| |
CX2SA > SATDIG 30.12.11 21:08l 111 Lines 3692 Bytes #999 (0) @ WW
BID : AMSATBB6699
Read: GUEST
Subj: AMSAT-BB-digest V6 699
Path: IZ3LSV<IK6ZDE<VE3UIL<VE9MPF<CX2SA
Sent: 111230/2004Z @:CX2SA.SAL.URY.SA #:45259 [Salto] FBB7.00e $:AMSATBB6699
From: CX2SA@CX2SA.SAL.URY.SA
To : SATDIG@WW
Today's Topics:
1. Re: MMSSTV and ARRISat-1 (Zachary Beougher)
----------------------------------------------------------------------
Message: 1
Date: Fri, 30 Dec 2011 14:57:31 -0500
From: "Zachary Beougher" <zack.kd8ksn@xxxxxxx.xxx>
To: "kp hpjr" <inservice2him@xxxxxxx.xxx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: MMSSTV and ARRISat-1
Message-ID: <SNT111-DS5C3FD0E1BCED394A4AFDBB3920@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
I had a similar issue when I first started downloading SSTV, and if I recall
correctly I believe it was because I had the input audio set way too high (I
cranked it down to just about no audio to get a clear pic). If you have
downloaded pictures before from HF and have had success at your preset audio
levels, then I doubt that is the issue.
Zack
KD8KSN
From: kp hpjr
Sent: Friday, December 30, 2011 2:41 PM
To: zack.kd8ksn@xxxxxxx.xxx ; amsat-bb@xxxxx.xxx
Subject: RE: [amsat-bb] Re: MMSSTV and ARRISat-1
Zack and others.
Yes, audio feed is direct as with all digi modes I operate.
Just had a pass of ARRISat-1 of 45 degrees plus over head. The downlink into
my M2 5 element yagi @ 35 degrees elevation was S-9 plus 10db. A very good
(great) signal.
2 times during the pass the SSTV was transmitted. During neither of them did
the program initialize and copy anything. Partway through the 2nd
transmission I forced it into RX Robot-36. All that occured was for it to
stop after about 5 seconds. Again nothing decoded....frustrating to say the
least. I'd like to get 1 photo...HI.
Using the exact same setting I have had several QSO's now on HF sending and
receiving very clear photos.
Not sure what else to try.
N0KK, Kirk
> From: zack.kd8ksn@xxxxxxx.xxx
> To: inservice2him@xxxxxxx.xxxx amsat-bb@xxxxx.xxx
> Date: Fri, 30 Dec 2011 07:48:57 -0500
> Subject: [amsat-bb] Re: MMSSTV and ARRISat-1
>
> Hi Kirk,
>
> Like Greg said, ARRISat-1 is Robot 36. I also found that I received the
> clearest pictures when I ran the audio directly into the pc versus letting
> it pickup the audio from a speaker. I imagine you are probably already
> doing this.
>
> 73!
>
> Zack
> KD8KSN
>
> -----Original Message-----
> From: kp hpjr
> Sent: Wednesday, December 28, 2011 4:35 PM
> To: amsat-bb@xxxxx.xxx
> Subject: [amsat-bb] MMSSTV and ARRISat-1
>
>
> GA,
> All the talk about SSTV from this bird got me thinking I'd like to try!
> I downloaded MMSSTV and installed.
> What are the best settings to use in the setup page for decent copy of
> photos from ARRISAT-1?
> I did copy pix on 14.230 after setup as a test run...but on last pass of
> ARRISAT, had wonderful copy of voice beacon but no pictures decoded.
> So wonder what I might be doing wrong.
> Any help appreciated.
> Kirk, N0KK
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 6, Issue 699
****************************************
Read previous mail | Read next mail
| |
