| |
CX2SA > SATDIG 24.06.14 14:04l 173 Lines 5199 Bytes #999 (0) @ WW
BID : AMSATBB9206
Read: GUEST
Subj: AMSAT-BB-digest V9 206
Path: IZ3LSV<IQ2LB<IK1NHL<CX2SA
Sent: 140624/1203Z @:CX2SA.SAL.URY.SA #:7193 [Salto] FBB7.00e $:AMSATBB9206
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: Question for Gpredict Users (Pavel Milanes Costa)
2. Re: Fodtrack Serial rotor controller on HamLib
(Pavel Milanes Costa)
3. SpaceX Launch Rescheduled To Next Month (B J)
----------------------------------------------------------------------
Message: 1
Date: Mon, 23 Jun 2014 09:40:59 -0400
From: Pavel Milanes Costa <co7wt@xxxxxx.xx.xx>
To: Richard Lawn <rjlawn@xxxxx.xxx>
Cc: Amsat - BBs <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Question for Gpredict Users
Message-ID: <53A82E6B.8080108@xxxxxx.xx.xx>
Content-Type: text/plain; charset=UTF-8; format=flowed
My mistake...
I found a error y my commands earlier sended to you...
In every sentence that states /dev/USB0 you you must put /dev/ttyUSB0
and so on..
note the tty between /dev/ and USB0
Sorry, I was away from home and now I tested at home and found the "bug"
73
El 20/06/14 18:30, Richard Lawn escribi?:
> Still doesn't seem to work, but thank you for your help. Linux is nearly
> like a foreign language to me hi hi. I'll paste a screen shot of the
> terminal window that might help diagnosis.
>
> When I then typed into the terminal - rigctl -m 101 -r /dev/ttyS0 the
> window just froze. I left it open and then tried to engage radio control
> through Gpredict and the screen dimmed and would not respond to any
> controls other than to shut down the application. Suggestions?
> Rick
>
>
> On Fri, Jun 20, 2014 at 6:07 PM, Pavel Milanes Costa <co7wt@xxxxxx.xx.xx
> <mailto:co7wt@xxxxxx.xx.xx>> wrote:
>
> Hi Richard...
>
> In Linux with Gperdict you have to use a hamlib "proxy"...
>
> First install the package hamlib-utils, using the console or terminal...
>
> If debian
>
> su -
> (provide your debian root paswd)
> apt-get install hamlib hamlib-utils
>
> if ubuntu
>
> sudo apt-get install hamlib hamlib-utils
> (provide your user passwd here)
>
> Then you must tune your rigctld command
>
> for a FT-847 this is a good starting point... again, in console...
>
> rigctld -m 101 -r /dev/USB0
>
> Where
>
> -m 101 is you telling the soft that you have a FT-847...
> -r /dev/USB0 is your serial device, in this case I use a usb to
> serial interface, if you use a REAL serial port in yopur PC you have
> to change /dev/USB0 by /dev/ttyS0
>
> The 0 in all this is the order... 0 is COM1 like in windows, and
> /dev/USB0 is the forst usb you connected...
>
> I think you already have dialup permissions...
>
>
> 73 de CO7WT
>
> ----- Mensaje original -----
> De: Richard Lawn <rjlawn@xxxxx.xxx <mailto:rjlawn@xxxxx.xxx>>
> Para: Amsat BB <amsat-bb@xxxxx.xxx <mailto:amsat-bb@xxxxx.xxx>>
> Enviado: Fri, 20 Jun 2014 17:41:24 -0400 (CDT)
> Asunto: [amsat-bb] Question for Gpredict Users
>
> I'm new to using Ubuntu-Linux. I finally with a lot of outside
> counciling
> got FlDigi to run using either Hamlib or Flrig to handle CAT on my
> FT-847.
> I thought I was home free until I found that Gpredict would not
> control CAT
> on the radio. What am I doing wrong? Can anyone help? Linux is my only
> resource on this old XP P3 computer. Ubuntu runs great if I can only
> learn
> how to use command line Linus language hi hi!
> 73
> Rick
> W2JAZ
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx <mailto:AMSAT-BB@xxxxx.xxx>. Opinions
> expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
>
------------------------------
Message: 2
Date: Mon, 23 Jun 2014 10:11:13 -0400
From: Pavel Milanes Costa <co7wt@xxxxxx.xx.xx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fodtrack Serial rotor controller on HamLib
Message-ID: <53A83581.4070400@xxxxxx.xx.xx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
El 22/06/14 23:39, Greg D escribi?:
> Final runstring: rotctld -r /dev/ttyS3 -s 9600 -m 603 -C stop_bits=2 -C
> timeout=1
>
> Thanks again,
>
> Greg KO6TH
Yaesu GS232B....for the record on the maillist....
------------------------------
Message: 3
Date: Mon, 23 Jun 2014 18:18:52 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] SpaceX Launch Rescheduled To Next Month
Message-ID:
<CAP7QzkPT+KOosmqdpcn1fts2zO8t2TB5FMnxr2osHz2_BNc1tA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
http://www.spaceflightinsider.com/space-flight-missions/commercial-space-space
-flight-missions/spacex/orbcomm_og2/launch-spacex-falcon-9-postponed-earlier-f
irst-week-july/
http://www.nasaspaceflight.com/2014/06/spacex-falcon-9-v1-1-orbcomm-og2-missio
n/
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 9, Issue 206
****************************************
Read previous mail | Read next mail
| |
