|
CX2SA > SATDIG 13.10.11 21:15l 672 Lines 17043 Bytes #999 (0) @ WW
BID : AMSATBB6567
Read: GUEST
Subj: AMSAT-BB-digest V6 567
Path: IZ3LSV<IW0QNL<VE2PKT<F1BBI<CX2SA
Sent: 111013/1910Z @:CX2SA.LAV.URY.SA #:32290 [Minas] FBB7.00e $:AMSATBB6567
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Today's Topics:
1. Fw: SatPc32 kepler Data (Howard Kowall)
2. SRMSAT CW Heard (Mineo Wakita)
3. Qsl Cards (Kevin Deane)
4. JUGNU & SRMVU (PY5LF)
5. Jugnu and SRMVU keps--maybe ;) (Mark L. Hammond)
6. Which preamp to buy for 2m? (Tim Goodrich)
7. Re: Which preamp to buy for 2m? (Martin =?iso-8859-1?Q?M=F8ller?=)
8. Re: Which preamp to buy for 2m? (ka9qjg)
9. Oscarlocator (Rich Dailey)
10. Re: PSLV C-18 Launch successful (Nick Pugh K5QXJ)
11. SRMVU Telemetry (Carl Rimmer W8KRF)
12. Horyu-2 437.375 MHz - November ? (Trevor .)
13. [amsat-bb]
HudsonValleySatcomGroupNetTonightOct15@xxxxxxxxxxxxxxxxxxxxxxxxx@xxxxxxx
(cotejaune2@xxx.xxxx
14. Re: Which preamp to buy for 2m? (Stephen E. Belter)
15. SRMVU Entire Pass Vedio Clip ! (Nader Omer)
16. Re: Horyu-2 437.375 MHz - November ? (Masahiro Arai)
----------------------------------------------------------------------
Message: 1
Date: Wed, 12 Oct 2011 16:11:49 -0500
From: "Howard Kowall" <hkowall@xxxx.xx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fw: SatPc32 kepler Data
Message-ID: <001901cc8923$8ec55720$6a01a8c0@xxxxxxxxx>
Content-Type: text/plain; charset="iso-8859-1"
Just a small thanks to all who replied to the above subject.
Sorry I am little late getting here
I did find the folder and all is great.
I have always found this bbs very helpful and I can always count on good
answers on here.
Thanks again all
Howard
VE4ISP
----- Original Message -----
From: Howard Kowall
To: amsat-bb@xxxxx.xxx
Sent: Tuesday, October 11, 2011 2:49 PM
Subject: SatPc32 kepler Data
Hello all
I have an older laptop that has no internet connection,I run Satpc32 on my
main computer that has internet connection and I am able to update the
kepler data.I want to use the kepler data from my main computer,and copy it
to my laptop via USB flash drive.I cant seem to find the kepler folder in
the SatPc32 folder.Has anyone one shared the kepler data.
Thanks to all who read and reply in advance
Howard
VE4ISP
------------------------------
Message: 2
Date: Thu, 13 Oct 2011 06:11:12 +0900
From: "Mineo Wakita" <ei7m-wkt@xxxxxxxxx.xx.xx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] SRMSAT CW Heard
Message-ID: <000301cc8923$7fc79a30$0300a8c0@xxxxxxxxxxxxxx>
Content-Type: text/plain; format=flowed; charset="iso-2022-jp";
reply-type=original
I heard SRMSAT CW signal. I found a word like ...SRMVU...
20:27-20:39UTC, 12 Oct 2011, Ele 9 S-SE, 437.425MHz CW
...PXCSRMVUCZZPXCSRV...
SRMVU
1 55555U 11072A 11285.24558449 .00001106 00000-0 60777-3 0 1231
2 55555 19.9698 66.2533 0014244 344.0462 200.8483 14.10647952 17
JE9PEL, Mineo Wakita
------------------------------
Message: 3
Date: Wed, 12 Oct 2011 15:37:13 -0700
From: Kevin Deane <summit496@xxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Qsl Cards
Message-ID: <COL107-W27A71F607FFA963E1FD64E83E30@xxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"
Does the person who sent me a big green SASE remember, because there were
two stacks that went out from Cali and it was in one of them, so I was
wondering if the person did receive it back or not. Reason being there might
be more than one person who did not get any cards from Elko or Cali. Not
worried about postage or cards just that it bothers me that people did not
get what I had sent.
So please let me know if you did not receive cards from any occasion and I
will be glad to resnd given the info.
