| |
CX2SA > SATDIG 17.05.13 12:42l 854 Lines 23009 Bytes #999 (0) @ WW
BID : AMSATBB8161
Read: GUEST
Subj: AMSAT-BB-digest V8 161
Path: IZ3LSV<IK2XDE<ON4HU<CX2SA
Sent: 130517/1041Z @:CX2SA.SAL.URY.SA #:6319 [Salto] FBB7.00e $:AMSATBB8161
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. (no subject) (Frank Staffa Jr.)
2. (no subject) (Frank Staffa Jr.)
3. Re: Help Regarding working of RCI SE (Aayush Yadav)
4. Re: Help Regarding working of RCI SE (Nitin Muttin)
5. Kepler Reaction Wheel Problems (B J)
6. Re: Help Regarding working of RCI SE (Greg D)
7. Dream Chaser At Dryden For Tests (B J)
8. 1963-05-15/16: Last Mercury Flight (B J)
9. Re: Help Regarding working of RCI SE (Aayush Yadav)
10. Re: Help Regarding working of RCI SE (Aayush Yadav)
11. Re: Help Regarding working of RCI SE (Nitin Muttin)
12. Re: Help Regarding working of RCI SE (Aayush Yadav)
13. Re: Help Regarding working of RCI SE (Nitin Muttin)
----------------------------------------------------------------------
Message: 1
Date: Thu, 16 May 2013 13:29:16 -0700 (PDT)
From: "Frank Staffa Jr." <kb2cwn@xxxxx.xxx>
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] (no subject)
Message-ID:
<1368736156.85160.YahooMailClassic@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=us-ascii
Thanks Tom, you described it correct. Just like an HF DX pileup, but fun
nonetheless. I will one day get an all mode VHF/UHF transceiver to get on
the other satellites, but also need a different antenna setup unless I run
QRP. Any input on running a Yaesu FT 817nd or an 857d on the SSB satellites?
I can use the Arrow only with low power because of the duplexer unless I get
a different duplexer that can handle more power or do without it completely.
Really don't want to put up an extravagant satellite antenna system on the
property right now. Maybe in a few years after retirement.
------------------------------
Message: 2
Date: Thu, 16 May 2013 14:11:28 -0700 (PDT)
From: "Frank Staffa Jr." <kb2cwn@xxxxx.xxx>
To: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] (no subject)
Message-ID:
<1368738688.22008.YahooMailClassic@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Wow Patrick, Thanks for all the great advise! I will surely check out your
youtube videos. For the years I have been a ham, I only did HF and of course
VHF/UHF FM. I never ventured beyond that level. I just recently got active
on 6 meters and purchased a used IC706 and a Diamond 2 elem yagi for 6. My
mistake, I should have got a IC706 MKII, so I would have had 440 capability
also.. Live and learn! ?But really appreciate the advise and I am really
looking forward to venture out with this!Best 73KB2CWNFlorida
------------------------------
Message: 3
Date: Fri, 17 May 2013 03:16:33 +0530
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<CALRS4DwCbe6z9zMKx1oNvWJo_TYo4V1PhYo=+9acpqn8qLou6w@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Nitin,
nope actualy i am using it on the LPT port on my PC.
and most probably i guess the problem is somewhere in my configuring the
antenna with it.
Aayush
On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin <vu3tyg@xxxxx.xx.xx> wrote:
>
> Aayush,
>
> Are you using this with the centronics port on your PC.
>
> 73
> Nitin [VU3TYG]
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 4
Date: Fri, 17 May 2013 10:52:39 +0800 (SGT)
From: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
To: Aayush Yadav <aayushyadav825@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<1368759159.4503.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Aayush,
?
ok noted. Centronics = LPT or parallel port
?
Can you provide more information.
?
1. which tracking application you are using.
2. DDE Driver
3. Have you confirmed the parallel port is working fine.
?
73
Nitin [VU3TYG]
________________________________
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Sent: Friday, 17 May 2013 3:16 AM
Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
Nitin,
nope actualy i am using it on the LPT port on my PC.
and most probably i guess the problem is somewhere in my configuring the
antenna with it.
