while I'm here: Is there any way FoxTelem
>>> without
>>> > > SDRConsol, with a DDE program , could run the rotor controller?
>>> > >
>>> > > Thank you for you help.
>>> > >
>>> > > Jim Jipping, W8MRR
>>> > > AMSAT # 5512
>>> > > _______________________________________________
>>> > > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
>>> > available
>>> > > to all interested persons worldwide without requiring membership.
>>> > Opinions
>>> > > expressed
>>> > > are solely those of the author, and do not reflect the official
>>> > views of
>>> > > AMSAT-NA.
>>> > > Not an AMSAT-NA member? Join now to support the amateur satellite
>>> > program!
>>> > > Subscription settings:
>>> > https://www.amsat.org/mailman/listinfo/amsat-bb
>>> > >
>>> > _______________________________________________
>>> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum
>>> available
>>> > to all interested persons worldwide without requiring membership.
>>> > Opinions expressed
>>> > are solely those of the author, and do not reflect the official
>>> views
>>> > of AMSAT-NA.
>>> > Not an AMSAT-NA member? Join now to support the amateur satellite
>>> > program!
>>> > Subscription settings:
>>> https://www.amsat.org/mailman/listinfo/amsat-bb
>>> >
>>> >
>>> >
>>> _______________________________________________
>>> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
>>> to all interested persons worldwide without requiring membership.
>>> Opinions expressed
>>> are solely those of the author, and do not reflect the official views of
>>> AMSAT-NA.
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>>> program!
>>> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
>>>
>>
>>
>> --
>> Chris E. Thompson
>> chrisethompson@?????.???
>> g0kla@????.???
>>
>
------------------------------
Subject: Digest Footer
_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
https://www.amsat.org/mailman/listinfo/amsat-bb
------------------------------
End of AMSAT-BB Digest, Vol 15, Issue 23
****************************************
Read previous mail | Read next mail
| |