| |
CX2SA > SATDIG 29.11.13 20:23l 903 Lines 22929 Bytes #999 (0) @ WW
BID : AMSATBB8430
Read: GUEST
Subj: AMSAT-BB-digest V8 430
Path: IZ3LSV<IK2XDE<DB0RES<WA7V<CX2SA
Sent: 131129/1822Z @:CX2SA.SAL.URY.SA #:1028 [Salto] FBB7.00e $:AMSATBB8430
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. Commands for WREN SSTV Released (M5AKA)
2. help with satpc32iss (Nick Pugh K5QXJ)
3. Re: help with satpc32iss (Alan)
4. Re: AMSAT-NA Keps Page (Gus)
5. Today's SpaceX Launch Scrubbed (B J)
6. W5PFG/P grid trip to DM95,DM96,EM05,EM06,EM14 (Clayton Coleman)
7. Re: Today's SpaceX Launch Scrubbed (Bryce Salmi)
8. Re: Today's SpaceX Launch Scrubbed (B J)
9. Re: Today's SpaceX Launch Scrubbed (Bryce Salmi)
10. AO73 pass @ 0632 UTC tonight (Patrick STODDARD (WD9EWK/VA7EWK))
11. Re: help with satpc32iss (Nick Pugh K5QXJ)
12. Re: help with satpc32iss (Alan)
13. help with the CAPE II sat (Nick Pugh K5QXJ)
14. tle-new.txt (David W0DHB)
15. Re: help with satpc32iss (Erich Eichmann)
----------------------------------------------------------------------
Message: 1
Date: Thu, 28 Nov 2013 21:00:06 +0000 (GMT)
From: M5AKA <m5aka@xxxxx.xx.xx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Commands for WREN SSTV Released
Message-ID:
<1385672406.23827.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
It seems the SSTV PocketQube WREN is currently in a mode where it beacons on
437.405 MHz for 1.6 seconds then listens for 6 minutes on that frequency for
any commands. If none are received it goes to sleep for 2 minutes before
transmitting the beacon again.
The team have released the commands to enable WREN to transmit a SSTV
picture, see
http://amsat-uk.org/2013/11/28/commands-for-wren-sstv-released/
FUNcube-1 Video
http://amsat-uk.org/2013/11/28/funcube-1-command-success/
Delfi-n3Xt 2400 bps BPSK decoded in Japan
http://amsat-uk.org/2013/11/27/delfi-n3xt-2400-bps-bpsk-decoded-in-japan/
FUNcube-1 Whole Orbit Data Displayed
http://amsat-uk.org/2013/11/27/funcube-1-whole-orbit-data-displayed/
----
73 Trevor
M5AKA
AMSAT-UK website http://amsat-uk.org/
Facebook https://www.facebook.com/pages/AMSAT-UK/208113275898396
Twitter https://twitter.com/AMSAT_UK
----
------------------------------
Message: 2
Date: Thu, 28 Nov 2013 17:10:39 -0600
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] help with satpc32iss
Message-ID: <00a101ceec8f$0f149a50$2d3dcef0$@xxx>
Content-Type: text/plain; charset="us-ascii"
I am running xp pro and I cannot get satpc32 to load any suggestions
nick
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
------------------------------
Message: 3
Date: Thu, 28 Nov 2013 17:46:01 -0600
From: Alan <wa4sca@xxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Cc: CC <APBIDDLE@xxxxxx.xxx>
Subject: [amsat-bb] Re: help with satpc32iss
Message-ID: <7056EE4958B34C8C94A20347D363EF21@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
Nick,
Have you made any changes which we should know about to diagnose the
problem? You asked about
SatPC32ISS earlier. Is this the same problem, that is, nothing now works?
You could try a restore from the DataBackup program.
73s,
Alan
WA4SCA
<-----Original Message-----
<From: amsat-bb-bounces@xxxxx.xxx
<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nick Pugh K5QXJ
<Sent: Thursday, November 28, 2013 5:11 PM
<To: 'AMSAT BB'
<Subject: [amsat-bb] help with satpc32iss
<
<I am running xp pro and I cannot get satpc32 to load any suggestions
<
<
<
<nick
<
<
<
<
<
<Thanks
<
<
<
<nick
<
<Office 337 593 8700
<
<Cell 337 258 2527
<
<
<
<Helping UL become a world Class Engineering and Educational School
<
<
<
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
<the author.
