OpenBCM V1.08-5-g2f4a (Linux)

Packet Radio Mailbox

IZ3LSV

[San Dona' di P. JN]

 Login: GUEST





  
CX2SA  > SATDIG   30.11.13 22:03l 372 Lines 10988 Bytes #999 (0) @ WW
BID : AMSATBB8431
Read: GUEST
Subj: AMSAT-BB-digest V8 431
Path: IZ3LSV<HB9TVW<IK2XDE<ON4HU<CX2ACB<CX2SA
Sent: 131130/2002Z @:CX2SA.SAL.URY.SA #:1047 [Salto] FBB7.00e $:AMSATBB8431
From: CX2SA@CX2SA.SAL.URY.SA
To  : SATDIG@WW

Today's Topics:

   1. SATPC32 & AO73 question (Ted)
   2. AO-73 frequency fluctuations (Ronald G. Parsons)
   3. Re: help with satpc32iss (Nick Pugh K5QXJ)
   4. K4AMG W4BUE  Items for Sale (Rich/wa4bue)
   5. Funcube Handbooks (richard limebear)


----------------------------------------------------------------------

Message: 1
Date: Fri, 29 Nov 2013 14:23:11 -0800
From: "Ted" <k7trkradio@xxxxxxx.xxx>
To: "'AMSAT-BB'" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] SATPC32 & AO73 question
Message-ID: <002a01ceed51$971458b0$c53d0a10$@xxx>
Content-Type: text/plain;	charset="us-ascii"

Hi all,



In spite of my usual ineptness with this program, I have managed to have it
talking to my FT-847, downloaded the keps for AO73 and appear to be tracking
it!!



However, I can't seem to get the radio to hold the up/dn frequencies in the
proper VFO's. I start out with the uplink showing in VFOA, but after a min
or so the frequencies swap and I have to use the a><b button to get them
back.



Am I missing a setting?



Any help appreciated



And Happy Thanksgiving to all



73, Ted

K7TRK



------------------------------

Message: 2
Date: Fri, 29 Nov 2013 22:31:24 -0600
From: "Ronald G. Parsons" <w5rkn@xxxxx.xxx>
To: "AMSAT-BB" <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] AO-73 frequency fluctuations
Message-ID: <B0875B99BEBB44D8AE1E5208370AC7A9@xxxxxxxxx>
Content-Type: text/plain;	charset="utf-8"

Using the keps from this morning (epoch 13333.066), I measured the frequency
of the telemetry signal of AO-73 during a 43 deg pass at about 1648 UTC (Nov
29). This is a pass with the satellite in the sun
The frequencies are the frequency ?at the satellite? calculated by SatPC32
to place the center of the telemetry in the middle of my 3.0 kHz USB
passband. Thus the frequency of the center ?at the satellite? are 1.50 kHz
higher than these.
Elevation      xx where the frequency is 145935.xx MHz
0                  .94
5                  .87
10                .81
15                .73
20                .70
25                .62
30                .60
35                .56
40                .57
43                .54
40                .48
35                .42
30                .37
25                .39
20                .36
15                .32
10                .30
5                  .27
0                  .20

Thus a change of about 600 Hz over the entire pass with the frequency
DECREASING.
------------------------------------------------------------------------------
----------------
Using the keps from this evening (epoch 13333.744), I measured the frequency
of the telemetry signal of AO-73 during a 21 deg pass at about 0340 UTC (Nov
30). This is a pass with the satellite in shadow, running on batteries.
The frequencies are the frequency ?at the satellite? calculated by SatPC32
to place the center of the telemetry in the middle of my 3.0 kHz USB
passband. Thus the frequency of the center ?at the satellite? are 1.50 kHz
higher than these.
Elevation      xx where the frequency is 145934.xx MHz
0                  145933.98
5                  .00
10                .12
15                .16
****
20                .21
****
20                .32
****
15                .48
****
10                .50
5                  .65
2.5               .74
0                  .76
Thus a change of about 800 Hz over the entire pass with the frequency
INCREASING. However, where noted with ****, there were were sudden shifts in
frequency up and down of 1.0 to 1.5 kHz.
During this pass, the linear transponder was on, and I assume the sudden
shifts of frequency noted by **** could have been caused by changes in total
power used by the transponder.
------------------------------------------------------------------------------
---------------
The first pass above was during battery charging and the frequency
decreased. The second pass was during battery discharging and the frequency
was increasing.
The sudden shifts of frequency are very obvious when you are in QSO on the
transponder.
It would be interesting for someone to correlate the frequency shifts with
some parameter such as voltage or temperature.
Ron W5RKN
EM10ci


------------------------------

Message: 3
Date: Sat, 30 Nov 2013 09:14:04 -0600
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
To: "'Erich Eichmann'" <erich.eichmann@xxxxxxxx.xx>,
<APBIDDLE@xxxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: help with satpc32iss
Message-ID: <001a01ceedde$cfee32e0$6fca98a0$@xxx>
Content-Type: text/plain;	charset="us-ascii"

Eric and Alan

Thanks for the help  a reinstall fixed but a backup restore broke it.
Solution reinstall and move the file manually

nick

-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Erich Eichmann
Sent: Friday, November 29, 2013 12:19 PM
To: APBIDDLE@xxxxxxx.xxx
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: help with satpc32iss

Alan,
thanks for answering Nicks mail.
I have just sent him an answer offf the list. But I can also only suggest to
run DataBackup or to uninstall/reinstall the program.
73s, Erich, DK1TB

