| |
CX2SA > SATDIG 08.05.14 21:03l 615 Lines 18440 Bytes #999 (0) @ WW
BID : AMSATBB9165
Read: GUEST
Subj: AMSAT-BB-digest V9 165
Path: IZ3LSV<IK2XDE<ON4HU<CX2ACB<CX2SA
Sent: 140508/1902Z @:CX2SA.SAL.URY.SA #:5871 [Salto] FBB7.00e $:AMSATBB9165
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: LituanicaSAT-1 reboot test - reports requested
(Dave Webb KB1PVH)
2. Lituanicasat-1 Beacon Heard (B J)
3. Re: Old FT-847 and doppler control (Bill (W1PA))
4. LituanicaSat beacons heard over Brazil! (Roland Zurmely)
5. MARA Hamfest (Dale Hershberger)
6. Re: LituanicaSat beacons heard over Brazil! (Ted)
7. Re: LituanicaSat beacons heard over Brazil! (Roland Zurmely)
8. Re: LituanicaSAT-1 reboot test - reports requested (M5AKA)
9. Keps (jerry keeton)
10. Re: Keps (Alan)
11. Re: Keps (Joe Fitzgerald)
12. keps (jerry keeton)
13. Re: Keps (Dino Papas)
14. For Sale: FT-847 (Alan)
15. Re: Keps (MacDoppler) (Bill Howell)
----------------------------------------------------------------------
Message: 1
Date: Wed, 7 May 2014 15:01:01 -0400
From: Dave Webb KB1PVH <kb1pvh@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: LituanicaSAT-1 reboot test - reports requested
Message-ID:
<CAEMY9FeQmGTmjXcbx5xP+p-3WNa06HN2=HPb6CJL=NxZM3WMoA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
Just had a pass here on East coast of US. Listened on 437.275 USB +/-
doppler. Here is a link to last half of pass if anyone wants to listen
https://www.dropbox.com/s/6gbcoswpgjn7sse/LITUANICASAT1_05072014_1830utc.mp3
Dave-KB1PVH
On Wed, May 7, 2014 at 2:32 PM, B J <va6bmj@xxxxx.xxx> wrote:
> On 5/7/14, M5AKA <m5aka@xxxxx.xx.xx> wrote:
> > From the LituanicaSAT-1 team. 73 Trevor M5AKA
> > ----
> > Dear radio amateurs,
> >
> > I would like to notify that after a one month of uninterrupted and stable
> > operation of LituanicaSAT-1 we have decided to perform watchdog
> operational
> > test. As a consequence the satellite should have rebooted today at about
> > midday European time and both CW FM beacon on 437.275 MHz and FSK packet
> > telemetry on 437.544 MHz should be on at least until tomorrow 8:00 UTC.
> We
> > yet have no confirmation about that and would be grateful for any of your
> > reports.
> >
>
> I believe I heard the beacon on CW here in DO33 a few minutes ago.
> The signal was of moderate strength and it faded once in a while,
> though that might have been my fault as I was tuning my FT-817
> manually.
>
> I might try again during its next pass.
>
> 73s
>
> Bernhard VA6BMJ @ DO33FL
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 2
Date: Wed, 7 May 2014 20:14:03 +0000
From: B J <va6bmj@xxxxx.xxx>
To: ly5n@xxx.xx
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Lituanicasat-1 Beacon Heard
Message-ID:
<CAP7QzkN_-Yc=28DxsfCvZ-kLeNdCq02Qs-83qsFUSqQVcFDPEw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8
I listened to the signal on CW between 1957 and 1959 today here in
DO33. It was somewhat fainter than the previous pass with some more
background noise.
Towards the end of the window, I switched over to FM and heard it for
a few seconds as well before I lost the signal behind my apartment
building.
The signal faded once in a while, though that might have been because
I was tuning my FT-817 manually and may not have kept up with the
Doppler shift.
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 3
Date: Wed, 7 May 2014 16:50:46 -0400
From: "Bill \(W1PA\)" <w1pa@xxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Old FT-847 and doppler control
Message-ID: <BAY179-DS19C01818B9824FB3ED2DD1984E0@xxx.xxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=response
I just wanted to let everyone know that Erich (DK1TB, re:
SatPC32)
contacted me off the list and offered to modify and provide
me
with a SatPC32.exe that would not try to poll the rig, but
push only i.e. work with my
old, one-way-CAT FT-847. I overlaid the new executable and
was
able to fully control the rig through the SatPC32 and
Wisat32 program UIs.