<Not an AMSAT-NA member? Join now to support the amateur
<satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
------------------------------
Message: 4
Date: Thu, 28 Nov 2013 13:37:56 -0400
From: Gus <gus@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: AMSAT-NA Keps Page
Message-ID: <52977F74.4080102@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
On 11/28/2013 08:57 AM, Alan wrote:
> The AMSAT service is tightly focused on satellites of interest to
> amateurs, and in fact began life when Keps were sent out by snail mail,
and then packet.
In the AMSAT format, which to be honest, I preferred to TLE!
--
Gus 8P6SM
The Easternmost Isle
------------------------------
Message: 5
Date: Thu, 28 Nov 2013 23:54:19 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Today's SpaceX Launch Scrubbed
Message-ID:
<CAP7QzkOVyejKhALN_w62GYH2qkTC6Mo7V_Gqiz2_0EG=2bbmVg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
The first attempt scrubbed due to low engine thrust after ignition.
The second attempt ended at less than 1 minute to go. There was no
announcement on the live Internet feed about what the cause was or
when the next attempt will be made.
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 6
Date: Thu, 28 Nov 2013 19:35:15 -0600
From: Clayton Coleman <kayakfishtx@xxxxx.xxx>
To: AMSAT-BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] W5PFG/P grid trip to DM95,DM96,EM05,EM06,EM14
Message-ID:
<CAPovOwd0ugwZayj1tZ6kv91+xf0jweq_-j3YpdFatw-bkasm5g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Monday (evening) 11/2 - DM95/96
Tuesday (evening) 11/3 - EM05/06
Wednesday morning (early) 11/4 - EM14
If you need these grids confirmed, please email me off-BB. Can work
all sats except AO-7 mode A.
73
Clayton
W5PFG
------------------------------
Message: 7
Date: Thu, 28 Nov 2013 18:41:13 -0800
From: Bryce Salmi <bstguitarist@xxxxx.xxx>
To: B J <va6bmj@xxxxx.xxx>
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Today's SpaceX Launch Scrubbed
Message-ID:
<CAN5j0sqhFzsYDuAsAviRYoAfdk9Oeij4MeBqfvm-RjcCOEYAAA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
An announcement regarding the Second abort was made and the abort was
manual due to engineers running out of time to review todays first abort
data. You do not launch with a rocket that is even slightly unhealthy or
has questioned health. Live to fly another day. Falcon 9 is held on the pad
for several seconds after ignition while the on-board computer checks the
rockets' health. If it doesn't like something it will not let the hold
downs actuate on the launch pad allowing the rocket to move. Thus, the
first abort. A similar abort after ignition was seen on the first launch
attempt of C2+.
Bryce
KB1LQC
On Thursday, November 28, 2013, B J wrote:
> The first attempt scrubbed due to low engine thrust after ignition.
> The second attempt ended at less than 1 minute to go. There was no
> announcement on the live Internet feed about what the cause was or
> when the next attempt will be made.
>
> 73s
>
> Bernhard VA6BMJ @ DO33FL
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx <javascript:;>. Opinions expressed are those
> of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 8
Date: Fri, 29 Nov 2013 03:13:32 +0000
From: B J <va6bmj@xxxxx.xxx>
To: bstguitarist@xxxxx.xxx
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Today's SpaceX Launch Scrubbed
Message-ID:
<CAP7QzkMAnfV_wjYA9WbwVKw89XYr-VO1cqE4p=HJ=0G=VYYTfQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
On 11/29/13, Bryce Salmi <bstguitarist@xxxxx.xxx> wrote:
> An announcement regarding the Second abort was made and the abort was
> manual due to engineers running out of time to review todays first abort
> data. You do not launch with a rocket that is even slightly unhealthy or
> has questioned health. Live to fly another day. Falcon 9 is held on the pad
> for several seconds after ignition while the on-board computer checks the
> rockets' health. If it doesn't like something it will not let the hold
> downs actuate on the launch pad allowing the rocket to move. Thus, the
> first abort. A similar abort after ignition was seen on the first launch
> attempt of C2+.
At the time of the second abort, all I heard from the comm loop was
one of the flight directors calling for a halt. Neither of SpaceX's
commentators didn't go into great detail as to what the cause was.
Even if the ground crew could have debugged the problem, there
wouldn't have been any time to fly as the available launch window was
nearly closed.
One of the space news sites I monitor indicated that Friday of next
week would be the earliest available day. The details concerning that
were rather vague, so it might have just been a rumour.
