| |
CX2SA > SATDIG 10.01.13 22:14l 195 Lines 5926 Bytes #999 (0) @ WW
BID : AMSATBB810
Read: GUEST
Subj: AMSAT-BB-digest V8 10
Path: IZ3LSV<IK2XDE<PY1AYH<PY1AYH<CX2SA
Sent: 130110/2006Z @:CX2SA.SAL.URY.SA #:2128 [Salto] FBB7.00e $:AMSATBB810
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. here's a good one! (Bob- W7LRD)
2. Sunita Williams KD5PLB tour of ISS video (Trevor .)
3. Re: here's a good one! (George Henry)
4. icom AG-25 schematic (Bob- W7LRD)
5. Re: icom AG-25 schematic (Ted)
6. new station cn87 (KERRY LA*DUKE)
----------------------------------------------------------------------
Message: 1
Date: Wed, 9 Jan 2013 21:55:28 +0000 (UTC)
From: Bob- W7LRD <w7lrd@xxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] here's a good one!
Message-ID:
<824953228.133318.1357768528753.JavaMail.root@xxxxxxx.xxxxxxxxxx.xx.xxxx.xxxxx
xx.xxx>
Content-Type: text/plain; charset=utf-8
Getting ready for a AO-7A pass, started keying the transmitter, I noticed
the computer monitor was blinking very nicely in time with the cw, also the
az and el indicators on the G5500 control unit were dancing around in tune
with the cw. In fact they danced in tune even with the power off. Tipped
over satellite tower, got out ohm meter, direct open through the 2M Icom
AG-25 preamp. Jumped around the now removed preamp and we're back in
business. Question...The relay contacts seem to be suspect. Should I get
parts and repair the AG-25 or get a better preamp, as I am going to scratch
some EME efforts off my bucket list. If you have a better 2M preamp "laying
" around let me know.
as always
73 Bob W7LRD
------------------------------
Message: 2
Date: Wed, 9 Jan 2013 22:12:07 +0000 (GMT)
From: "Trevor ." <m5aka@xxxxx.xx.xx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Sunita Williams KD5PLB tour of ISS video
Message-ID:
<1357769527.3212.YahooMailClassic@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
I've only just run across this video made by ISS Commander Sunita Williams
KD5PLB, see
http://www.youtube.com/watch?v=doN4t5NKW-k
73 Trevor M5AKA
----
------------------------------
Message: 3
Date: Wed, 9 Jan 2013 14:33:17 -0800 (PST)
From: George Henry <ka3hsw@xxx.xxx>
To: Bob- W7LRD <w7lrd@xxxxxxx.xxx>, amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: here's a good one!
Message-ID:
<1357770797.17363.YahooMailRC@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
I'd say?since the relays are plentiful and relatively cheap ($36 OBO, seller
henryradio (no connection)) on eBay, it'd make sense to repair it.? If a good
deal on a better preamp comes along, you could always sell it...
George, KA3HSW
----- Original Message ----
> From: Bob- W7LRD <w7lrd@xxxxxxx.xxx>
> To: amsat-bb@xxxxx.xxx
> Sent: Wed, January 9, 2013 4:05:35 PM
> Subject: [amsat-bb] here's a good one!
>
> Getting ready for a AO-7A pass, started keying the transmitter, I noticed
the
>computer monitor was blinking very nicely in time with the cw, also the az
and
>el indicators on the G5500 control unit were dancing around in tune with
the cw.
>In fact they danced in tune even with the power off. Tipped over satellite
>tower, got out ohm meter, direct open through the 2M Icom AG-25 preamp.
Jumped
>around the now removed preamp and we're back in business. Question...The
relay
>contacts seem to be suspect. Should I get parts and repair the AG-25 or get a
>better preamp, as I am going to scratch some EME efforts off my bucket
list. If
>you have a better 2M preamp "laying " around let me know.
>
> as always
> 73 Bob W7LRD
------------------------------
Message: 4
Date: Wed, 9 Jan 2013 22:37:50 +0000 (UTC)
From: Bob- W7LRD <w7lrd@xxxxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] icom AG-25 schematic
Message-ID:
<411360023.134316.1357771070098.JavaMail.root@xxxxxxx.xxxxxxxxxx.xx.xxxx.xxxxx
xx.xxx>
Content-Type: text/plain; charset=utf-8
anyone have or can aim me to a AG-25 schematic? I called Icom (5 mi. up the
road) they don't have one? Go figure!
73 Bob W7LRD
------------------------------
Message: 5
Date: Wed, 9 Jan 2013 14:58:30 -0800
From: "Ted" <k7trkradio@xxxxxxx.xxx>
To: "'Bob- W7LRD'" <w7lrd@xxxxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: icom AG-25 schematic
Message-ID: <000301cdeebc$d8342210$889c6630$@xxx>
Content-Type: text/plain; charset="us-ascii"
Bob, quick internet search says this:
You can download the AG-25 manual / schematic from Icom Global Support page,
BUT You will first have to request the file
http://www.icom.co.jp/world/support/
MODS.DK has the AG-25 manuals on file
http://www.mods.dk/manual.php?brand=icom
I did not try these links
GL, K7TRK
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Bob- W7LRD
Sent: Wednesday, January 09, 2013 2:38 PM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] icom AG-25 schematic
anyone have or can aim me to a AG-25 schematic? I called Icom (5 mi. up the
road) they don't have one? Go figure!
73 Bob W7LRD
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 6
Date: Thu, 10 Jan 2013 09:14:11 -0700
From: KERRY LA*DUKE <kladuke1144@xxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] new station cn87
Message-ID: <BAY171-DS2543207D63DAFF50DB93B7BC2A0@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
All,
Had a great qso and first contact for WA7GNP this morning on SO-50. Jarred
is running a Kenwood TH-F6A and home brew yagi's on a tripod. Jarred has
also been listening on the analog birds.
73
WC7V
Kerry
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 8, Issue 10
***************************************
Read previous mail | Read next mail
| |