I just wanted to publicly thank Erich for his unsolicited
help.
Ich bin Ihnen sehr dankbar!
If you are in the same boat, please contact Erich off-list
for the executable.
Bill W1PA
------------------------------
Message: 4
Date: Wed, 7 May 2014 16:26:32 -0700 (PDT)
From: Roland Zurmely <py4zbz@xxxxx.xxx>
To: AMSAT <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] LituanicaSat beacons heard over Brazil!
Message-ID:
<1399505192.20346.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Very good signals in CW and 9k6 data received:
http://www.qsl.net/py4zbz/lituan.htm#b
LituanicaSAT
? LituanicaSAT-1 por PY4ZBZ??? em? 28-02-2014?????
rev.? 07-05-2014 ? Transponder
linear. ? Dados a 9k6 bauds. ?
View on www.qsl.net Preview by Yahoo
73 de Roland PY4ZBZ?
------------------------------
Message: 5
Date: Wed, 07 May 2014 17:08:25 -0800
From: Dale Hershberger <daleh@xxxxxx.xxx>
To: amsat-bbs <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] MARA Hamfest
Message-ID: <536AD909.60208@xxxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Saturday May 10 will be the Matanuska Amatuer Radio Association
(MARA) Hamfest.
Myself, KL7XJ and Craig,KL4E will be representing AMSAT for the event.
We will be giving a presentation and doing satellite demos. Only
SO-50 will be worked.
The passes we plan on working are:
2008-2020 EL 35
2148-2201 EL 76
2329-2342 El 51
Times are UTC and are based on pass times for Wasilla, AK, location of
the hamfest.
We will looking for contacts with anyone.
Dale/KL7XJ
------------------------------
Message: 6
Date: Wed, 7 May 2014 18:12:30 -0700
From: "Ted" <k7trkradio@xxxxxxx.xxx>
To: "'Roland Zurmely'" <py4zbz@xxxxx.xxx>, "'AMSAT'"
<amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: LituanicaSat beacons heard over Brazil!
Message-ID: <000901cf6a5a$968b0d90$c3a128b0$@xxx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Roland, question, please:
Ham Radio Deluxe Satellite program is listing 'Litsat-1' and 'Lituansat' in
the satellite definitions.
Which is the correct name for this bird in terms of the correct keps
Thanks for any help
73, Ted
K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Roland Zurmely
Sent: Wednesday, May 07, 2014 4:27 PM
To: AMSAT
Subject: [amsat-bb] LituanicaSat beacons heard over Brazil!
Very good signals in CW and 9k6 data received:
http://www.qsl.net/py4zbz/lituan.htm#b
LituanicaSAT
? LituanicaSAT-1 por PY4ZBZ??? em? 28-02-2014 rev.? 07-05-2014 ? Transponder
linear. ? Dados a 9k6 bauds. ?
View on www.qsl.net Preview by Yahoo
73 de Roland PY4ZBZ
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
------------------------------
Message: 7
Date: Thu, 8 May 2014 04:19:37 -0700 (PDT)
From: Roland Zurmely <py4zbz@xxxxx.xxx>
To: AMSAT <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: LituanicaSat beacons heard over Brazil!
Message-ID:
<1399547977.1176.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Hi Ted ?K7TRK,
The correct names are ?(from Celestrak) :
LITSAT-1 : ?Norad 39568
LITUANICASAT-1 : ?Norad 39569
73 de Roland PY4ZBZ
------------------------------
Message: 8
Date: Thu, 8 May 2014 15:38:03 +0100 (BST)
From: M5AKA <m5aka@xxxxx.xx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: LituanicaSAT-1 reboot test - reports requested
Message-ID:
<1399559883.94119.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Dear radio amateurs,
Thank You very much for your reports. Reset has been confirmed, during the
6:30 UTC pass over Lithuania we have switched on to safe mode to
re-charge the battery as the voltage has dropped down quite
substantially. All radio transmissions are currently stopped.