Kevin
KF7MYK
------------------------------
Message: 4
Date: Wed, 12 Oct 2011 22:36:00 -0300
From: "PY5LF" <py5lf@xxxxxxxxxxxxx.xxx.xx>
To: <AMSAT-BB@xxxxx.xxx>, <sat-fm@xxxxxxxxxxx.xxx.xx>
Subject: [amsat-bb] JUGNU & SRMVU
Message-ID: <001201cc8948$775b1410$66113c30$@xxx.xx>
Content-Type: text/plain; charset="us-ascii"
Hi
Signal of JUGNU and SRMVU a few minutes ago over GG54 ;
http://www.youtube.com/watch?v=FqZAphQSmXA
73
PY5LF
LUCIANO FABRICIO
Curitiba-PR-Brazil GG54jm
<http://www.qrz.com/db/py5lf> http://www.qrz.com/db/py5lf
------------------------------
Message: 5
Date: Wed, 12 Oct 2011 21:36:13 -0400
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
To: "amsat-bb" <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Jugnu and SRMVU keps--maybe ;)
Message-ID: <k1cD1h00G4ltuWb051cD8U@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Probably these, based on launch date:
OBJECT B
1 37839U 11058B 11285.77528725 .00000264 00000-0 00000+0 0 21
2 37839 019.9805 063.0497 0013045 346.8872 013.2366 14.10339799 89
OBJECT D
1 37841U 11058D 11285.77537062 .00000264 00000-0 00000+0 0 28
2 37841 019.9743 063.0392 0012167 345.0078 015.0473 14.10074916 86
They match closely to the other ones posted--but about 1-2 mins off.
User beware ;)
73!
Mark L. Hammond [N8MH]
------------------------------
Message: 6
Date: Wed, 12 Oct 2011 23:04:20 -0700
From: "Tim Goodrich" <tim@xxxxxxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Which preamp to buy for 2m?
Message-ID: <017401cc896d$f35423c0$d9fc6b40$@xxx>
Content-Type: text/plain; charset="us-ascii"
Hi all,
I just got a M2 2M4 and 420-50-11 to mount on my az/el rotor and go with my
736R. As I'm hoping to potentially work some EME with the big guns when
conditions are just right, I'm wondering if anyone can provide advice on
which preamp to get for 2m. I live in the Los Angeles metro area, so lots of
noise/QRM, and also would like something to take advantage of the 736's
preamp switch/voltage over coax option. In other words, something that
doesn't require any complicated power/switching controls, if possible.
Any suggestions?
Thanks,
Tim
K6TW
------------------------------
Message: 7
Date: Thu, 13 Oct 2011 08:31:20 +0200
From: "Martin =?iso-8859-1?Q?M=F8ller?=" <tmm@xxxxxxx.xx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Which preamp to buy for 2m?
Message-ID: <WC20111013063120.380046@xxxxxxx.xx>
Content-Type: text/plain; charset="iso-8859-1"
Hi Tim and group
May I suggest that you get a hold on a preamp from SSB-electronics.
I myself am using the SP-2000, and I'm happily satisfied with what it does.
Wiring is as simple as can be. Power is fed over the coax-line and it can
switch via rf-sensing up to about 200W, so if you don't run any big PA's
then you should be going with just that.
However, I do not know enough about where to buy them outside europe, so
can't help you on that one.
Hope you could use the information given.
Regards
Martin, OZ1TMM
-----Original Message-----
From: "Tim Goodrich" <tim@xxxxxxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Date: Wed, 12 Oct 2011 23:04:20 -0700
Subject: [amsat-bb] Which preamp to buy for 2m?
Hi all,
I just got a M2 2M4 and 420-50-11 to mount on my az/el rotor and go with my
736R. As I'm hoping to potentially work some EME with the big guns when
conditions are just right, I'm wondering if anyone can provide advice on
which preamp to get for 2m. I live in the Los Angeles metro area, so lots of
noise/QRM, and also would like something to take advantage of the 736's
preamp switch/voltage over coax option. In other words, something that
doesn't require any complicated power/switching controls, if possible.
Any suggestions?
Thanks,
Tim
K6TW
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
[http://amsat.org/mailman/listinfo/amsat-bb]
------------------------------
Message: 8
Date: Thu, 13 Oct 2011 01:58:37 -0500
From: "ka9qjg" <ka9qjg@xxxxxx.xxx>
To: "=?iso-8859-1?Q?'Martin_M=F8ller'?=" <tmm@xxxxxxx.xx>
Cc: AMSAT-BB@xxxxx.xxx
Subject: [amsat-bb] Re: Which preamp to buy for 2m?