Aayush
On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin <vu3tyg@xxxxx.xx.xx> wrote:
?
>Aayush,
>?
>Are you using this with?the centronics port on your PC.
>?
>73
>Nitin [VU3TYG]
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
------------------------------
Message: 5
Date: Fri, 17 May 2013 04:02:52 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Kepler Reaction Wheel Problems
Message-ID:
<CAP7QzkPS10iCmpGEK3H_0s9trAnLuGCoNJT1nGqPW7g+SxheLQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
http://spacecoalition.com/blog/nasa/keplers-planet-search-encounters-problem
http://www.sciencenews.org/view/generic/id/350445/description/Kepler_mission_m
ay_be_over
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 6
Date: Thu, 16 May 2013 21:03:20 -0700
From: Greg D <ko6th.greg@xxxxx.xxx>
To: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID: <5195AC08.4080003@xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1; format=flowed
BIOS setting? On most PCs, the parallel port can be configured in one
of 3 modes. You might try the other settings...
Greg KO6TH
Nitin Muttin wrote:
> Aayush,
>
> ok noted. Centronics = LPT or parallel port
>
> Can you provide more information.
>
> 1. which tracking application you are using.
> 2. DDE Driver
> 3. Have you confirmed the parallel port is working fine.
>
> 73
> Nitin [VU3TYG]
>
>
> ________________________________
> From: Aayush Yadav<aayushyadav825@xxxxx.xxx>
> To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
> Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxx.xxx>
> Sent: Friday, 17 May 2013 3:16 AM
> Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>
>
>
> Nitin,
>
> nope actualy i am using it on the LPT port on my PC.
> and most probably i guess the problem is somewhere in my configuring the
antenna with it.
>
> Aayush
>
>
>
>
> On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx> wrote:
>
>
>> Aayush,
>>
>> Are you using this with the centronics port on your PC.
>>
>> 73
>> Nitin [VU3TYG]
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 7
Date: Fri, 17 May 2013 04:04:37 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Dream Chaser At Dryden For Tests
Message-ID:
<CAP7QzkMrKPJYQ_gMsosZp_7kHR7sk1L=6EOBE1fx=-ZLy4C-Kg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
http://www.nasa.gov/multimedia/podcasting/snc-arrive-dryden.html
http://spacecoalition.com/blog/winged-dream-chaser-prepares-for-first-flight-t
est
http://www.nasa.gov/home/hqnews/2013/may/HQ_13-143_Dream_Chaser_NASA_Testing.h
tml
73s
Bernhard VA6BMJ @ DO33FL
------------------------------
Message: 8
Date: Fri, 17 May 2013 04:10:19 +0000
From: B J <va6bmj@xxxxx.xxx>
To: amsat-bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] 1963-05-15/16: Last Mercury Flight
Message-ID:
<CAP7QzkOiNHVNEn-Da0rVvX0nDqQXkH7YkRW_aiQpMOs=-aVm1g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
http://www.americaspace.com/?p=19291
http://www.americaspace.com/?p=19294
73s
Bernhard VA6BMj @ DO33FL
------------------------------
Message: 9
Date: Fri, 17 May 2013 12:08:14 +0430
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Greg D <ko6th.greg@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<CALRS4Dzc4w_vCw9t976BMsJXcx0nBEg_EqGyBEswj6_hFhJnNg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Nitin,
I am currently working on Nova for Windows but first i am concentrating on
moving the antenna manually
using ARSWIN.
And we have confirmed that the parallel port and the connecting cable are
perfectly fine.
Aayush
On Fri, May 17, 2013 at 8:33 AM, Greg D <ko6th.greg@xxxxx.xxx> wrote:
> BIOS setting? On most PCs, the parallel port can be configured in one of
> 3 modes. You might try the other settings...
>
> Greg KO6TH
>
>
> Nitin Muttin wrote:
>
>> Aayush,
>> ok noted. Centronics = LPT or parallel port
>> Can you provide more information.
>> 1. which tracking application you are using.