73,
Laurynas, LY1LM
------------------------------
Message: 9
Date: Thu, 8 May 2014 10:23:42 -0500
From: "jerry keeton" <jkboxk@xxxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Keps
Message-ID: <22E78822B5DB4CC59896BBE18EC98815@xxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
I use the amsat.org page to update Keps on satpc32 , but has not connected
for several days . Problem with site or Me ? Other update sites work , but
not accurate .
Jerry WB5LHD
------------------------------
Message: 10
Date: Thu, 8 May 2014 10:39:35 -0500
From: Alan <wa4sca@xxxxx.xxx>
To: "'jerry keeton'" <jkboxk@xxxxxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Keps
Message-ID: <F728448429A74B6C9D0EA1B9240A1079@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
Jerry,
We were making changes in the server. After the change, we verified that
things were working with
SatPC32. However, something isn't working now. We will take a look at what
has gone wrong.
Apologies for the inconvenience. For now, please use the following URL:
http://ww2.amsat.org/amsat/ftp/keps/current/nasa.all
73s,
Alan
WA4SCA
<-----Original Message-----
<From: amsat-bb-bounces@xxxxx.xxx
<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of jerry keeton
<Sent: Thursday, May 08, 2014 10:24 AM
<To: amsat-bb@xxxxx.xxx
<Subject: [amsat-bb] Keps
<
<I use the amsat.org page to update Keps on satpc32 , but has
<not connected for several days . Problem with site or Me ?
<Other update sites work , but not accurate .
<Jerry WB5LHD
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
<the author.
<Not an AMSAT-NA member? Join now to support the amateur
<satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
------------------------------
Message: 11
Date: Thu, 8 May 2014 12:20:09 -0400
From: "Joe Fitzgerald" <jfitzgerald@xxxx.xxx.xxx>
To: APBIDDLE@xxxxxxx.xxx
Cc: amsat-bb@xxxxx.xxxx 'jerry keeton' <jkboxk@xxxxxxxx.xxx>
Subject: [amsat-bb] Re: Keps
Message-ID: <466ed1631e479ffa49feb2e7920395cf.squirrel@xxxx.xxx.xxx>
Content-Type: text/plain;charset=iso-8859-1
Thank you for reporting this, Jerry. As Alan said, we made a test to
determine that the "redirection" change I implemented a couple of days ago
would not affect SatPC32 users, but it was apparently not a thorough test.
I reverted the change, so you and other SatPC32 users will not be
inconvenienced further.
If anyone notices new problems crop up please cc: webmaster@xxxxx.xxx for
fastest resolution. I just happened to scan amsat-bb during my lunch
break today and saw this. I am implementing some back room
infrastructure upgrades, so there may be other hiccups observed over the
next few weeks.
-Joe
-Joe KM1P
> Jerry,
>
> We were making changes in the server. After the change, we verified that
> things were working with
> SatPC32. However, something isn't working now. We will take a look at
> what has gone wrong.
> Apologies for the inconvenience. For now, please use the following URL:
>
> http://ww2.amsat.org/amsat/ftp/keps/current/nasa.all
>
> 73s,
>
> Alan
> WA4SCA
>
>
> <-----Original Message-----
> <From: amsat-bb-bounces@xxxxx.xxx
> <[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of jerry keeton
> <Sent: Thursday, May 08, 2014 10:24 AM
> <To: amsat-bb@xxxxx.xxx
> <Subject: [amsat-bb] Keps
> <
> <I use the amsat.org page to update Keps on satpc32 , but has
> <not connected for several days . Problem with site or Me ?
> <Other update sites work , but not accurate .
> <Jerry WB5LHD
> <_______________________________________________
> <Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
> <the author.
> <Not an AMSAT-NA member? Join now to support the amateur
> <satellite program!
> <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> <
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 12
Date: Thu, 8 May 2014 11:32:55 -0500
From: "jerry keeton" <jkboxk@xxxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] keps
Message-ID: <1EF6F638786643828540918522990F9D@xxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
Thanks Guys , Update working great . Now if You could help with the
atmospheric conditions , please . Noisey here in Louisiana .