73s
Bernhard VA6BMJ @ DO33FL
<snip>
------------------------------
Message: 9
Date: Thu, 28 Nov 2013 19:30:33 -0800
From: Bryce Salmi <bstguitarist@xxxxx.xxx>
To: B J <va6bmj@xxxxx.xxx>
Cc: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Today's SpaceX Launch Scrubbed
Message-ID:
<CAN5j0sqYB01b28CRkwz+MMCc39V62uYxvJZcwxRoXQH2AgiWEw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
No problem! Just putting the info out there.
Bryce
KB1LQC
On Thu, Nov 28, 2013 at 7:13 PM, B J <va6bmj@xxxxx.xxx> wrote:
> On 11/29/13, Bryce Salmi <bstguitarist@xxxxx.xxx> wrote:
> > An announcement regarding the Second abort was made and the abort was
> > manual due to engineers running out of time to review todays first abort
> > data. You do not launch with a rocket that is even slightly unhealthy or
> > has questioned health. Live to fly another day. Falcon 9 is held on the
> pad
> > for several seconds after ignition while the on-board computer checks the
> > rockets' health. If it doesn't like something it will not let the hold
> > downs actuate on the launch pad allowing the rocket to move. Thus, the
> > first abort. A similar abort after ignition was seen on the first launch
> > attempt of C2+.
>
> At the time of the second abort, all I heard from the comm loop was
> one of the flight directors calling for a halt. Neither of SpaceX's
> commentators didn't go into great detail as to what the cause was.
> Even if the ground crew could have debugged the problem, there
> wouldn't have been any time to fly as the available launch window was
> nearly closed.
>
> One of the space news sites I monitor indicated that Friday of next
> week would be the earliest available day. The details concerning that
> were rather vague, so it might have just been a rumour.
>
> 73s
>
> Bernhard VA6BMJ @ DO33FL
>
> <snip>
>
------------------------------
Message: 10
Date: Thu, 28 Nov 2013 21:24:51 -0800 (PST)
From: "Patrick STODDARD \(WD9EWK/VA7EWK\)" <amsat-bb@xxxxxx.xxx>
To: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] AO73 pass @ 0632 UTC tonight
Message-ID:
<1385702691.42157.YahooMailAndroidMobile@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Hi!
I will be on the next AO-73 pass at 0632 UTC tonight.
Hope to hear anyone else out west that might still
be up and around the radio at that hour.
The last pass around 0455 UTC was the best pass to
the east that I've worked on this satellite so far. I made
only 2 QSOs, but could hear my 5W signals through
the transponder from 2 minutes after AOS almost
until LOS, up around .965 to .967. That was fun!
73!
Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
------------------------------
Message: 11
Date: Fri, 29 Nov 2013 02:35:57 -0600
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
To: <APBIDDLE@xxxxxxx.xxx>, "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Cc: 'CC' <APBIDDLE@xxxxxx.xxx>
Subject: [amsat-bb] Re: help with satpc32iss
Message-ID: <0bfb01ceecde$073016d0$15904470$@xxx>
Content-Type: text/plain; charset="us-ascii"
Hi Alan
Yes this is the same issue I got no replies.
It has been many months since I tried the ISS version . I also uploaded a
new version of satpc with no joy. The program starts out put a icon on the
tray and then goes away. I have seen this issue with other programs that
can find some other file.
I was hoping other on the list had the same problem.
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Alan
Sent: Thursday, November 28, 2013 5:46 PM
To: 'AMSAT BB'
Cc: CC
Subject: [amsat-bb] Re: help with satpc32iss
Nick,
Have you made any changes which we should know about to diagnose the
problem? You asked about SatPC32ISS earlier. Is this the same problem,
that is, nothing now works?
You could try a restore from the DataBackup program.
73s,
Alan
WA4SCA
<-----Original Message-----
<From: amsat-bb-bounces@xxxxx.xxx
<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nick Pugh K5QXJ
<Sent: Thursday, November 28, 2013 5:11 PM
<To: 'AMSAT BB'
<Subject: [amsat-bb] help with satpc32iss < <I am running xp pro and I
cannot get satpc32 to load any suggestions < < < <nick < < < < < <Thanks <
< < <nick <
<Office 337 593 8700
<
<Cell 337 258 2527
<
<
<
<Helping UL become a world Class Engineering and Educational School < < <
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of <the author.