Message-ID: <010a01cc8975$883b2c20$98b18460$@xxx>
Content-Type: text/plain; charset="iso-8859-1"
I use the Advanced Research Preamp on my 440 and 220 repeater, I know it is
a Different Application But they are good, I Also included a great link to
check on some that may work for you
Good Luck
73 De Don KA9QJG
http://www.advancedreceiver.com/
http://www.dxzone.com/catalog/Technical_Reference/Preamplifiers/
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Martin M?ller
Sent: Thursday, October 13, 2011 1:31 AM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Which preamp to buy for 2m?
Hi Tim and group
May I suggest that you get a hold on a preamp from SSB-electronics.
I myself am using the SP-2000, and I'm happily satisfied with what it does.
Wiring is as simple as can be. Power is fed over the coax-line and it can
switch via rf-sensing up to about 200W, so if you don't run any big PA's
then you should be going with just that.
However, I do not know enough about where to buy them outside europe, so
can't help you on that one.
Hope you could use the information given.
Regards
Martin, OZ1TMM
-----Original Message-----
From: "Tim Goodrich" <tim@xxxxxxxxxxx.xxx>
To: <amsat-bb@xxxxx.xxx>
Date: Wed, 12 Oct 2011 23:04:20 -0700
Subject: [amsat-bb] Which preamp to buy for 2m?
Hi all,
I just got a M2 2M4 and 420-50-11 to mount on my az/el rotor and go with my
736R. As I'm hoping to potentially work some EME with the big guns when
conditions are just right, I'm wondering if anyone can provide advice on
which preamp to get for 2m. I live in the Los Angeles metro area, so lots of
noise/QRM, and also would like something to take advantage of the 736's
preamp switch/voltage over coax option. In other words, something that
doesn't require any complicated power/switching controls, if possible.
Any suggestions?
Thanks,
Tim
K6TW
------------------------------
Message: 9
Date: Thu, 13 Oct 2011 04:17:55 -0400
From: Rich Dailey <redailey1@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Oscarlocator
Message-ID: <7.0.0.16.2.20111013041538.02449f08@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Someone on the list was inquiring about an Oscarlocator a while back.
Just FYI, one is up on ebay. I'm not the seller, just came across it in one
of my searches.
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=370549993740
Rich, N8UX.
------------------------------
Message: 10
Date: Thu, 13 Oct 2011 05:15:49 -0500
From: "Nick Pugh K5QXJ" <quadpugh@xxxxxxxxx.xxx>
To: "'Mani VU2WMY'" <wmy@xxxx.xxx.xx>, <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: PSLV C-18 Launch successful
Message-ID: <0c6901cc8991$15160690$3f4213b0$@xxx>
Content-Type: text/plain; charset="us-ascii"
Copy your sat this am LOS was at 10:07:35 the signal was on 437.421 at LOS
the signal was about 6 db above the noise my qth is Lat 30.1n and 92.1 w I
am using object b to track.
73 and good luck
Nick k5qxj
Mani, VU2WMY
Secretary & Station-In-Charge
Upagrah Amateur Radio Club VU2URC
ISRO Satellite Centre
HAL Aier by reply e-mail and destroy all copies of the original
message.
----------------------------------------------------------------------------
--
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 11
Date: Thu, 13 Oct 2011 08:13:34 -0400
From: Carl Rimmer W8KRF <w8krf@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Cc: kc2yqj@xxxx.xxxx sanjaynekkanti@xxxxx.xxx
Subject: [amsat-bb] SRMVU Telemetry
Message-ID: <4E96D5EE.4090904@xxxxx.xxx>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I was able to copy SRMVU this morning during the 1149UTC pass here at
EN91ck (Cleveland, OH USA). I did notice that the AOS/LOS were off by a
minute or slightly more. Perhaps the Keps will be updated soon. The
signal strength was weak but copyable. A recording was made.
The CW Telemetry: SRMVU C Z Z P P C (this was repeated without change
throughout the entire pass)
--
*Carl W8KRF*
------------------------------
Message: 12
Date: Thu, 13 Oct 2011 15:06:05 +0100 (BST)
From: "Trevor ." <m5aka@xxxxx.xx.xx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Horyu-2 437.375 MHz - November ?
Message-ID:
<1318514765.25869.YahooMailClassic@xxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=utf-8
The 6.7 kg microsatellite Horyu-2, which has an onboard camera, was planned
to launch from Japan in November 2011 with GCOM-W 1, KOMPSat 3, SDS 4.
http://www.amsatuk.me.uk/iaru/finished_detail.php?serialnum=216
Does anyone know if the November date is still valid or has it slipped ?