>> 2. DDE Driver
>> 3. Have you confirmed the parallel port is working fine.
>> 73
>> Nitin [VU3TYG]
>>
>>
>> ______________________________**__
>>
>> From: Aayush Yadav<aayushyadav825@xxxxx.xxxxx>
>> To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
>> Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxxxx.xxx <amsat-bb@xxxxx.xxx>>
>> Sent: Friday, 17 May 2013 3:16 AM
>> Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>>
>>
>>
>> Nitin,
>>
>> nope actualy i am using it on the LPT port on my PC.
>> and most probably i guess the problem is somewhere in my configuring the
>> antenna with it.
>>
>> Aayush
>>
>>
>>
>>
>> On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx> wrote:
>>
>>
>> Aayush,
>>> Are you using this with the centronics port on your PC.
>>> 73
>>> Nitin [VU3TYG]
>>> ______________________________**_________________
>>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>>> program!
>>> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>>>
>>> ______________________________**_________________
>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>>
>
------------------------------
Message: 10
Date: Fri, 17 May 2013 12:09:33 +0430
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Greg D <ko6th.greg@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<CALRS4DzZRmNKbdP5pS0oiTYeMh25pS_LVpSv1LZDRaBTs5wrsg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
Greg,
I ve checked for those settings. But nothing changed..
Aayush
On Fri, May 17, 2013 at 12:08 PM, Aayush Yadav
<aayushyadav825@xxxxx.xxx>wrote:
> Nitin,
>
> I am currently working on Nova for Windows but first i am concentrating on
> moving the antenna manually
> using ARSWIN.
>
> And we have confirmed that the parallel port and the connecting cable are
> perfectly fine.
>
> Aayush
>
>
> On Fri, May 17, 2013 at 8:33 AM, Greg D <ko6th.greg@xxxxx.xxx> wrote:
>
>> BIOS setting? On most PCs, the parallel port can be configured in one of
>> 3 modes. You might try the other settings...
>>
>> Greg KO6TH
>>
>>
>> Nitin Muttin wrote:
>>
>>> Aayush,
>>> ok noted. Centronics = LPT or parallel port
>>> Can you provide more information.
>>> 1. which tracking application you are using.
>>> 2. DDE Driver
>>> 3. Have you confirmed the parallel port is working fine.
>>> 73
>>> Nitin [VU3TYG]
>>>
>>>
>>> ______________________________**__
>>>
>>> From: Aayush Yadav<aayushyadav825@xxxxx.xxxxx>
>>> To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
>>> Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxxxx.xxx <amsat-bb@xxxxx.xxx>>
>>> Sent: Friday, 17 May 2013 3:16 AM
>>> Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>>>
>>>
>>>
>>> Nitin,
>>>
>>> nope actualy i am using it on the LPT port on my PC.
>>> and most probably i guess the problem is somewhere in my configuring the
>>> antenna with it.
>>>
>>> Aayush
>>>
>>>
>>>
>>>
>>> On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx>
>>> wrote:
>>>
>>>
>>> Aayush,
>>>> Are you using this with the centronics port on your PC.
>>>> 73
>>>> Nitin [VU3TYG]
>>>> ______________________________**_________________
>>>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the
>>>> author.
>>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>>>> program!
>>>> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>>>>
>>>> ______________________________**_________________
>>> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>> Not an AMSAT-NA member? Join now to support the amateur satellite
>>> program!
>>> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>>>
>>
>
------------------------------
Message: 11
Date: Fri, 17 May 2013 16:39:23 +0800 (SGT)
From: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
To: Aayush Yadav <aayushyadav825@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<1368779963.43510.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Aayush,
?
Are you using a PCI card with LPT port.
?
73
Nitin [VU3TYG]
________________________________
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Greg D <ko6th.greg@xxxxx.xxx>
Cc: Nitin Muttin <vu3tyg@xxxxx.xx.xx>; "amsat-bb@xxxxx.xxxx
<amsat-bb@xxxxx.xxx>
Sent: Friday, 17 May 2013 1:08 PM
Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
Nitin,
?