73's WB5LHD
------------------------------
Message: 13
Date: Thu, 8 May 2014 12:36:51 -0400
From: Dino Papas <kl0s@xxx.xxx>
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Keps
Message-ID: <26818C03-AB44-4025-90BE-7FB5CF27E235@xxx.xxx>
Content-Type: text/plain; charset=windows-1252
Can another MacDoppler user verify that they were able/not able to download
the Keps after this issue came up? I THINK mine did not but wasn?t paying
enough attention to the voice announcement from MD that any data was
actually updated.
Dino KL0S
On May082014, at 1220 PM, Joe Fitzgerald <jfitzgerald@xxxx.xxx.xxx> wrote:
> Thank you for reporting this, Jerry. As Alan said, we made a test to
> determine that the "redirection" change I implemented a couple of days ago
> would not affect SatPC32 users, but it was apparently not a thorough test.
> I reverted the change, so you and other SatPC32 users will not be
> inconvenienced further.
>
> If anyone notices new problems crop up please cc: webmaster@xxxxx.xxx for
> fastest resolution. I just happened to scan amsat-bb during my lunch
> break today and saw this. I am implementing some back room
> infrastructure upgrades, so there may be other hiccups observed over the
> next few weeks.
>
> -Joe
>
> -Joe KM1P
>
>> Jerry,
>>
>> We were making changes in the server. After the change, we verified that
>> things were working with
>> SatPC32. However, something isn't working now. We will take a look at
>> what has gone wrong.
>> Apologies for the inconvenience. For now, please use the following URL:
>>
>> http://ww2.amsat.org/amsat/ftp/keps/current/nasa.all
>>
>> 73s,
>>
>> Alan
>> WA4SCA
>>
>>
>> <-----Original Message-----
>> <From: amsat-bb-bounces@xxxxx.xxx
>> <[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of jerry keeton
>> <Sent: Thursday, May 08, 2014 10:24 AM
>> <To: amsat-bb@xxxxx.xxx
>> <Subject: [amsat-bb] Keps
>> <
>> <I use the amsat.org page to update Keps on satpc32 , but has
>> <not connected for several days . Problem with site or Me ?
>> <Other update sites work , but not accurate .
>> <Jerry WB5LHD
>> <_______________________________________________
>> <Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
>> <the author.
>> <Not an AMSAT-NA member? Join now to support the amateur
>> <satellite program!
>> <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>> <
>>
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 14
Date: Thu, 8 May 2014 11:52:53 -0500
From: Alan <wa4sca@xxxxx.xxx>
To: "AMSAT-BB" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] For Sale: FT-847
Message-ID: <C1D2834934504F67BAD9A5D8051CA6AD@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
I am posting this for local friend, as it is of interest to the satellite
community:
For Sale- Yaesu FT-847, S/N 91250171. This is a very clean radio from a
non-smoking environment. I
do not have the original box but I do have the power cord, microphone,
amplifier keying cable and
manual. It was used for satellite operations, but has served as a spare for
the past six years. Can
deliver to Dayton next week on Friday or until noon on Saturday. Price is
$1050 plus shipping and I
will split the shipping costs.
Contact Jack Cox, KA4OTB at 615.715.9626 or ka4otb@xxxxxxx.xxx.
We have verified that it has the fully bidirectional CAT. If interested,
please contact Jack DIRECTLY
for more information.
73s,
Alan
WA4SCA
------------------------------
Message: 15
Date: Thu, 08 May 2014 12:15:31 -0500
From: Bill Howell <mrbillmac@xxx.xxx>
To: Amsat List <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Keps (MacDoppler)
Message-ID: <B8FA0DFD-6343-42DB-89A3-9CF58B5F61DE@xxx.xxx>
Content-Type: text/plain; charset=windows-1252
Dino,
Look at the kepler.dat file in the Finder.
It resides in the MacDoppler data folder.
You can look at the "modified" date in the Finder, or open the file in
TextEdit...
the date should show at the top of the opened document.
The above instructions are for MacDopplerPro_X2.9.3.
If you are using a different version, you could possibly find the kepler.dat
file in another location.
Bill N5AB
On May 8, 2014, at 11:36 AM, Dino Papas wrote:
> Can another MacDoppler user verify that they were able/not able to
download the Keps after this issue came up? I THINK mine did not but wasn?t
paying enough attention to the voice announcement from MD that any data was
actually updated.
>
> Dino KL0S
>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 9, Issue 165
****************************************
Read previous mail | Read next mail
| |