Horyu website in Google English
http://tinyurl.com/HoryuMicrosat
73 Trevor M5AKA
------------------------------
Message: 13
Date: Thu, 13 Oct 2011 10:18:04 -0400 (EDT)
From: cotejaune2@xxx.xxx
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb]
HudsonValleySatcomGroupNetTonightOct15@xxxxxxxxxxxxxxxxxxxxxxxxx@xxxxxxx
Message-ID: <8CE57CA0E292EF6-1390-1C9BE@xxxxxxxxxxxx.xxxxxx.xxx.xxx>
Content-Type: text/plain; charset="us-ascii"
Hello all. It is time again for the HVSGN tonight on Echolink N2EYH-L @ 8 PM
Eastern or on the MtBeacon ARC repeater 146.970 pl 100. Hope to hear you
there.
73 Gary WA2AQH/Tom KC2DTQ
------------------------------
Message: 14
Date: Thu, 13 Oct 2011 10:19:24 -0400
From: "Stephen E. Belter" <seb@xxxxxx.xxx>
To: Tim Goodrich <tim@xxxxxxxxxxx.xxx>, "amsat-bb@xxxxx.xxxx
<amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Re: Which preamp to buy for 2m?
Message-ID:
<51668A33220E754EABE6583357ECEE2D79CD61B2@xxxxxxxx.xxxxxx.xxxxx>
Content-Type: text/plain; charset="us-ascii"
Tim,
I own SSB preamps, the SP-2000 (2 meter) and SP-7000 (70 cm). From Array Solutions, www.arraysolutions.com
4. From Universal Radio, www.universal-radio.com
73, Steve N9IP
--
-----Original Message-----
From: amsat-bb-bounces@xxxxx.xxx [mailto:amsat-bb-bounces@xxxxx.xxxx On
Behalf Of Tim Goodrich
Sent: Thursday, October 13, 2011 2:04 AM
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Which preamp to buy for 2m?
Hi all,
I just got a M2 2M4 and 420-50-11 to mount on my az/el rotor and go with my
736R. As I'm hoping to potentially work some EME with the big guns when
conditions are just right, I'm wondering if anyone can provide advice on
which preamp to get for 2m. I live in the Los Angeles metro area, so lots of
noise/QRM, and also would like something to take advantage of the 736's
preamp switch/voltage over coax option. In other words, something that
doesn't require any complicated power/switching controls, if possible.
Any suggestions?
Thanks,
Tim
K6TW
_______________________________________________
Sent via AMSAT-BB@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------
Message: 15
Date: Thu, 13 Oct 2011 07:49:45 -0700 (PDT)
From: Nader Omer <st2nh@xxxxx.xxx>
To: amsat bb bb <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] SRMVU Entire Pass Vedio Clip !
Message-ID:
<1318517385.65689.YahooMailClassic@xxxxxxxxx.xxxx.xxx.xxxxx.xxx>
Content-Type: text/plain; charset=iso-8859-1
Congratulation to SRMVU team for the great? succes
Without a break to hold a breath ,A continous telemetry? received with the
same data.
Srmvuczzpxc srmvuczzpxc srmvuczzpxcc srmvuczzpxcc srmvuczzpxcc srmvuczzpxcc
etc
Signal was stable and strong .
?INHO for such a simple telemetry? they had missed to give a break? for? the
transmitter .At least for a period of several seconds .
SRMVU entire pass? vedio clip
see the link
http://www.youtube.com/watch?v=FlLt49AMI1c
?
73's
Nader / ST2NH
?
------------------------------
Message: 16
Date: Fri, 14 Oct 2011 00:49:54 +0900
From: Masahiro Arai <m-arai@x.xxxxx.xx.xx>
To: "Trevor ." <m5aka@xxxxx.xx.xx>, amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Re: Horyu-2 437.375 MHz - November ?
Message-ID: <201110131549.AA00673@xxxxx.x.xxxxx.xx.xx>
Content-Type: text/plain; charset=iso-2022-jp
There is no launch info on Horyu web site and JAXA web site. The JAXA
shows the launch will be done by end of March 2012.
http://www.jaxa.jp/projects/in_progress_e.html
Space Calender shows the launch will be in Feb 2012.
http://www2.jpl.nasa.gov/calendar/calendar.html
I think Horyu will not launch in Nov.
Masa JN1GKZ
>The 6.7 kg microsatellite Horyu-2, which has an onboard camera, was planned
to launch from Japan
in November 2011 with GCOM-W 1, e English
>http://tinyurl.com/HoryuMicrosat
>
>73 Trevor M5AKA
>
?
------------------------------
_______________________________________________
Sent via amsat-bb@xxxxx.xxx. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
http://amsat.org/mailman/listinfo/amsat-bb
End of AMSAT-BB Digest, Vol 6, Issue 567
****************************************
Read previous mail | Read next mail
| |