I am currently working on Nova for Windows but first i am concentrating on
moving the antenna manually
using ARSWIN.
And we have confirmed that the parallel port and the connecting cable are
perfectly fine.
Aayush
On Fri, May 17, 2013 at 8:33 AM, Greg D <ko6th.greg@xxxxx.xxx> wrote:
BIOS setting? ?On most PCs, the parallel port can be configured in one of 3
modes. ?You might try the other settings...
>
>Greg ?KO6TH
>
>
>Nitin Muttin wrote:
>
>Aayush,
>>? ok noted. Centronics = LPT or parallel port
>>? Can you provide more information.
>>? 1. which tracking application you are using.
>>2. DDE Driver
>>3. Have you confirmed the parallel port is working fine.
>>? 73
>>Nitin [VU3TYG]
>>
>>
>>________________________________
>>
>>From: Aayush Yadav<aayushyadav825@xxxxx.xxx>
>>To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
>>Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxx.xxx>
>>Sent: Friday, 17 May 2013 3:16 AM
>>Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>>
>>
>>
>>Nitin,
>>
>>nope actualy i am using it on the LPT port on my PC.
>>and most probably i guess the problem is somewhere in my configuring the
antenna with it.
>>
>>Aayush
>>
>>
>>
>>
>>On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx> ?wrote:
>>
>>
>>
>>Aayush,
>>>? Are you using this with the centronics port on your PC.
>>>? 73
>>>Nitin [VU3TYG]
>>>_______________________________________________
>>>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>>
>>>_______________________________________________
>>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>
------------------------------
Message: 12
Date: Fri, 17 May 2013 13:15:28 +0430
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<CALRS4DxS-AM=vexFwNPPgrVdmYTw1gq85JjLobEazMGgHgNDuw@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1
nitin,
yes i am
Aayush
On Fri, May 17, 2013 at 1:09 PM, Nitin Muttin <vu3tyg@xxxxx.xx.xx> wrote:
> Aayush,
>
> Are you using a PCI card with LPT port.
>
> 73
> Nitin [VU3TYG]
>
> *From:* Aayush Yadav <aayushyadav825@xxxxx.xxx>
> *To:* Greg D <ko6th.greg@xxxxx.xxx>
> *Cc:* Nitin Muttin <vu3tyg@xxxxx.xx.xx>; "amsat-bb@xxxxx.xxxx <
> amsat-bb@xxxxx.xxx>
> *Sent:* Friday, 17 May 2013 1:08 PM
>
> *Subject:* Re: [amsat-bb] Re: Help Regarding working of RCI SE
>
> Nitin,
>
> I am currently working on Nova for Windows but first i am concentrating on
> moving the antenna manually
> using ARSWIN.
>
> And we have confirmed that the parallel port and the connecting cable are
> perfectly fine.
>
> Aayush
>
>
> On Fri, May 17, 2013 at 8:33 AM, Greg D <ko6th.greg@xxxxx.xxx> wrote:
>
> BIOS setting? On most PCs, the parallel port can be configured in one of
> 3 modes. You might try the other settings...
>
> Greg KO6TH
>
>
> Nitin Muttin wrote:
>
> Aayush,
> ok noted. Centronics = LPT or parallel port
> Can you provide more information.
> 1. which tracking application you are using.
> 2. DDE Driver
> 3. Have you confirmed the parallel port is working fine.
> 73
> Nitin [VU3TYG]
>
>
> ______________________________**__
>
> From: Aayush Yadav<aayushyadav825@xxxxx.xxxxx>
> To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
> Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxxxx.xxx <amsat-bb@xxxxx.xxx>>
> Sent: Friday, 17 May 2013 3:16 AM
> Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>
>
>
> Nitin,
>
> nope actualy i am using it on the LPT port on my PC.
> and most probably i guess the problem is somewhere in my configuring the
> antenna with it.
>
> Aayush
>
>
>
>
> On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx> wrote:
>
>
> Aayush,
> Are you using this with the centronics port on your PC.
