| |
CX2SA > SATDIG 13.12.13 21:03l 245 Lines 6637 Bytes #999 (0) @ WW
BID : AMSATBB8456
Read: GUEST
Subj: AMSAT-BB-digest V8 456
Path: IZ3LSV<IK2XDE<DB0RES<DB0ANF<CX2SA
Sent: 131213/2002Z @:CX2SA.SAL.URY.SA #:1432 [Salto] FBB7.00e $:AMSATBB8456
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: SatPC32 ISS help needed (Ted)
2. PDF of ARRL QST WRAPS article (M5AKA)
3. Re: Historical AO-73 WOD (David Johnson)
----------------------------------------------------------------------
Message: 1
Date: Thu, 12 Dec 2013 12:26:49 -0800
From: "Ted" <k7trkradio@xxxxxxx.xxx>
To: <APBIDDLE@xxxxxxx.xxx>, "'AMSAT-BB'" <amsat-bb@xxxxx.xxx>
Cc: 'CC' <APBIDDLE@xxxxxx.xxx>
Subject: [amsat-bb] Re: SatPC32 ISS help needed
Message-ID: <000801cef778$7c880bf0$759823d0$@xxx>
Content-Type: text/plain; charset="us-ascii"
Found the buttons ! that was the issue
Thanks, Alan and Erich too
Merry Christmas to all
73, Ted
K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Alan
Sent: Thursday, December 12, 2013 4:57 AM
To: 'AMSAT-BB'
Cc: CC
Subject: [amsat-bb] Re: SatPC32 ISS help needed
Hi Ted,
I do not have an FT-847 handy to test, but here is some information.
The TX/RX buttons have been moved. At the very bottom line, Obs, Config,
etc, hover your mouse. You will get a message to "Double click to
activate/deactivate RX/TX buttons." They will appear in the corners of the
program.
I have a full complement of help files, including one for SatPC32ISS in the
"?" section.
Are you using Configuration 1? SatPC32ISS picks up most of its information
from SatPC32, and in the past I found it did not get the correct radio
information if I was using Configuration 2.
Finally, check the frequency update interval, main program. If you have the
FM update set to 100 Hz, it may take a significant time except during a pass
for the Doppler to shift enough to update.
73s,
Alan
WA4SCA
<-----Original Message-----
<From: amsat-bb-bounces@xxxxx.xxx
<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Ted
<Sent: Wednesday, December 11, 2013 6:31 PM
<To: 'AMSAT-BB'
<Subject: [amsat-bb] SatPC32 ISS help needed < <HI < < < <I cannot seem to
get the ISS portion of the program to operate <properly with
<FT-847
<
<
<
<1. Regular SatPC32 program works as it should
<
<
<
<2. In ISS, I have CAT control (trigger on/off with C
<
<
<
<3. SAT on the radio is turned off
<
<
<
<4. In CAT, I can select the pair for the repeater and the
<downlink freg
<will appear on the radio (VFO A) The initial freq in the <program appears
but <does not update further < < <
< 5. Manual says "With the Yaesu FT-847 only use the 'TX' / 'RX'
<controls of SatPC32ISSto switch
<
< the radio to TX
<or RX, rsp.
<Otherwise the VFO can't be tuned to the TX frequency <
< before the radio
<is switched to
<TX."
<
<
<
< Program is not displaying TX/RX buttons or
<controls nor am I
<able to key tx with + or - keys on 10 key pad < < <
<6. FYI, there are no files shown in any o the aux files.
<(but, I suspect
<that info is pulled from the main program) < < <
< I must have something set wrong. Any help appreciated
<
<
<
<73,
<
<
<
<Ted
<
<K7TRK
<
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of <the author.
<Not an AMSAT-NA member? Join now to support the amateur <satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 2
Date: Thu, 12 Dec 2013 20:43:34 +0000 (GMT)
From: M5AKA <m5aka@xxxxx.xx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] PDF of ARRL QST WRAPS article
Message-ID:
<1386881014.35761.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
Thanks to Mark WA8SME and the ARRL a PDF copy of the WRAPS article is
available on the AMSAT-UK website, see
http://amsat-uk.org/2013/12/12/wraps-a-portable-satellite-antenna-rotator-syst
em/
----
73 Trevor M5AKA
AMSAT-UK website http://amsat-uk.org/
Facebook https://www.facebook.com/pages/AMSAT-UK/208113275898396
Twitter https://twitter.com/AMSAT_UK
----
------------------------------
Message: 3
Date: Thu, 12 Dec 2013 22:24:20 +0000
From: David Johnson <dave@xxxxx.xx.xx>
To: "Ronald G. Parsons" <w5rkn@xxxxx.xxx>, AmsatBB
<amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Historical AO-73 WOD
Message-ID:
<CAHOBG6WiWYS-SCwbOq7Upv=QAwq4PHerP9GQbiZTyD9W3fZ_Sw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Hi Ron,
We have stored realtime, highres and wod since the satellite was first
turned on in the lab.
The plan is to make this available via a login to the warehouse and
allowing download of such correlations.
Please bear with us. My todo list is quite long :-)
I'm currently working on the highres for download.
Dave.
On 12 Dec 2013 22:04, "Ronald G. Parsons" <w5rkn@xxxxx.xxx> wrote:
> Dave,
>
> Is it possible to get historical WOD? On the pass over the USA at 0340 UTC
> 30 Nov 2013, I recorded frequency drift and sudden fluctuations of the
> telemetry center frequency. I would like to be able to correlate the sudden
> shifts of frequency to other environmental parameters.
>
> Ron W5RKN
>
>
>
------------------------------------------------------------------------------
-------------
> Date: Thu, 12 Dec 2013 17:21:54 +0000
> From: David A B Johnson <dave@xxxxx.xx.xx>
> To: Amsat - BBs <amsat-bb@xxxxx.xxx>
> Subject: [amsat-bb] FUNcube WOD available for Download
> Message-ID: <52A9F0B2.7010801@xxxxx.xx.xx>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Hi,
>
> As part of our STEM outreach strategy we are making WOD available for
> off-line analysis.
>
> This is delivered as a .csv file which can be downloaded from the Data
> Warehouse by clicking
> on the link on the WOD page:
>
> https://warehouse.funcube.org.uk/wod.html
>
> The file is written at 23:59 UTC every day and contains the WOD for the
> preceding 24 hours.
>
> Please read the notes on the page regarding the times stored in the file.
>
> Enjoy!
>
> 73
>
> Dave, G4DPZ
> On behalf of the AO-73 team.
>
>
>
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 8, Issue 456
****************************************
Read previous mail | Read next mail
| |