<Not an AMSAT-NA member? Join now to support the amateur <satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 12
Date: Fri, 29 Nov 2013 07:36:11 -0600
From: "Alan" <APBIDDLE@xxxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Cc: CC <APBIDDLE@xxxxxx.xxx>
Subject: [amsat-bb] Re: help with satpc32iss
Message-ID: <04DA16984C8F4002B33380279C051CE5@xxxxxx>
Content-Type: text/plain; charset="us-ascii"
Nick,
I just tried mine, and it starts fine. Normally the Satpc32 programs are
good with error messages,
though they may be auf Deutsch. Any chance an antivirus program is blocking
it by mistake? I have
had that happen with other programs over the years. Otherwise, nothing to
suggest, except for a
complete backup, removal and reinstall, test the "fresh" version, and then
restore your old data.
Perhaps Erich or someone will have a better answer.
<I was hoping other on the list had the same problem.
Misery loves company? :)
73s,
Alan
WA4SCA
<-----Original Message-----
<From: Nick Pugh K5QXJ [mailto:quadpugh@xxxxxxxxx.xxxx
<Sent: Friday, November 29, 2013 2:36 AM
<To: APBIDDLE@xxxxxxx.xxxx 'AMSAT BB'
<Cc: 'CC'
<Subject: RE: [amsat-bb] Re: help with satpc32iss
<
<Hi Alan
<Yes this is the same issue I got no replies.
<
<It has been many months since I tried the ISS version . I
<also uploaded a
<new version of satpc with no joy. The program starts out put
<a icon on the
<tray and then goes away. I have seen this issue with other
<programs that
<can find some other file.
<
<I was hoping other on the list had the same problem.
<
<
<
<-----Original Message-----
<From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
<Behalf Of Alan
<Sent: Thursday, November 28, 2013 5:46 PM
<To: 'AMSAT BB'
<Cc: CC
<Subject: [amsat-bb] Re: help with satpc32iss
<
<Nick,
<
<Have you made any changes which we should know about to diagnose the
<problem? You asked about SatPC32ISS earlier. Is this the
<same problem,
<that is, nothing now works?
<
<You could try a restore from the DataBackup program.
<
<73s,
<
<Alan
<WA4SCA
<
<
<<-----Original Message-----
<<From: amsat-bb-bounces@xxxxx.xxx
<<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nick Pugh K5QXJ
<<Sent: Thursday, November 28, 2013 5:11 PM
<<To: 'AMSAT BB'
<<Subject: [amsat-bb] help with satpc32iss < <I am running xp pro and I
<cannot get satpc32 to load any suggestions < < < <nick < < <
<< < <Thanks <
<< < <nick <
<<Office 337 593 8700
<<
<<Cell 337 258 2527
<<
<<
<<
<<Helping UL become a world Class Engineering and Educational
<School < < <
<<_______________________________________________
<<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
<<the author.
<<Not an AMSAT-NA member? Join now to support the amateur
<<satellite program!
<<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<<
<
<_______________________________________________
<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
<the author.
<Not an AMSAT-NA member? Join now to support the amateur
<satellite program!
<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
<
<
------------------------------
Message: 13
Date: Fri, 29 Nov 2013 08:22:39 -0600
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] help with the CAPE II sat
Message-ID: <13c801ceed0e$768e37c0$63aaa740$@xxx>
Content-Type: text/plain; charset="us-ascii"
Hi AMSATERS
The CAPE team is having trouble copying the bacon's from out sat below is a
table of our receiver noise with different azimuths notice our system
temperature terminated in a 50 resistor is 367 deg k and when connected to
an antenna ranges from 4000 to 12000 deg k. The noise appears to be white
noise
Question
1. Does this seem reasonable?
2. If the noise is not reasonable how to you go about trouble shooting
it?
3. We are concerned about the gain of our antenna to help us trouble
shoot this question what is the bacon at 145.935 mhz received level on
fundcube-1 what is your antenna gain and what range to the sat did you
observe the receive level?