----- Original Message -----
From: "Alan" <APBIDDLE@xxxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Cc: "CC" <APBIDDLE@xxxxxx.xxx>
Sent: Friday, November 29, 2013 2:36 PM
Subject: [amsat-bb] Re: help with satpc32iss


> Nick,
>
> I just tried mine, and it starts fine.  Normally the Satpc32 programs are
> good with error messages,
> though they may be auf Deutsch.  Any chance an antivirus program is
> blocking it by mistake?  I have
> had that happen with other programs over the years.  Otherwise, nothing to

> suggest, except for a
> complete backup, removal and reinstall, test the "fresh" version, and then

> restore your old data.
> Perhaps Erich or someone will have a better answer.
>
> <I was hoping other on the list had the same problem.
>
> Misery loves company?  :)
>
> 73s,
>
> Alan
> WA4SCA
>
>
>
> <-----Original Message-----
> <From: Nick Pugh K5QXJ [mailto:quadpugh@xxxxxxxxx.xxxx
> <Sent: Friday, November 29, 2013 2:36 AM
> <To: APBIDDLE@xxxxxxx.xxxx 'AMSAT BB'
> <Cc: 'CC'
> <Subject: RE: [amsat-bb] Re: help with satpc32iss
> <
> <Hi Alan
> <Yes this is the same issue I got no replies.
> <
> <It has been many months since I tried the ISS version  . I
> <also uploaded a
> <new version of satpc with no joy.  The program starts out put
> <a icon on the
> <tray and then goes away.  I have seen this issue with other
> <programs that
> <can find some other file.
> <
> <I was hoping other on the list had the same problem.
> <
> <
> <
> <-----Original Message-----
> <From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
> <Behalf Of Alan
> <Sent: Thursday, November 28, 2013 5:46 PM
> <To: 'AMSAT BB'
> <Cc: CC
> <Subject: [amsat-bb] Re: help with satpc32iss
> <
> <Nick,
> <
> <Have you made any changes which we should know about to diagnose the
> <problem?  You asked about SatPC32ISS earlier.  Is this the
> <same problem,
> <that is, nothing now works?
> <
> <You could try a restore from the DataBackup program.
> <
> <73s,
> <
> <Alan
> <WA4SCA
> <
> <
> <<-----Original Message-----
> <<From: amsat-bb-bounces@xxxxx.xxx
> <<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nick Pugh K5QXJ
> <<Sent: Thursday, November 28, 2013 5:11 PM
> <<To: 'AMSAT BB'
> <<Subject: [amsat-bb] help with satpc32iss < <I am running xp pro and I
> <cannot get satpc32 to load  any suggestions < < < <nick < < <
> << < <Thanks <
> << < <nick <
> <<Office   337 593 8700
> <<
> <<Cell      337 258 2527
> <<
> <<
> <<
> <<Helping UL become a world Class Engineering  and Educational
> <School < < <
> <<_______________________________________________
> <<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
> <<the author.
> <<Not an AMSAT-NA member? Join now to support the amateur
> <<satellite program!
> <<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> <<
> <
> <_______________________________________________
> <Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
> <the author.
> <Not an AMSAT-NA member? Join now to support the amateur
> <satellite program!
> <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> <
> <
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>


_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb



------------------------------

Message: 4
Date: Sat, 30 Nov 2013 10:46:23 -0500
From: "Rich/wa4bue" <richard.siff@xxxxxxx.xxx>
To: "'AMSAT-BB'" <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] K4AMG W4BUE  Items for Sale
Message-ID: <97B7A512F71B4437AF68DDEB708C5F34@xxxxxxxxx>
Content-Type: text/plain; format=flowed; charset=iso-8859-1;
reply-type=original

Recently W3AFH became a SK.  In his Estate he gave our Club a R390 and a
75A1.  They were both reworked a few years ago by Harold Mills.

They look great and seem to operate just fine.

I also have a B&W 5100, looks great and operates well.  It has has 2
problems.  The meter switch needs cleaning and readjustment and the 6J6 osc
needs to be wiggled if the rig is off for a period of time.
I have the manual and spare sub chasis as extra parts and most of the tubes
Will deliver within 100 miles of Chesapeake, VA.  Will have them at Frost
Fest, February 1, in Richmond, VA.  Will have other stuff their to.  The B &
W is mine the rest of the gear is fund raiser for K4AMG MARC, K4AMG.org

I would prefer a pick up at my QTH so you can play with the radios.

Happy Holidays

God Bless

Rich
W4BUE
K4AMG MARC



------------------------------

Message: 5
Date: Sat, 30 Nov 2013 18:26:53 +0000
From: richard limebear <richard@xxxxx.xxxxx.xx.xx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Funcube Handbooks
Message-ID:
<E60DD5761D7C86409D61841C871CFE4C0299C27B@xxxxxxx.xxxx.xxxx>
Content-Type: text/plain; charset="us-ascii"

Folks

It seems some people are unable to find the handbook (in English, French and
Italian). Look here:
<http://funcube.org.uk/working-documents/funcube-handbook/>

I am awaiting the translations into Dutch and Spanish, maybe the translators
were waiting for me to get back from holiday (got back yesterday)

73
Richard G3RWL



------------------------------

_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb


End of AMSAT-BB Digest, Vol 8, Issue 431
****************************************


Read previous mail | Read next mail


 08.07.2025 11:18:09lGo back Go up