> 73
> Nitin [VU3TYG]
> ______________________________**_________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>
> ______________________________**_________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings:
http://amsat.org/mailman/**listinfo/amsat-bb<http://amsat.org/mailman/listinfo
/amsat-bb>
>
>
>
>
>
------------------------------
Message: 13
Date: Fri, 17 May 2013 18:34:21 +0800 (SGT)
From: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
To: Aayush Yadav <aayushyadav825@xxxxx.xxx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Help Regarding working of RCI SE
Message-ID:
<1368786861.34994.YahooMailNeo@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
There is a DLL update required for ARSWIN to talk to the PCI card and also
you will need to put in the PCI card I/O range in ARSWIN (looks like it
defaults to the legacy IO of 378 or 3BC). I will check this on my PC and let
u know. I assume there is no issue with the controller.
?http://www.ea4tx.com/support/FAQ9.htm?
?
73
Nitin [VU3TYG]
________________________________
From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
To: Nitin Muttin <vu3tyg@xxxxx.xx.xx>
Cc: "amsat-bb@xxxxx.xxxx <amsat-bb@xxxxx.xxx>
Sent: Friday, 17 May 2013 2:15 PM
Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
nitin,
yes i am
Aayush
On Fri, May 17, 2013 at 1:09 PM, Nitin Muttin <vu3tyg@xxxxx.xx.xx> wrote:
Aayush,
>?
>Are you using a PCI card with LPT port.
>?
>73
>Nitin [VU3TYG]
>
>
>From: Aayush Yadav <aayushyadav825@xxxxx.xxx>
>To: Greg D <ko6th.greg@xxxxx.xxx>
>Cc: Nitin Muttin <vu3tyg@xxxxx.xx.xx>; "amsat-bb@xxxxx.xxxx
<amsat-bb@xxxxx.xxx>
>Sent: Friday, 17 May 2013 1:08 PM
>
>Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>
>
>
>Nitin,
>?
>I am currently working on Nova for Windows but first i am concentrating on
moving the antenna manually
>using ARSWIN.
>
>And we have confirmed that the parallel port and the connecting cable are
perfectly fine.
>
>Aayush
>
>
>
>
>On Fri, May 17, 2013 at 8:33 AM, Greg D <ko6th.greg@xxxxx.xxx> wrote:
>
>BIOS setting? ?On most PCs, the parallel port can be configured in one of 3
modes. ?You might try the other settings...
>>
>>Greg ?KO6TH
>>
>>
>>Nitin Muttin wrote:
>>
>>Aayush,
>>>? ok noted. Centronics = LPT or parallel port
>>>? Can you provide more information.
>>>? 1. which tracking application you are using.
>>>2. DDE Driver
>>>3. Have you confirmed the parallel port is working fine.
>>>? 73
>>>Nitin [VU3TYG]
>>>
>>>
>>>________________________________
>>>
>>>From: Aayush Yadav<aayushyadav825@xxxxx.xxx>
>>>To: Nitin Muttin<vu3tyg@xxxxx.xx.xx>
>>>Cc: "amsat-bb@xxxxx.xxxx<xxxxxxxx@xxxxx.xxx>
>>>Sent: Friday, 17 May 2013 3:16 AM
>>>Subject: Re: [amsat-bb] Re: Help Regarding working of RCI SE
>>>
>>>
>>>
>>>Nitin,
>>>
>>>nope actualy i am using it on the LPT port on my PC.
>>>and most probably i guess the problem is somewhere in my configuring the
antenna with it.
>>>
>>>Aayush
>>>
>>>
>>>
>>>
>>>On Thu, May 16, 2013 at 4:46 PM, Nitin Muttin<vu3tyg@xxxxx.xx.xx> ?wrote:
>>>
>>>
>>>
>>>Aayush,
>>>>? Are you using this with the centronics port on your PC.
>>>>? 73
>>>>Nitin [VU3TYG]
>>>>_______________________________________________
>>>>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>>>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>>>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>>>
>>>>_______________________________________________
>>>Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
>>>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>>>Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>>>
>
>
>
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 8, Issue 161
****************************************
Read previous mail | Read next mail
| |