date
frequency(mkz)
bandwith (hz)
termination (type)
Az (deg)
Ele (deg)
input (dbm)
Tempreture (k)
13 11 29 0500
145.825
7000
50 ohm res
****
***
-134.5
367
145.825
7000
ant #2 KLM
0
0
-122.8
5433
145.825
7000
ant #2 KLM
90
0
-119.1
12736
145.825
7000
ant #2 KLM
180
0
-123.7
4416
145.825
7000
ant #2 KLM
270
0
-125.9
2661
Thanks
nick
Office 337 593 8700
Cell 337 258 2527
Helping UL become a world Class Engineering and Educational School
------------------------------
Message: 14
Date: Fri, 29 Nov 2013 11:02:28 -0700
From: "David W0DHB" <dave@xxxxx.xxx>
To: "'AMSAT-BB'" <AMSAT-BB@xxxxx.xxx>
Subject: [amsat-bb] tle-new.txt
Message-ID: <010a01ceed2d$2b58e380$820aaa80$@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Tle-new.txt is now designating AO-73 as AO-73, not 2013-0066B , ditto
Triton1 and others
------------------------------
Message: 15
Date: Fri, 29 Nov 2013 19:19:28 +0100
From: "Erich Eichmann" <erich.eichmann@xxxxxxxx.xx>
To: <APBIDDLE@xxxxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: help with satpc32iss
Message-ID: <AFE1E1324EA448899372C85D0D78665C@xxxxx>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Alan,
thanks for answering Nicks mail.
I have just sent him an answer offf the list. But I can also only suggest to
run DataBackup or to uninstall/reinstall the program.
73s, Erich, DK1TB
----- Original Message -----
From: "Alan" <APBIDDLE@xxxxxx.xxx>
To: "'AMSAT BB'" <amsat-bb@xxxxx.xxx>
Cc: "CC" <APBIDDLE@xxxxxx.xxx>
Sent: Friday, November 29, 2013 2:36 PM
Subject: [amsat-bb] Re: help with satpc32iss
> Nick,
>
> I just tried mine, and it starts fine. Normally the Satpc32 programs are
> good with error messages,
> though they may be auf Deutsch. Any chance an antivirus program is
> blocking it by mistake? I have
> had that happen with other programs over the years. Otherwise, nothing to
> suggest, except for a
> complete backup, removal and reinstall, test the "fresh" version, and then
> restore your old data.
> Perhaps Erich or someone will have a better answer.
>
> <I was hoping other on the list had the same problem.
>
> Misery loves company? :)
>
> 73s,
>
> Alan
> WA4SCA
>
>
>
> <-----Original Message-----
> <From: Nick Pugh K5QXJ [mailto:quadpugh@xxxxxxxxx.xxxx
> <Sent: Friday, November 29, 2013 2:36 AM
> <To: APBIDDLE@xxxxxxx.xxxx 'AMSAT BB'
> <Cc: 'CC'
> <Subject: RE: [amsat-bb] Re: help with satpc32iss
> <
> <Hi Alan
> <Yes this is the same issue I got no replies.
> <
> <It has been many months since I tried the ISS version . I
> <also uploaded a
> <new version of satpc with no joy. The program starts out put
> <a icon on the
> <tray and then goes away. I have seen this issue with other
> <programs that
> <can find some other file.
> <
> <I was hoping other on the list had the same problem.
> <
> <
> <
> <-----Original Message-----
> <From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
> <Behalf Of Alan
> <Sent: Thursday, November 28, 2013 5:46 PM
> <To: 'AMSAT BB'
> <Cc: CC
> <Subject: [amsat-bb] Re: help with satpc32iss
> <
> <Nick,
> <
> <Have you made any changes which we should know about to diagnose the
> <problem? You asked about SatPC32ISS earlier. Is this the
> <same problem,
> <that is, nothing now works?
> <
> <You could try a restore from the DataBackup program.
> <
> <73s,
> <
> <Alan
> <WA4SCA
> <
> <
> <<-----Original Message-----
> <<From: amsat-bb-bounces@xxxxx.xxx
> <<[mailto:amsat-bb-bounces@xxxxx.xxxx On Behalf Of Nick Pugh K5QXJ
> <<Sent: Thursday, November 28, 2013 5:11 PM
> <<To: 'AMSAT BB'
> <<Subject: [amsat-bb] help with satpc32iss < <I am running xp pro and I
> <cannot get satpc32 to load any suggestions < < < <nick < < <
> << < <Thanks <
> << < <nick <
> <<Office 337 593 8700
> <<
> <<Cell 337 258 2527
> <<
> <<
> <<
> <<Helping UL become a world Class Engineering and Educational
> <School < < <
> <<_______________________________________________
> <<Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
> <<the author.
> <<Not an AMSAT-NA member? Join now to support the amateur
> <<satellite program!
> <<Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> <<
> <
> <_______________________________________________
> <Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of
> <the author.
> <Not an AMSAT-NA member? Join now to support the amateur
> <satellite program!
> <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
> <
> <
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 8, Issue 430
****************************************
Read previous mail | Read next mail
| |
